Thanks to the built-in 1500 mAh battery, it is possible to operate the climate meter as a mobile device. As soon as the battery is discharged, it can be recharged via the micro USB interface with a 5 V DC power supply.

The climate meter is therefore used, for example, to check the air quality in offices, workshops, school facilities or in logistics to check the premises for volatile organic substances and formaldehyde.

The readings are stored directly on the climate meter. A memory with 5000 measuring points is available for the air quality meter. After a measurement, the readings can be analyzed on the air quality meter. In addition, the readings from the air quality meter can be transferred to a PC. When connecting the air quality meter to a PC, the air quality meter is recognized as a mass data storage device. This has the particular advantage that the air quality meter works independently of the operating system. The measured values ​​are saved in CSV file format by the air quality meter.

The ozone measuring device AQ-200 is a high-precision measuring device for measuring ozone concentrations in our circulating air. The ozone meter AQ-200 can be equipped with one of four sensor heads for ozone measurement, which differ in their measuring range. Furthermore, sensor heads for other gases are also available for the ozone tester, which are automatically detected when they are plugged into the device. Thus, you can use the ozone tester in many different areas.

The potential applications of the Aeroqual ozone tester within the industry are those of paper, textile or lubricant manufacturing companies that use ozone in their processes for bleaching oils, fats, wax, paper, synthetic fibers, pulp or textiles. A further field of application is the ozone tester Aeroqual after and during cleaning, disinfection and disinfection work which are carried out eg in swimming pools, water treatment plants, or after fire damage and water damage. With the sensor head for the lower measuring range up to 0.150 ppm ozone concentrations can be measured by the ozone tester, which have a negative effect on the human condition.

By using leading GSS technology sensors, the Aeroqual ozone tester has high measurement accuracy and a very long sensor head life. The unique ability to refresh the sensors from the ozone tester offers low cost device maintenance over other sensor technologies. Depending on the model, the measured concentrations can be output via an analog interface with a 0… 5V output signal, written to the internal memory by the ozone tester or transferred to a PC via a USB interface. Optionally, a remote kit is also available, which allows the ozone tester to take measurements in a safe room while the sensor is connected by cable to the ozone tester. Due to the simplicity of operation, the alarm thresholds for visual or audible signaling can be changed in no time. In addition to the measured concentrations, which are displayed in ppm or mg / m³, the LCD display also shows the high and low alarms.

The particle counter PCE-RCM 12 is used for indicative testing of environmental parameters. The particle counter PCE-RCM 12 enables the measurement of CO2, fine dust, temperature and relative humidity. The bright display of the particle counter provides information about these parameters. Environmental monitoring can be done continuously with the particle counter for up to five hours without the device being connected to a power source.

For permanent measurement, the particle counter can be connected to AC power via a USB interface. The rechargeable battery will be recharged within two hours if the air quality monitor is turned off. When measuring carbon dioxide, the meter has a wide measuring range from 0 to 9,999 ppm. The display of the concentrations is further facilitated by the use of a color rating scale, as this provides direct information about the air quality to the user.