Tachometer - Amet Co.,Ltd

T-150 Reflective Tape

Admin Amet — Wed, 19 May 2021 02:22:30 +0000

Monarch’s T-150 Reflective Tape comes in a 150-ft. x 0.5-in. wide roll. Ideal accessory for all Monarch Instrument stroboscopes and tachometers.

The post T-150 Reflective Tape appeared first on Amet Co.,Ltd.

T-50 Reflective Tape

Admin Amet — Wed, 19 May 2021 02:18:21 +0000

Monarch’s T-50 Reflective Tape comes in a 50-ft. x 0.5-in. wide roll. Ideal accessory for all Monarch Instrument stroboscopes and tachometers.

The post T-50 Reflective Tape appeared first on Amet Co.,Ltd.

T-5 Reflective Tape (2-pack)

Admin Amet — Wed, 19 May 2021 02:15:44 +0000

Monarch’s T-5 reflective tape comes in a 5-ft. x 0.5-in. wide roll. Ideal accessory for all Monarch Instrument stroboscopes and tachometers.

The post T-5 Reflective Tape (2-pack) appeared first on Amet Co.,Ltd.

T-5 Reflective Tape (single pack)

Admin Amet — Wed, 19 May 2021 02:12:26 +0000

A single pack roll of Monarch’s T-5 Reflective Tape, 5-ft. roll, 0.5-in. wide. Ideal accessory for all Monarch Instrument stroboscopes and tachometers.

The post T-5 Reflective Tape (single pack) appeared first on Amet Co.,Ltd.

Waterproof Reflective Tape for Optical Sensors

Admin Amet — Wed, 19 May 2021 02:07:07 +0000

Waterproof reflective tape with honeycomb pattern is ideal for use with optical sensors. The tape comes in a 5-ft. x 1-in. wide roll with adhesive backing.

The post Waterproof Reflective Tape for Optical Sensors appeared first on Amet Co.,Ltd.

Latching Plastic Carrying Case

Admin Amet — Wed, 19 May 2021 02:02:14 +0000

The CC-11 Latching Plastic Carry Case features foam die-cut inserts that fit all models of Monarch portable tachometers.

The post Latching Plastic Carrying Case appeared first on Amet Co.,Ltd.

ROSM – Modulated Remote Optical LED Sensor

Admin Amet — Wed, 19 May 2021 01:50:41 +0000

Description

How it works: Instead of being on continuously like our other optical sensors, the LED light source in the ROSM is modulated on and off at a high frequency. That high-frequency light signal is reflected back at the sensor for processing while all other sources of light are filtered out and/or ignored. The ROSM is packaged in a threaded 303 stainless steel tube and has a green LED on-target indicator.

ROSM-P: Modulated Remote Optical Sensor with 8-foot cable, 1/8″ (3.5 mm) phone plug connector, mounting bracket, and 12 inches of reflective tape.

ROSM-W: Modulated Remote Optical Sensor with 22-foot cable with tinned leads, mounting bracket, and 12 inches of reflective tape.

Longer Cable Models and Bulk Sensor Cable are available for any of our sensors. Please give us a call or email us for pricing.

Specifications

SENSORS: P=1/8″ Phone Plug and W=Tinned Wires

Specifications*

MODEL	ROSM-P and ROSM-W
Speed Range	1-20,000 RPM
Illumination	Visible red LED
On-Target Indicator	Green LED on the wire end cap
Operating Range	1 in. [2.5 cm] up to 24 in. [0.6 m] and 45° offset from the target
Operating Temperature	14° to 158°F [-10° to 70°C]
Power Required	5.0 to 24VDC, 50 mA
Output Signal	Positive pulse input voltage 0 to +5 V
Humidity	Maximum relative humidity 80% for temperature up to 88°F [31°C] decreasing, linearly to 50% relative humidity at 104°F [40°C]
Cable Length	ROSM-P: 8 ft. [2.4 m] ROSM-W: 22 ft. [6.7 m]
Material	303 stainless steel; ROSM-P supplied with two M16 jam nuts and mounting bracket
Lens	Acrylic plastic
Dimensions	Threaded tube 2.90 in. x 0.62 in. dia. [M16 x 1.5 x 74 mm]

*Specifications are subject to change without notice.

The post ROSM – Modulated Remote Optical LED Sensor appeared first on Amet Co.,Ltd.

RLS – Rugged Laser Sensor

Admin Amet — Tue, 18 May 2021 10:01:35 +0000

Description

We’ve taken our hugely popular Remote Optical Laser Sensor (ROLS) and packaged it in a Rugged 316L SS IP67 rated enclosure. Although optical speed sensors require atmospheres that are clean and free of mist, steam, dirt, oil, and other contaminants in order to function properly there are times when contamination can occur accidentally. Our Rugged Laser Sensor (RLS) will survive these unintended episodes. Simply clean off the laser and detector windows and your up and running again. The RLS utilizes a watertight M12 connector that facilitates easy removal for cleaning. With an operating range of up to 25 feet, the RLS can be used in applications where close proximity isn’t convenient or safe. The laser light source makes setup incredibly easy. Simply aim the laser at a reflective tape or high contrast target and you’re ready to start measuring. The sensor has an on-target Indicator built-in to confirm that the sensor is detecting the target. The RLS is supplied with a 3-meter cable with a choice of tinned flying leads or a 1/8″ phone plug connector for use with all of our portable tachometers and stroboscopes. You can also extend the cable length by adding our 25-foot extension cable(s).

Note: The RLS24 is not compatible with Monarch portable tachometers, stroboscopes, or the self-powered sensor. Please see RLS-P

Available in 4 variations:

Model RLS-W: Rugged Laser Sensor with removable 3-meter cable, watertight M12 connector to tinned leads, mounting bracket with jam nuts, and 12 inches of T-5 Reflective Tape (4-15VDC input power)

Model RLS24-W: Rugged Laser Sensor with removable 3-meter cable, watertight M12 connector to tinned leads, mounting bracket with jam nuts, and 12 inches of T-5 Reflective Tape (10-24VDC input power)

Model RLS-P: Rugged Laser Sensor with removable 3-meter cable, watertight M12 connector to 1/8″ phone plug connector, mounting bracket with jam nuts, and 12 inches of T-5 Reflective Tape (4-15VDC input power)

Model RLS24-P: Rugged Laser Sensor with removable 3-meter cable, watertight M12 connector to 1/8″ phone plug connector, mounting bracket with jam nuts, and 12 inches of T-5 Reflective Tape (10-24VDC input power)

Features

Rugged IP67 package
316L stainless steel housing
Up to 25 ft. working distance
Standard TTL pulse output (other outputs available)
On Target Indicator
Measure up to 250,000 RPM
Includes mounting bracket and hardware
Includes 12″ of reflective tape
Includes cable with integrated watertight M12 connector.
Choose flying lead or 1/8″ phone plug connection
Compatible with all Monarch tachometers and stroboscopes

COMPATIBILITY

TACHOMETERS	Batteries/Power Supplies		SENSORS W=Tinned Wires; P = 1/8″ Phone Plug
			RLS-W	RLS-P
PLT-200	2/AA	2/AA		X
ACT-1B	12VDC or AC Powered		X
ACT-3X			X
F2A1X			X
F2A3X			X

STROBOSCOPES	Sensors – P = 1/8″ Phone Plug	Lamps
	RLS-P		L1903	L1905
Nova-Strobe dbx	X		X
Nova-Strobe dax	X		X
Palm Strobe x	X			X
Phaser-Strobe pbx	X		X

Specifications*

Speed Range	1-250,000 RPM
Illumination	Visible Red Laser Laser Specs: Classification: Class 2 (Per IEC 60825-1:2014) This product complies with IEC 60825-1 Ed. 3 and 21 CFR 1040.10 and 1040.11 except for deviations pursuant to Laser Notice No 50 of June 2007 Maximum Laser Output: 1mW Pulse Duration: Continuous Laser Wavelength: 650 nm (Visible Red) Beam Divergence: <18 mrad Beam Diameter: 4×7 mm typical at 2 meters Laser Diode Life: 8,000 operating hours MTBF (1-year warranty)
On Target Indicator	Green LED (side-mounted)
Operating Range	Up to 25 feet [7.6 m] and 60 degrees offset from the target
Power Required	RLS-W and RLS-P: 4-15VDC +20% 0.5W RLS24-W and RLS24-P: 10-24VDC ±20% 0.5W
Output	Standard: Open collector with an internal pull-up resistor (5600 ohms) to supply voltage; positive pulse when target is present Note: on 24V unit, output voltage = input voltage – 5V Optional: Negative pulse, true open collector, 3.3V output (TTL) – contact factory
Enclosure	Material: 316L Stainless Steel Dimensions: 0.787″ [20.0 mm] dia. X 4.00″ [101.7 mm] length Rating: IP67
Connection	Watertight M12 connector (at the sensor) with 3-meter cable. Cable termination end can be ordered with 1/8″ phone plug connector (-P) or with tinned leads (-w)

*Specifications are subject to change without notice.

The post RLS – Rugged Laser Sensor appeared first on Amet Co.,Ltd.

IRS – Infrared Sensor with 8 ft. cable

Admin Amet — Mon, 17 May 2021 08:05:03 +0000

Details

The Infrared Optical Sensor has an invisible infrared light source that is ideal for working up to 0.5 in. [12 mm] from high-speed equipment or other applications providing only contrasting light and dark surfaces or beam interruption by solid objects as small as 0.039 in. [1 mm]. The sensor is housed in a threaded 303 stainless steel tube and supplied with a 90-degree angle aluminum-mounting bracket and two M16 jam nuts. The IRS is supplied with an 8 ft. [2.4 m] cable terminated with a 1/8 inch [3.5 mm] male stereo plug (IRS-P) or 4 tinned wires (IRS-W). An optional 25 ft. [7.6 mm] extension cable EC-25P is available with a female socket for the plug on one end, and a 1/8 inch [3.5 mm] male stereo plug on the other.

Specifications*

MODEL	IRS-P IRS-W
Speed Range	1 – 1,000,000 RPM
Illumination	Infrared LED (not visible)
On-Target Indicator	Red/green LED on the wire end cap
Target	Contrasting colors or beam interrupt
Operating Range	Up to 0.5 in. [12 mm] from target
Power Requirement	3.3 – 15VDC @ 40mA
Output Signal	Negative pulse input voltage (+V) to 0
Operating Temperature	-40° to 185°F [-40° to 85°C]
Humidity	Maximum relative humidity 80% for temperature up to 88°F [31°C]; decreasing linearity to 50% relative humidity at 104°F [40°C], humidity must be non-condensing
Connection	1/8 in. [3.5 mm] male stereo plug (IRS-P) Tinned wires (IRS-W)
Standard Cable	8 ft. [2.4 m]
Material	303 stainless steel tube supplied with mounting bracket and two M16 jam nuts
Dimensions	Threaded tube: 2.90 in. x 0.62 in. diameter [M16 x 1.5 x 74 mm] long

*Specifications are subject to change without notice.

The post IRS – Infrared Sensor with 8 ft. cable appeared first on Amet Co.,Ltd.

ROLS – Remote Optical Laser Sensor

Admin Amet — Fri, 14 May 2021 08:59:26 +0000

Description

1-250,000 RPM. Extremely versatile and able to work over long distances (up to 25 feet). The ROLS-W (tinned wire termination) and ROLS-P (1/8″ phone plug termination) are threaded stainless steel remote optical sensors with a visible red laser light source. All these sensors have the on-target green LED indicator.

Model ROLS-P: Remote Optical Laser Sensor with 8 ft. cable, 1/8″ (3.5 mm) phone plug connector, mounting bracket with jam nuts, and 12 inches of T-5 Reflective Tape

Model ROLS-P-25: Remote Optical Laser Sensor with 25 ft. cable, 1/8″ (3.5 mm) phone plug connector, mounting bracket with jam nuts, and 12 inches of T-5 Reflective Tape

Model ROLS-W: Remote Optical Laser Sensor with 8 ft. cable, 3 tinned leads, mounting bracket with jam nuts, and 12 inches of T-5 Reflective Tape

Model ROLS24-W: Remote Optical Laser Sensor with 24VDC input power, 8-foot cable, 3 tinned leads, mounting bracket with jam nuts, and 12 inches of T-5 Reflective Tape

Model ROLS24-W-25: Remote Optical Laser Sensor with 24VDC input power, 25-foot cable, 3 tinned leads, mounting bracket with jam nuts, and 12 inches of T-5 Reflective Tape

Longer Cable Models and Bulk Sensor Cable are available for any of our sensors. Please give us a call or email us for pricing.

Features

COMPATIBILITY

TACHOMETERS	Batteries/Power Supplies		SENSORS W=Tinned Wires; P = 1/8″ Phone Plug
			ROLS-W	ROLS-P
PLT-200	2/AA	2/AA		X
ACT-1B	12VDC or AC Powered		X
ACT-3X			X
F2A1X			X
F2A3X			X

STROBOSCOPES	Sensors – P = 1/8″ Phone Plug	Lamps
	ROLS-P		L1903	L1905
Nova-Strobe dbx	X		X
Nova-Strobe dax	X		X
Palm Strobe x	X			X
Phaser-Strobe pbx	X		X

Specifications

W= tinned wire leads, P= 1/8″ [3.5 mm] stereo phone plug termination).

MODEL	ROLS-P ROLS-W
Specifications*	CE marked
Speed Range	1-250,000 RPM
Illumination	Visible Red Laser, Class 2 (per IEC 60825-1:2014).
Classification	This product complies with IEC60825-1 Ed. 3 and 21 CFR 1040.10 and 1040.11 except for deviations pursuant to Laser Notice No. 50 of June 2007
Max Laser Output	1mW max
Pulse Duration	Continuous
Laser Wavelength	650 nm (visible red)
Beam Divergence	< 18 mrad
Beam Diameter	4 x 7 mm typical at 2 m
Laser Diode Life	8,000 operating hours MTBF (1-year warranty)
On-Target Indicator	Green LED on the wire end cap
Operating Range	Up to 25 feet [7.6 meters] and 60 degrees offset from the target
Power Requirement	ROLS: 3.3 – 15VDC, 0.4W max ROLS24-W: 24VDC ±10%, 0.4W max NOTE: 24VDC power input option available see ordering information.
Output	ROLS: Open collector with an internal pull-up resistor to supply voltage; positive pulse when target present; Output Voltage = Supply Voltage ROLS24-W: Open collector with an internal pull-up resistor (5600 ohms) to supply voltage minus ~5V; positive pulse when target is present Optional Outputs Available – Open Collector or TTL pulse (3.3VDC), Negative pulse (Contact factory)
Operating Temp	14°F to 158°F [-10°C to 70°C]
Humidity	Maximum relative humidity 80% for temperature up to 88°F [31°C] decreasing linearly to 50% relative humidity 104°F [40°C]
Connection	3.5 mm [1/8 inch] male stereo plug (ROLS-P); Tinned wires (ROLS-W)
Material	303 stainless steel supplied with two M18 jam nuts and mounting bracket
Lens	Acrylic plastic
Dimensions	Threaded tube 3.12 in. x 0.71 in. diameter [18 x 1.5 x 79.4 mm] long

*Specifications are subject to change without notice.

The post ROLS – Remote Optical Laser Sensor appeared first on Amet Co.,Ltd.