Air Flow Meter - Amet Co.,Ltd

Air Flow Meter CWG 1

Admin Amet — Tue, 19 Jan 2021 09:23:19 +0000

Air Flow Meter CWG 1
Compact wind sensor with 4 … 20 mA output

Compact wind sensor CWG1 for weather monitoring. Basic cup anemometer with 4 … 20 mA output.

– Basic wind transmitter
– 12 m connection cable
– Easy assembly
– 4 … 20 mA output


Output	4 … 20 mA
Measurement reading range	0 … 50 m/s
Accuracy	± 0,5 m/s or 3 % v.M
Load	Max. 80 m/s temporary
Load	500 Ohm at 15 V operating voltage
Power supply	9 … 30 V AC / DC max. 50 mA
Assembly	on mast tube
Heating	max. 24 V DC/AC, max. 20 W
Ambient temperature	-25 … +60°C (in ice-free conditions)
Cable	12 m; LiYY 6 x 0,25 mm²
Protection class	IP54
Weight	approx. 500g

The post Air Flow Meter CWG 1 appeared first on Amet Co.,Ltd.

Air Flow Meter PCE-WSAC 50W 230

Admin Amet — Tue, 19 Jan 2021 09:20:48 +0000

PCE-WSAC 50W 230 Air Flow Meter
Radio anemometer warning system / Wind monitoring on construction cranes / 4 … 20-mA analog output / Power supply 110 … 230V AC

Air Flow Meter PCE-WSAC 50W 230 is primarily used to measure and monitor the wind load on cranes or wind turbines. Furthermore, the wind situation can be measured and analyzed before commissioning a wind turbine. The Wind Speed Meter PCE-WSAC 50W 230 is equipped with alarm relay for a pre-alarm or main alarm.

Due to the high measuring range of up to 50 m / s of the anemometer, stormy gusts can also be monitored. The radio range of the anemometer is in the open field up to 750 m / 2500 ft in the free frequency band of 2.4 GHz. When installing the display of the anemometer PCE-WSAC 50W 230 in buildings, a range of up to 60 m / 200 ft can be achieved for the wind sensor. Due to the integrated 4 … 20-mA analogue output of the wind alarm display, the measured data can also be transferred to other controllers for evaluation.

– Robust plastic housing
– Units: km / h, mph, m / s
– 4 … 20-mA analog output
– 128 x 64 pixel LC display
– Alarm relay
– Measuring range up to 180 km / h
– Durable stainless steel ball bearings
– Ambient temperature -20 … 70°C / -4 … 158°F
– Radio transmission

The post Air Flow Meter PCE-WSAC 50W 230 appeared first on Amet Co.,Ltd.

Air Flow Meter PCE-WSAC 50W 24-ICA Incl. ISO Calibration Certificate

Admin Amet — Tue, 19 Jan 2021 09:19:12 +0000

PCE-WSAC 50W 24-ICA Air Flow Meter incl. ISO calibration certificate
Radio Wind Warning System / Wind Monitoring on Construction Cranes / 4 … 20-mA analog output / Power supply 110 … 230V AC or +24V DC

The air flow meter PCE-WSAC 50W is primarily used to measure and monitor the wind load on cranes or wind turbines. Furthermore, the wind situation can be measured and analyzed before commissioning a wind turbine. The wind speed meter PCE-WSAC 50W is equipped with alarm relay for a pre-alarm or main alarm.

Due to the high measuring range of up to 50 m / s of the wind speed meter, stormy gusts can also be monitored. The radio range of the wind speed meter is in the open field up to 750 m / 2500 ft in the free frequency band of 2.4 GHz. When installing the display of the wind alarm PCE-WSAC 50W in buildings, a range of up to 60 m / 200 ft can be achieved for the wind sensor. Due to the integrated 4 … 20-mA analogue output of the wind alarm display, the measured data can also be transferred to other controllers for evaluation.

The post Air Flow Meter PCE-WSAC 50W 24-ICA Incl. ISO Calibration Certificate appeared first on Amet Co.,Ltd.

Air Flow Meter PCE-WSAC 50W 230-ICA incl ISO calibration certificate

Admin Amet — Tue, 19 Jan 2021 09:17:45 +0000

PCE-WSAC 50W 230 Air Flow Meter incl ISO calibration certificate
Radio anemometer warning system / Wind monitoring on construction cranes / 4 … 20-mA analog output / Power supply 110 … 230V AC

Air Flow Meter PCE-WSAC 50W 230 is primarily used to measure and monitor the wind load on cranes or wind turbines. Furthermore, the wind situation can be measured and analyzed before commissioning a wind turbine. The wind speed meter PCE-WSAC 50W 230 is equipped with alarm relay for a pre-alarm or main alarm.

Due to the high measuring range of up to 50 m / s of the wind speed meter, stormy gusts can also be monitored. The radio range of the wind speed meter is in the open field up to 750 m / 2500 ft in the free frequency band of 2.4 GHz. When installing the display of the wind speed meter PCE-WSAC 50W 230 in buildings, a range of up to 60 m / 200 ft can be achieved for the wind sensor. Due to the integrated 4 … 20-mA analogue output of the wind alarm display, the measured data can also be transferred to other controllers for evaluation.

The post Air Flow Meter PCE-WSAC 50W 230-ICA incl ISO calibration certificate appeared first on Amet Co.,Ltd.

Air Flow Meter PCE-WSAC 50W 24

Admin Amet — Tue, 19 Jan 2021 09:16:12 +0000

PCE-WSAC 50W 24 Air Flow Meter
Radio Wind Warning System / Wind Monitoring on Construction Cranes / 4 … 20-mA analog output / Power supply 110 … 230V AC or +24V DC

Display of air flow meter PCE-WSAC 50W 24
Entrance	Pulse, analog (4 … 20-mA) or radio
Radio	IEEE 802.15.4 ISM 2.4 GHz
Units	km / h, mph, m / s
Power supply for sensors	+15V DC
Analog output	4 … 20-mA
Maximum input impedance	500 Ω
Resolution of the analog output	10 bits
Accuracy of the analog output	± 1.5%
Alarm relay	Max. 250V AC, 8 A
Display	Backlit 128 x 64 pixel LC display
Casing	Robust plastic housing
Protection class	IP65
Dimensions	145 x 95 x 125 mm / 5.7 x 3.7 x 4.9 in
Weight	650 g / 1.4 lbs

Sensor of wind speed meter PCE-WSAC 50W
Measuring range	4 … 180 km / h
Minimum start speed	8 km / h
Accuracy	± 1 km / h in the range 4 … 15 km / h
	± 3% in the range 16 … 180 km / h
Power supply	Battery mono cell D 1.5V DC
Power consumption	Approx. 0.3 W with 1.5V DC power supply
Housing material	PA + FG
Ball-bearing	Stainless steel X65Cr13
Holder	Stainless steel AISI 304
Weight (with standard bracket)	About 680 g / 1.5 lbs
Weight with self-leveling bracket	About 900 g / 2 lbs
Dimensions	320 x 110 x 100 mm / 12.6 x 4.3 x 3.9 in
Storage temperature	-35 … 70°C / -31 … 158°F
Ambient temperature	-20 … 70°C / -4 … 158°F
Protection	IP65

The post Air Flow Meter PCE-WSAC 50W 24 appeared first on Amet Co.,Ltd.

Air Flow Meter KWS 1

Admin Amet — Tue, 19 Jan 2021 09:14:27 +0000

Simple wind meter with pulse output / With wind direction sensor /
suitable for PCE-WL1 und PCE-WL2

Wind meter KWS1 for, for example, PCE-WL windlogger. Simple cross-hair anemometer with pulse output and wind direction sensor

– Basic wind transmitter
– 3 m connection cable
– Easy assembly
– Compatible with PCE-WL 1 and PCE-WL 2

Technical Specification
Output wind speed	0 … 100 Hz
Measuring range wind speed	0.9 … 40 m/s
Accuracy wind speed	± 0.5 m/s or 5 % v. M
Load wind speed	max. 60 m/s short-term
Contact load	10 VA, max. 42 V DC, max. 0.4 A
Measuring range wind direction	5 … 355 °
Sensor Wind direction	0 … 1 kOhm
Assembly	Pipe mounting 31 mm
Environmental temperature	-25 … +60 °C (with ice-free)
Cable	3 m; LiYY 4 x 0.5 mm²
Protection class	IP54
Dimensions	418 x 30mm
Weight	ca. 1000g

The post Air Flow Meter KWS 1 appeared first on Amet Co.,Ltd.

Air Flow Meter CWR1

Admin Amet — Tue, 19 Jan 2021 09:07:31 +0000

Air Flow Meter CWR1
Compact wind sensor with 4 … 20 mA output

Compact wind sensor CWR1 for weather monitoring. Basic wind vane meter with 4 … 20 mA output. Wind sensor CWR1 with 4 … 20 mA output. Measurement of the horizontal wind direction with an analogue output signal. The vanes of the wind sensor are manufactured from synthetic material and the housing is made of anodized aluminium. For mounting purposes, the device is supplied with a threaded spigot (Page 21) with two fixing nuts.

– Simple wind transmitter
– 12 m connection cable
– Easy assembly
– 4 … 20 mA output

Technical Datas
Output	4 … 20 mA
Measurement reading range	0 … 360°
Accuracy	11,25°
Load	max. 80 m/s temporary
Load	500 Ohm at 15 V operating voltage
Power supply	9 … 30 V AC / DC max. 50 mA
Assembly	on mast tube
Heating	max. 24 V DC/AC, max. 20 W
Ambient temperature	-25 … +60°C (in ice-free conditions)
Cable	12 m; LiYY 6 x 0,25 mm²
Protection class	IP54
Weight	approx. 500g

The post Air Flow Meter CWR1 appeared first on Amet Co.,Ltd.

Air Flow Meter PCE-WS RS485

Admin Amet — Tue, 19 Jan 2021 09:05:16 +0000

Robust Air Flow Meter for fixed installation / various output signals /

for wind warning systems, building services and building automation

The Air Flow Meter impresses with its compact design and various output signals. The Air Flow Meter can be used for applications in warning technology, building automation and home technology. Depending on the Wind Speed Meter, a 4 … 20 mA, 0 … 10 V, Modbus or pulse output is available. The Air Flow Meter is designed as a star, so that operation independent of the wind direction is guaranteed.

The Air Flow Meter is made of robust plastic and is therefore resistant to rust and corrosion. The Air Flow Meter is also protected to IP65. The design of the Air Flow Meter also ensures that it is particularly protected against high-frequency and electromagnetic radiation. The measuring range extends between 2.62 … 164.04 ft/s, 0.8 … 50 m / s. The Air Flow Meter has a 65 ft, 20 m connection cable as standard. A stainless steel mounting kit for the Air Flow Meter is optionally available.

– Robust PA plastic housing

– IP 65 protection

– mA, V, pulse or Modbus output

– Long lifetime

– Direct measurement of wind speed

– Measurement from 2.62 ft/s, 0.8 m / s

Measuring range	2.62 … 164.04 ft/s, 0.8 m / s … 50 m / s
Measurement from	≤2.62 ft/s, 0.8 m / s
Output	Modbus RTU
Accuracy	<13.12 ft/s: ± 0.89 ft/s, <4 m / s: ± 0.27 m / s
	> 13.12 ft/s: ± 3%, > 4 m / s: ± 3%
Operating voltage	12 … 30 V DC
Operating temperature range	-4 … +185 ° F, -20 … +80 ° C at ≤95% rel. humidity
Maximum wind speed	180.45 ft/s, 123 mph, 55 m / s
Electrical connection	65 ft, 20 m connection cable
Protection class	IP65

The post Air Flow Meter PCE-WS RS485 appeared first on Amet Co.,Ltd.

Air Flow Meter PCE-WS CR

Admin Amet — Tue, 19 Jan 2021 09:02:51 +0000

Robust Air Flow Meter for fixed installation / various output signals /
for wind warning systems, building services and building automation

The Air Flow Meter impresses with its compact design and various output signals. The wind speed meter can be used for applications in warning technology, building automation and home technology. Depending on the wind speed meter, a 4 … 20 mA, 0 … 10 V, Modbus or pulse output is available. The wind speed meter is designed as a star, so that operation independent of the wind direction is guaranteed.

The wind speed meter is made of robust plastic and is therefore resistant to rust and corrosion. The wind speed meter is also protected to IP65. The design of the wind speed meter also ensures that it is particularly protected against high-frequency and electromagnetic radiation. The measuring range extends between 2.62 … 164.04 ft/s, 0.8 … 50 m / s. The wind speed meter has a 65 ft, 20 m connection cable as standard. A stainless steel mounting kit for the wind speed meter is optionally available.

– Robust PA plastic housing
– IP 65 protection
– mA, V, pulse or Modbus output
– Long lifetime
– Direct measurement of wind speed
– Measurement from 2.62 ft/s, 0.8 m/s

Measuring range	0.8 m/s … 50 m/s, 2.62 … 164.04 ft/s
Measurement from	≤0.8 m/s, ≤2.62 ft/s
Output	Adjustable relay
Accuracy	<4 m/s: ± 0.27 m/s, <13.12 ft/s: ± 0.89 ft/s
	>4 m/s: ± 3 %, >13.12 ft/s: ± 3%
Operating voltage	12 … 24 V DC
Operating temperature range	-20 … +80 °C, -4 … +185 ° F at ≤95 % rel. humidity
Maximum wind speed	55 m/s, 180.45 ft/s, 123 mph
Electrical connection	20 m, 65 ft connection cable
Protection class	IP65

The post Air Flow Meter PCE-WS CR appeared first on Amet Co.,Ltd.

Air Flow Meter KWG2

Admin Amet — Tue, 19 Jan 2021 09:01:08 +0000

Air Flow Meter KWG2
Basic wind transmitter with impulse output / heating

Basic wind transmitter for monitoring tasks. Ideal measuring transducers for basic requirements and appropriate for cost effective solutions. The technology focuses on the basic requirements necessary and to ensure longevity, all moving and supporting parts are manufactured using durable synthetic materials.

– Basic wind transmitter
– 3 m connection cable
– Easy assembly
– 0 … 10 V output

Technical Datas
Output	0 … 10 V
Measurement reading range	0.9 … 40 m/s
Accuracy	± 0.5 m/s or 5 % v. M
Load	max. 60 m/s (temporary)
Contact Load	10 VA, max. 42 V DC, max. 0,4 A
Assembly	mounting bracket
Heating	max. 24 V DC/AC, max. 1 A
Ambient temperature	25 … +60 °C (in ice-free conditions)
Cable (selectable)	3 m; LiYY 4 x 0,5 mm²
Protection class	IP54
Dimensions	Ø 134 x 160 mm
Weight	ca. 300g

The post Air Flow Meter KWG2 appeared first on Amet Co.,Ltd.