The post Pressure Gauge PCE-P15 appeared first on Amet Co.,Ltd.

The post Pressure Gauge PCE-N30U appeared first on Amet Co.,Ltd.

The post Power Analyzer PCE-P43 appeared first on Amet Co.,Ltd.

The post Power Analyzer Easycount 3 appeared first on Amet Co.,Ltd.

power analyser with RS-232 interface and software to analyse power consumption

The PCE-PA6000 power analyser is a tabletop device for measuring effective power, apparent power, power factor, energy consumption, current, continuous voltage, resistance and frequency. The power analyser also offers the possibility to connect industrial current converters with a transmission relation of 100/5A or 1000/5A. Its large 93 x 52mm LCD is easy to read and provides a variety of results, including Watts, cos φ, ACV and ACA. With the optional PCE-PA ADP current adaptor with ground wire (up to 10ACA) it can safely and quickly measure and analyse with the help of the power analyser. Measurement of current and power can be done directly with test cables that come with the device or indirectly using the clamps. The device has an RS-232 interface, and software* to analyse results and transfer data to a computer. This makes it the ideal device for any workshop or for measuring power to determine faults in devices.

*Soft-lut-usb software is available in the accessories tab

– Multimeter function

– Measurement of direct current connecting a sensor head or current clamp

– Measures effective and apparent power

– Measures power factor

– Measures energy consumption (kWh)

– Data hold / Peak hold

– Function Hold / Alarm function High / Low

– Interface RS-232

– Powered by mains adaptor or batteries

– incl. ISO Calibration Certificate

– Safety standards: IEC-1010-1; CAT II 600V

This image shows the optional PCE-PA-ADP current adaptor

Amp clamp adaptor for measuring current indirectly up to 1000A without interrupting the conductor.
– Range: 200 / 1000DCA / ACA
– Accuracy: ±1.5 / 2%
– DCA zero reset
– Dimensions: 190 x 64 x 33mm
– Maximum diameter of the conductor: 33.5mm

Amp clamp adaptor for the
PCE-PA 6000 power meter

 
The images above show the software which is used to analyse data and is supplied with the power meter. It can show 4 measurement values at a time and the graphic display can easily store data over an extended period to be analysed later.

The post Power Quality Analyzer PCE-PA6000-ICA incl. ISO Calibration Certificate appeared first on Amet Co.,Ltd.

This image shows the optional PCE-PA-ADP current adaptor

Amp clamp adaptor for measuring current indirectly up to 1000A without interrupting the conductor.
– Range: 200 / 1000DCA / ACA
– Accuracy: ±1.5 / 2%
– DCA zero reset
– Dimensions: 190 x 64 x 33mm
– Maximum diameter of the conductor: 33.5mm

Amp clamp adaptor for the
PCE-PA 6000 power meter

Technical specifications
Function	Measurement range; Accuracy; Resolution
Measurement of real power (AC, real value of power), direct measurement	1 W … 6 kW; 1 W; ±1,5 % + 1 dgt.
Measurement of real power (AC, real value of power), with adaptor ext. or current converter	1 W … 999,9 kW; 1 W; ±1,5 % + 1 dgt.
Measurement of apparent power (AC)	0.01VA to 9.999kVA; 0.01VA; ±1.5% +1 digit
Power factor (cos φ)	0.00 to 1.00; 0.01; ±1.5% +2 digit
KWh counter	0.001Wh to 9,999kWh; 0.001Wh; ±1% +1 digit
ACV / DCV	0.1V to 600V; 0.1 / 1V; ±1% +1 digit
ACA eff/rms DCA eff/rms	direct maximum 10A; 10mA, with induction head max. 1,000A;1A; ±1% +1 digit
ACA with clamps	up to 2,000A (depending on clamps)
Frequency	10.0 to 999Hz; 0.1Hz; 1% +1 digit
Ohms	1 Ω to 19.99kΩ; 1 / 10 Ω; ±1% +1 digit
Display	93 x 52mm multi functional LCD
Operating conditions	max. 80% r.h. / 0 to 50°C / 32 to 122°F
Power	6 AA batteries or mains adaptor
Dimensions	280 x 210 x 90 mm / 11 x 8.2 x 3.5 in
Weight	1,600 g / 56.4 oz
Examples of use
In the following image there is a PCE-PA 6000 being used to repair a computer. Using the current adaptor, it can quickly take measurements of consumption and measurements of power without the need to use too many cables.
	Here is an image of the power meter’s large LCD that can show four different readings simultaneously. The display mode depends on the function setting. It can also show readings taken by the current adaptor. It just needs to be connected to the device with the grounding wire of the adaptor.
In this instance, the device is being used to test the thermal value of an electronic thermal ventilator once repaired with our PCE-PA 6000 power meter. The usefulness of the current adaptor can be appreciated here, and it is easy to attach safely without the mess of external cables. With the power meter, tests can be done easily, safely and accurately an all types of small electrical appliances up to 10A, including high consumer electronics.

The post Power Quality Analyzer PCE-PA6000 appeared first on Amet Co.,Ltd.

PCE-PA 8000 is a portable handheld power analyzer used for the testing and inspection of 3-phase / 4-wire, 3-phase / 3-wire, 1-phase / 2-wire and 1-phase / 3-wire electrical circuits. This handy power quality analyzer not only measures multiple electrical properties in real time, but also saves the measurement data in .xls format to the included SD card memory for quick and easy data transfer and analysis using Microsoft Excel.

The PCE-PA 8000 power analyzer provides true RMS measurements of current and voltage. The power analyzer also determines power factor (PF), phase angle (Φ), active power, apparent power and reactive power. The three current clamps included with the power analyzer can be used on wires and cables with a diameter of 2.0″ / 50 mm, allowing for use with the power grid. Also included in the delivery contents are four alligator clips, four test leads and an SD card. For real-time current, voltage and power consumption measurements at a glance, the PCE-PA 8000 features an easy-to-read 3.7″ / 94 mm (320 x 240 pixel) LCD screen with backlight.

– True RMS measurement for ACA, ACV
– True power: W, KW, MW
– VA, KVA, MVA, VAR, KVAR, MVAR
– PF (power factor), phase angle (Φ)
– KWH, KVAH, KVARH, PFH
– Voltage measurement range: 10 … 600 ACV
– Current measurement range: 0.2 … 1200 ACA
– Real-time current, voltage and power consumption measurement
– Built-in data recorder with adjustable rate: 2 … 7,200 sec.
– Saves date- and time-stamped measurement data sets
– Complies with IEC 1010 and CAT III 600 V safety standards
– Includes current clamps, alligator clips, test leads, SD card memory and 2-year warranty against manufacturer defects
– incl. ISO Calibration Certificate
– USB data cable with software and spare AC power adapter sold separately – see accessories for details

The post Power Analyzer PCE-PA 8000-ICA incl. ISO Calibration Certificate appeared first on Amet Co.,Ltd.

The PCE-830-3 3-phase-power meter is used for measuring one to three phases of electrical quantities for alternating current (AC). This 3-phase-power meter also measures such parameters as voltage, current, frequency, harmonics and power as well as indicting, according to standard EN50160, harmonic values, interharmonics and asymmetrics. Interference, such as interruptions, leaks, overloads or transience (from 16µs) are detected with their corresponding values. The backlit LCD, with high resolution, can show up to 35 parameters simultaneously. It can have up to 3 clips attached at the same time. In data logger mode, it can save up to 17,470 readings (3 phases / 4 conductors), in a simpler set up (1 fase / 2 conductors) it can save up to 52,400 readings, split into 85 groups. All this makes the PCE-830-3 3-phase-power meter the ideal instrument for taking measurements over long durations. Measurement values obtained can be sent to a computer and be processed with the analysis software which comes included. The device comes with everything needed to being measuring and analyzing from the moment the device arrives. Although the 3-phase-power meter comes calibrated from the manufacturer, an optional laboratory calibration and certificate, that meets ISO standards, can be ordered seperately with the device or when a recalibration is required.

– Analysis of a network of 3 phases / 4 conductors, 3 phases / 3 conductors, 1 phase / 2 conductors, 1 phase / 3 conductors
– Measures effective real value (V 123 and I 123)
– Measures active power (W, KW, MW, GW)
– Measures apparent and reactive power (KVA, KVAR)
– Power Factor (PF), phase angle (Φ)
– Measures energy and work (Wh, KWh, KVARh, PFh)
– Measures current from 0.1 mA to 3000 A, allowing for the reserve power of a factory to be determined
– Large LCD that shows up to 35 parameters simultaneously (3P4W [=3 phases/4 conductors])
– CT conditions (1 to 600) and PT (1 to 3000) are programmable
– Indicates current wave forms and voltage overlap.
– 512 KB of memory with programmable intervals to save data every 2 to 3000 seconds, 17,470 readings using the system of 3 phases / 4 conductors
– Indicates wave forms, efficiency parameters, and harmonic distortion
– Backlit LCD with dot matrix
– Average power (AD in W, KW, MW)
– Maximum power (MD in W, KW, MW) with the programmable period
– Analysis of harmonic distortion up to a curvature of 99
– Indication of up to 50º form of harmonic wave
– Indication of the wave form with maximum value (1024 readings / period)
– Analysis of absolute distortion (%THD-F)
– Diagram of graphic equilibrium with parameters of a 3 phase system
– Detects up to 28 transistors (time and cycles) with a programmable threshold (%)
– Relation of 3 phases of voltage or asymmetrical current (VUR)
– Factor of 3 phases of voltage and asymmetrical current (d0%, d2%)
– USB port (optically insulated)
– Integrated timer and calendar to record data
– Maximum diameter of the electrical conductor for the amp clamp: the PCE-6801 ~30 mm / 1.2 in, PCE-6802 ~55 mm / 2.2 in, PCE-3007 ~170 mm / 6.7 in

The post Three Phase Power Analyzer incl. ISO Calibration Certificate PCE-830-3-ICA appeared first on Amet Co.,Ltd.

The post Three Phase Power Analyzer incl. ISO Calibration Certificate PCE-830-2-ICA appeared first on Amet Co.,Ltd.

The post Three Phase Power Analyzer incl. ISO Calibration Certificate PCE-830-1-ICA appeared first on Amet Co.,Ltd.