Electrical Tester - Amet Co.,Ltd

Electrical Tester PKT-1260

Admin Amet — Wed, 10 Feb 2021 02:45:29 +0000

Electrical Tester PKT-1260 with high-resolution TFT / USB port for real-time data transmission / 20 automatic measurement modes and FFT function

Digital storage electrical tester of the latest generation with high-resolution color display, backlight, high bandwith and high sampling rate, VGA-output, large internal memory, USB port and LAN connection for integration into networks. The amazing value for money and modern technology allows a wide range of applications in education, service and quality assurance area.

– high-resolution TFT color display with 800 x 600 pixels and 65536 colors- USB port for real-time data transmission or reading of internal memory

– saving of measured values and graphics directly onto the USB-stick

– VGA-output port for external monitor

– autoset and autoscale function for easy operation

– LAN connection for remote acces via network- internal memory of 10 million points per channel or 15 waveforms

– 20 automatic measurement modes and FFT function

– PASS/FAIL function

– safety: EN 61010-1; CAT II

Technical data

Bandwidth

200 MHz

Display

20 cm (8”) TFT with 65536 colors

Resolution

800 x 600 Pixel

Channel

2 CH

Measurement acqisition

Sampling mode

normal/peak detect/average

Sampling rate each Channel

1 GSa/s

Input

Input coupling

AC, DC, GND

Input impedance

1 MΩ +/- 2 % in parallel with 15 pF +/- 5 pF

Input voltage

400 V DC or ACpp

Vertical systems

Sensitivity

2 mV – 10 V/Skt/div.

Rise time

< 1,7 ns

Accuracy

+/- 3 %

Vertical resolutions

8 Bits (2 CH simultaneously)

Horizontal systems

Horizontal scale

1ns-100s/Skt./div

Sampling range

0,5 – 250 S/s

Trigger

Trigger type

Edge/Video/Pulse/Slope

Trigger mode

Auto, Normal, Single

Trigger coupling

DC, AC, LF, HF

Measurements

20 automat. measurements

peak-peak, cycle RMS, Vmax, Vmin, Vtop, Vbase, Vamp, overshoot, preshoot, rise time, fall time, +width, -width, +duty, -duty, delay A→B (rising), delay A→B(falling), frequency, period, min, max

Phase difference

+/- 3°

Record

Record length

10.000.000 points/CH

Common specifications

Interfaces

USB, VGA, LAN

Operation voltage

100 ~ 240 V ACrms / 50/60 Hz

Dimensions (WxHxD)

340 x 155 x 70 mm

Weight

1,8 kg

The post Electrical Tester PKT-1260 appeared first on Amet Co.,Ltd.

Electrical Tester PCE-PA 8300

Admin Amet — Wed, 10 Feb 2021 02:38:30 +0000

PCE-PA 8300 Electrical Tester
3-phase / 3 current clamps / LCD graphic display / SD card memory

The PCE-PA 8300 is a Electrical Tester that features a durable enclosure, SD card memory, a LCD graphic display, as well as apparent, effective, and reactive power measurement. The easy-to-use PCE-PA 8300 Electrical Tester is the ideal tool for performing power and harmonics analysis as well as for measuring network capacity.

The PCE-PA 8300 is available for purchase in two different configurations:

Set 1: Includes 3 current clamps for measurements up to 1200 A AC
Set 2: Includes 3 flexible Rogowski coils for measurements up to 3000 A AC (for an additional fee)

Please choose either Set 1 or Set 2 before adding the PCE-PA 8300 to your cart.

– Voltage measurement range of 10 V … 600 V AC
– Current measurement range of 20 A … 1200 A AC (Set 1) or 30 A … 3000 A AC (Set 2)
– Performance measurement range of 0 kW … 9.999 MW (VA/VAR)
– Simultaneous display of harmonics and waveform
– Graphic Phasor diagram
– Captures transients including dip, swell, and outage
– SD card memory
– LCD graphic display
– Durable enclosure
– Compatibility with various manufacturers’ power clamps
– Adjustable back-up interval, allowing for long-term data collection
– Auto-setting of measurement range (AC V)
– Power efficiency, delay angle, and frequency measurement
– Apparent, effective, and reactive power measurement
– Harmonic spectrum measurement up to the 50th order

Electrical specifications
Voltage Measurement (AC V)
Measurement Range	Resolution	Accuracy
10 V … 600 V (phase to neutral)	0.1 V	±(0.5 % + 0.5 V)
10 V … 600 V (phase to phase	0.1 V	±(0.5 % + 0.5 V)
Current Measurement (AC A) Set 1
Measurement Range	Resolution	Accuracy
20 A	0.001 A (< 10 A) 0.01 A (≥ 10 A)	± (0.5 % + 0.1 A)
200 A	0.01 A (< 100 A) 0.1 A (≥ 100 A)	± (0.5 % + 0.5 A)
1200 A	0.1 A (< 1000 A) 1 A (≥ 1000 A)	± (0.5 A + 5 A)
Current measurement (AC A) Set 2
Measurement range	Resolution	Accuracy
30 A	0.001 A (< 10 A) 0.01 A (≥ 10 A)	±(0.5 % + 0.1 A)
300 A	0.01 A (< 10 A) 0.1 A (≥ 10 A)	±(0.5 % + 0.5 A)
3000 A	0.1 A (< 1000 A) 1 A (≥ 1000 A)	±(0.5 A + 5 A)
Effective power
Measurement range	Resolution	Accuracy
0 KW … 9.999 KW	0.001 KW	±(1 % + 0.008 KW)
10 KW … 99.99 KW	0.01 KW	±(1 % + 0.08 KW)
100 KW … 999.9 KW	0.1 KW	±(1 % + 0.8 KW)
1 MW … 9.999 MW	0.001 MW	±(1 % + 0.008 MW)
Apparent Power
Measurement range	Resolution	Accuracy
0 KVA … 9.999 KVA	0.001 KVA	±(1 % + 0.008 KVA)
10 KVA … 99.99 KVA	0.01 KVA	±(1 % + 0.08 KVA)
100 KVA … 999.9 KVA	0.1 KVA	±(1 % + 0.8 KVA)
1 MVA … 9.999 MVA	0.001 MVA	±(1 % + 0.008 MVA)
Reactive Power
Measurement range	Resolution	Accuracy
0 KVAR … 9.999 KVAR	0.001 KVAR	±(1 % + 0.008 KVAR)
10 KVAR … 99.99 KVAR	0.01 KVAR	±(1 % + 0.08 KVAR)
100 KVAR … 999.9 KVAR	0.1 KVAR	±(1 % + 0.8 KVAR)
1 MVAR … 9.999 MVAR	0.001 MVAR	±(1 % + 0.008 MVAR)
Active Energy
Measurement range	Resolution	Accuracy
0 KWH … 9.999 KWH	0.001 KWh	±(2 % + 0.008 KWh)
10.00 KWH … 99.99 KWH	0.01 KWh	±(2 % + 0.08 KWh)
100.0 KWH … 999.9 KWH	0.01 KWh	±(2 % + 0.8 KWh)
1 MWH … 9.999 MWH	0.001 MMh	±(2 % + 0.008 MWh)
Apparent Energy
Measurement range	Resolution	Accuracy
0 KVARH … 9.999 KVARH	0.001 KVARh	± (2 % + 0.008 KVARh)
10.00 KVARH … 99.99 KVARH	0.01 KVARh	± (2 % + 0.08 KVARh)
100.0 KVARH … 999.9 KVARH	0.01 KVARh	± (2 % + 0.8 KVARh)
1 MVARH … 9.999 MVARH	0.001 MVARh	± (2 % + 0.008 MVARh)
Power Factor
Measurement range	Resolution	Accuracy
0 … 1	0.01	± 0.04
Delay Angle
Measurement range	Resolution	Accuracy
-180° … +180°	0.1°	±1°
Frequency
Measurement range	Resolution	Accuracy
45 Hz … 65 Hz	0.1 Hz	± 0.1 Hz
Harmonic of AC Voltage at 50 / 60 Hz
Measurement range	Resolution	Accuracy
1 … 20th order	0.001 … 1 A 0.1 %	± (2 % + 0.5 A) ± (2 % + 10 Digit)
21 … 30th order	0.001 … 1 A 0.1 %	± (2 % + 0.5 A) ± (2 % + 10 Digit)
21 … 50th order	0.001 … 1 A 0.1 %	not specified
General specifications
Display	3.7 in / 94.0 mm point-matrix LCD (320 * 240 pixel) with LED background lights
Safety standards	IEC1010CAT III 600V
Input resistance AC V	10 MOhm
Operating frequency of current clamp	40 Hz … 1 kHz
Tested operating frequency of current clamp	45 Hz … 65 Hz
Overload protection	AC V AC A	720 V RMS 1300 A with current clamp
Data Storage	SD memory card
Refresh interval	1 second
Data logging function	logging with real-time speed on SD memory card
Record interval	2 … 7200 seconds
Data output (only for live display on computer)	per USB or RS232, depending on connection cable
Operating temperature	0° C … +50° C / 32° F … 122° F
Surrounding humidity	< 80 % RH 8 x 1.5 V AA batteries
Voltage Supply	9 V adapter
Current Drain	Measurement Device: 300 mA DC current clamp: 34 mA DC
Maximum Wire Diameter	50 mm / 1.9 in
Weight	Measurement Device: 948 g / 33.4 oz (incl. battery) Current clamp: 467 g / 16.4 oz (incl. cable)
Dimensions	Device: 225 mm x 125 mm x 64 mm / 8.8 in x 4.9 in x 2.5 in Current clamp: 210 mm x 64 mm x 33 mm / 8.2 in x 2.5 in x 1.2 in Clamp jaw: 86 mm / 3.3 in (exterior)

The post Electrical Tester PCE-PA 8300 appeared first on Amet Co.,Ltd.

Electrical Tester PCE-PA 8000

Admin Amet — Wed, 10 Feb 2021 02:35:28 +0000

PCE-PA 8000 Electrical Tester
real time measurement with registration in the SD card / Integrated timer and calendar to record data / Active, apparent, and reactive power

The PCE-PA 8000 Electrical Tester is able to measure and record the power in both single-phase or three-phase circuits. With the PCE-PA 8000 Electrical Tester you will be able to perform prolonged measurements. Measurement values are saved in xls format on the included SD card of our Electrical Tester to be easily analyzed on the computer. Measurement sample rate can be set from 2 to 7200 seconds. The PCE-PA 8000 Electrical Tester can also measure power and determine both power factor and phase angle. The clamps of the PCE-PA 8000 Electrical Tester can be used for cables with a diameter of 50 mm / 2.0 in. The PCE-PA 8000 is the ideal tool to be used in power supply networks. Its 3.7 in / 94 mm display allows you to read all measured values for a quick analysis as well as providing a view of the current, voltage, and power.

– Analysis of a network of 3 phases / 4 conductors, 3 phases / 3 conductors, 1 phase / 2 conductors, 1 phase / 3 conductors
– Measures effective real value of current and voltage
– Measures active, apparent, and reactive power
– Power Factor (PF), phase angle (Φ)
– Measures voltage up to 600 V
– Measures current up to 1200 A
– It meets the IEC 1010 and CAT III 600 V standards
– Integrated timer and calendar to record data
– Measured values are recorded in the included SD card
– Data is stored in Excel format for further study
– Data can be transferred to a PC through data cable
– Large 3.7 in / 94 mm LCD display

Technical Specifications
Voltage (AC V)
Measurement range	Resolution	Accuracy
10 V … 600 V (phase to neutral)	0.1 V	±(0.5 % + 0.5 V)
10 V … 600 V (phase to neutral)
Current (AC A)
Measurement range	Resolution	Accuracy
20 A	0.001 A (< 10 A) 0.01 A (≥ 10 A)	±(0.5 % + 0.1 V)
200 A	0.01 A (< 100 A) 0.1 A (≥ 100 A)	±(0.5 % + 0.5 A)
1200 A	0.1 A (< 1000 A) 1 A (≥ 1000 A)	±(0.5 A + 5 A)
Active power
Measurement range	Resolution	Accuracy
0 KW … 9.999 KW	0.001 KW	±(1 % + 0.008 KW)
10 KW … 99.99 KW	0.01 KW	±(1 % + 0.008 KW)
100 KW … 999.9 KW	0.1 KW	±(1 % + 0.8 KW)
1 MW … 9.999 MW	0.001 MW	±(1 % + 0.008 MW)
Apparent power
Measurement range	Resolution	Accuracy
0 KVA … 9.999 KVA	0.001 KVA	±(1 % + 0.008 KVA)
10 KVA … 99.99 KVA	0.01 KVA	±(1 % + 0.08 KVA)
100 KVA … 999.9 KVA	0.1 KVA	±(1 % + 0.8 KVA)
1 MVA … 9.999 MVA	0.001 MVA	±(1 % + 0.008 MVA)
Reactive power
Measurement range	Resolution	Accuracy
0 KVAR … 9.999 KVAR	0.001 KVAR	±(1 % + 0.008 KVAR)
10 KVAR … 99.99 KVAR	0.01 KVAR	±(1 % + 0.08 KVAR)
100 KVAR … 999.9 KVAR	0.1 KVAR	±(1 % + 0.8 KVAR)
1 MVAR … 9.999 MVAR	0.001 MVAR	±(1 % + 0.008 MVAR)
Active energy
Measurement range	Resolution	Accuracy
0 KWh … 9.999 KWh	0.001 KWh	±(1 % + 0.008 KWh)
10 KWh … 99.99 KWh	0.01 KWh	±(1 % + 0.08 KWh)
100 KWh … 999.9 KWh	0.1 KWh	±(1 % + 0.8 KWh)
1 MWh… 9.999 MWh	0.001 MWh	±(1 % + 0.008 MWh)
Apparent energy
Measurement range	Resolution	Accuracy
0 KVAh … 9.999 KVAh	0.001 KVAh	±(2 % + 0.008 KVAh)
10 KVAh … 99.99 KVAh	0.01 KVAh	±(2 % + 0.08 KVAh)
100 KVAh … 999.9 KVAh	0.1 KVAh	±(2 % + 0.8 KVAh)
1 MVAh… 9.999 MVAh	0.001 MVAh	±(2 % + 0.008 MVAh)
Reactive energy
Measurement range	Resolution	Accuracy
0 KVARh … 9.999 KVARh	0.001 KVARh	±(2 % + 0.008 KVARh)
10 KVARh … 99.99 KVARh	0.01 KVARh	±(2 % + 0.08 KVARh)
100 KVARh … 999.9 KVARh	0.1 KVARh	±(2 % + 0.8 KVARh)
1 MVARh… 9.999 MVARh	0.001 MVARh	±(2 % + 0.008 MVARh)
Power factor
Measurement range	Resolution	Accuracy
0 … 1	0.01	±0.04
Phase angle
Measurement range	Resolution	Accuracy
-180º … 180º	0.1º	±1º
Frequency
Measurement range	Resolution	Accuracy
45 Hz … 65 Hz	0.1 Hz	0.1 Hz
General specifications
Display	3.7 in / 94.0 mm LCD (320 x 240 pixels) with LED backlight
Electrical properties	AC V, AC A, active power, apparent power, power factor, phase angle, mains frequency
Voltage ranges	10 V … 600 V AC, automatic range selection
Security / Standards	IEC1010CAT III 600V
AC V input resistance	10 MΩ
Operation frequency of current clamps	40 Hz … 1 kHz
Tested operation frequency of current clamps	45 Hz … 65 Hz
Overload protection	AC V / 720 V rms
AC A	1300 A with current clips
Memory	SD card up to 16 GB
Measurement display rate	1 second
Data logger	SD
Measurement sample rate	2 seconds… 7200 seconds
Data output	USB or RS-232, depending on the connection cable
Operating temperature	0º C … 50º C / 32° F … 122° F
Operating humidity	< 80 % H.r.
Power	8 x 1.5 V AA batteries / mains component
Input current	Meter: 300 mA DC Clamp: 34 mA DC
Max. diameter	50 mm / 1.9 in
Weight	Meter: 948 g / 33.4 oz (with batteries) Clip: 467 g / 16.4 oz (with cable)
Dimensions	Meter: 225 mm x 125 mm x 64 mm / 8.8 in x 4.9 in x 2.5 in
	Clamp: 210 mm x 64 mm x 33 mm / 8.2 in x 2.5 in x 1.2 in
	Jaw: 86 mm / 3.3 in (exterior)

The post Electrical Tester PCE-PA 8000 appeared first on Amet Co.,Ltd.

Electrical Tester PCE-GPA 50-ICA incl. ISO Calibration Certificate

Admin Amet — Wed, 10 Feb 2021 02:30:03 +0000

Electrical Tester PCE-GPA 50-ICA incl. ISO Calibration Certificate
Current clamp up to 2000 A / TRMS measurement / Power measurement / Harmonic analysis / Graphic display with lighting / Data storage / Mains and battery operation

The PCE-GPA 50 current clamp is used to measure the current of 1- or 3-phase loads. This clamp is especially characterized by its measuring range up to 2000 A. Another highlight is the graphic display of the current clamp. Here, in addition to the numerical measured values, the waveform of the phase can also be displayed by the current clamp. Likewise, the current clamp can be used to measure voltages. As a result, the current clamp is able to calculate effective, apparent and reactive power with the help of the phase angle. In addition, the current clamp can measure other network parameters such as the energy, power factor and harmonic.

In addition to the extensive measuring functions, this current clamp distinguishes your data logger function. All measured values can be stored by the current probe directly on a micro SD card. The clamp is powered by 2 1.5V AA batteries. However, it is also possible to operate the current clamp with a power supply for long-term measurements.

– Graphic display
– Data logger on Micro-SD card
– Measurement for 1 and 3 phases
– Temperature measurement with thermocouple
– Voltage measurement 10V … 600V AC RMS
– Current measurement 5 … 2000 A AC RMS
– Current clamp opening 50 mm
– Harmonic distortion up to the 50th order
– incl. ISO Calibration Certificate

Type of measurement
AC voltage AC V	Measuring range	Resolution	Accuracy
	10 … 600V	0.1V	± (0.5% … 3 digits)
	Peak to peak	0.1V	± (5% … 30 digits)

AC AC A	5 … 2000 A	< 100 A: 0.01 A	< 200 A: ± (1% + 0.5 A)
		< 1000 A: 0.1 A	> 200 A: ± (1% + 5 A)
	Peak to peak	> 1000 A: 1 A	± (5% + 30 digits)

Power factor (PF)	0 … 1	0.001	± 0.04

Phase angle	-180° … 180°	0.1°	± 1° x PF

Frequency	45 … 65 Hz	0.1 Hz	± 0.2 Hz

Active, blind &	0 … 9,999 m	0.1 … 0.001 M	± (1.5% + 20 digits)
apparent power	(W / VA / VAR)	(W / VA / VAR)

Harmonic AC V	1 … 20th order	0.1V	± (2% + 5 digits)
	21 … 50 okay	0.1V	± (4% + 5 digits)

Harmonic AC A	1 … 20th order	< 100 A: 0.01 A	± (2% + 5 digits)
Alternating current		< 1000 A: 0.1 A
	21 … 50 okay	> 1000 A: 1 A	± (4% + 5 digits)

Harmonic AC V%	1 … 20th order	0.1%	± (2% + 10 digits)
	21 … 50 okay	0.1%	± (4% + 20 digits)

Absolute harmonic	0 … 20%	0.1%	± (2% + 5 digits)
distortion	20.1 … 100%	0.1%	± (6% + 10 digits)

Temperature type K	-100 … 199.9°C / -148 … 391.8°F	0.1°C / 0.18°F	± (1% + 1°C / 1.8°F)
thermocouple	200 … 1300°C / 392 … 2372°F	1°C / 1.8°F	± (1% + 2°C / 3.6°F)

Display	Graphic LCD
AC V input impedance	10 MOhm
Frequency range	40 Hz … 1 kHz
Current Probe
Calibrated frequency	45 … 65 Hz
Current Probe
Overload protection	AC V: 720V RMS
	AC A: 2100 A
Data storage	Micro SD card
Refresh rate	1 second
Display
Storage rate	2 … 7200s
Data storage
Storage format	XLS
Interface	Serial interface for live presentation to PC
	(SOFT-LUT-USB is required)
Power supply	2 x 1.5V AA battery
	9V / 800-mA power supply
Current consumption	60-mA DC
Clamp opening	50 mm
Operating conditions	0 … 50°C / 32 … 122°F, max. 80% rh
Weight	About 595 g / 1.3 lbs
Dimensions	280 x 106 x 47 mm / 11 x 4.2 x 1.9 in

The post Electrical Tester PCE-GPA 50-ICA incl. ISO Calibration Certificate appeared first on Amet Co.,Ltd.

Electrical Tester PCE-123-ICA incl. ISO Calibration Certificate

Admin Amet — Wed, 10 Feb 2021 02:20:04 +0000

Electrical tester PCE-123-ICA
Digital, electrical, current, voltage or process calibrator, tester or multimeter for simulation and measurement of standardized electrical signals / Control signals as well as frequencies and temperature / Incl. ISO Calibration Certificate

The PCE-123 is a network-independent multifunction calibrator used to test and calibrate a variety of parameters of controllers and measuring instruments. Offering a high level of accuracy for an affordable price, this easy-to-use calibrator provides electrical (mA, mV, V and frequency in Hz) and temperature (in °C or °F) output signals, making the calibrator useful in a wide range of applications.

The calibrator also has automatic step and ramp functions as well as the possibility to pre-select the output signal steps (0 … 100 %) by using the arrow keys and to directly specify an output value (e. g. 13.8 mA). Operation via the keypad is very easy and intuitive. The PCE-123 multifunctional calibrator is an important tool in any electronics workshop as well as in any measuring and control department in trade, industry and automation.

– 4 to 20mA (1kΩ, 24V power)
– 0 to 100.00 mV / 0 to 1,0000V / 0 to 12,000V
– Type-K, J, E, T temperature thermocouple sensors (°C or °F)
– Frequency range 1 to 62,500Hz
– Basic accuracy 0.025 %
– Easy operation via keypad
– Automatic ramp function
– Selectable between 0 to 20mA/ 0 to 24mA
– Input 0 to 100% (mA, mV, V )
– Alarm beep ‘open’ (mA) or ‘short circuit’ (mV, V)
– Incl. ISO Calibration Certificate

mA DC current (maximum load at 1kΩ, powered by 24V)
Range	4 to 20-mA / 0 to 20-mA / 0 to 24-mA
Resolution	1µA
Accuracy	±0.025% ±3µA
Alert	Beeps when there is a short circuit or ouput current >1mA .
mV current, V DC (power 1-mA)
Ranges	0 to 100.00 mV 0 to 10.000 V 0 to 1.0000 V
Resolution	10 µV 1 mV 1.0000 V
Accuracy	± 0.05% ±30 µV ± 0.05% ±3 mV ± 0.05% ±300 µV
Alert	Beeps when there is a short circuit or ouput current >10mV.
Temperature sensor thermocouple type-K, J, E, T (1 kΩ min.)
Ranges	K: -200 … 0°C / -328 … 32°F and 0 … 1370°C / 32 … 2498°F J: -100 … 0°C / -148 … 32°F and 0 … 760°C / 32 … 1400°F E: -10 … 0°C / 14 … 32°F and 0 … 700°C / 32 … 1292°F T: -200 … 0°C / -328 … 32°F and T: 0 … 400°C / 32 … 752°F
Resolution	1°C / 1.8°F (across entire range)
Accuracy	K: ± 1.1°C / 2°F and ± 0.8°C / 1.4°F J: ± 0.9°C / 1.6°F and ± 0.7°C / 1.3°F E: ± 0.9°C / 1.6°F and ± 0.7°C / 1.3°F T: ± 1.0°C / 1.8°F and ± 0.8°C / 1.4°F
Frequency
Range	1 to 125Hz and 126 to 62.5kHz
Resolution	1 to 125Hz / 1Hz 126 to 62.5kHz / 604 readings
Accuracy	±0.04Hz
Selection	604 frequencies
General characteristics
Display	5 position LCD
Operating conditions	0 … 50°C / 32 … 122°F, <85% r.h.
Storage conditions	-20 … 60°C / -4 … 140 °F; <85% r.h.
Power	1 9V battery or 6 x 1.5V batteries
Consumption	60-mA to 180-mA (depending on output)
Battery indicator	5.5V for 150-mA
Dimensions	88 x 168 x 26 mm / 3.4 x 6.6 x 1 in
Weight	330 g / 11.6 oz

The post Electrical Tester PCE-123-ICA incl. ISO Calibration Certificate appeared first on Amet Co.,Ltd.

Electrical Tester PCE-GPA 50

Admin Amet — Wed, 10 Feb 2021 02:14:32 +0000

Electrical tester PCE-GPA 50
Current clamp up to 2000 A / TRMS measurement / Power measurement / Harmonic analysis / Graphic display with lighting / Data storage / Mains and battery operation

Type of measurement
AC voltage AC V	Measuring range	Resolution	Accuracy
	10 … 600V	0.1V	± (0.5% … 3 digits)
	Peak to peak	0.1V	± (5% … 30 digits)

AC AC A	5 … 2000 A	< 100 A: 0.01 A	< 200 A: ± (1% + 0.5 A)
		< 1000 A: 0.1 A	> 200 A: ± (1% + 5 A)
	Peak to peak	> 1000 A: 1 A	± (5% + 30 digits)

Power factor (PF)	0 … 1	0.001	± 0.04

Phase angle	-180° … 180°	0.1°	± 1° x PF

Frequency	45 … 65 Hz	0.1 Hz	± 0.2 Hz

Active, blind &	0 … 9,999 m	0.1 … 0.001 M	± (1.5% + 20 digits)
apparent power	(W / VA / VAR)	(W / VA / VAR)

Harmonic AC V	1 … 20th order	0.1V	± (2% + 5 digits)
	21 … 50 okay	0.1V	± (4% + 5 digits)

Harmonic AC A	1 … 20th order	< 100 A: 0.01 A	± (2% + 5 digits)
Alternating current		< 1000 A: 0.1 A
	21 … 50 okay	> 1000 A: 1 A	± (4% + 5 digits)

Harmonic AC V%	1 … 20th order	0.1%	± (2% + 10 digits)
	21 … 50 okay	0.1%	± (4% + 20 digits)

Absolute harmonic	0 … 20%	0.1%	± (2% + 5 digits)
distortion	20.1 … 100%	0.1%	± (6% + 10 digits)

Temperature type K	-100 … 199.9°C / -148 … 391.8°F	0.1°C / 0.18°F	± (1% + 1°C / 1.8°F)
thermocouple	200 … 1300°C / 392 … 2372°F	1°C / 1.8°F	± (1% + 2°C / 3.6°F)

Display	Graphic LCD
AC V input impedance	10 MOhm
Frequency range	40 Hz … 1 kHz
Current Probe
Calibrated frequency	45 … 65 Hz
Current Probe
Overload protection	AC V: 720V RMS
	AC A: 2100 A
Data storage	Micro SD card
Refresh rate	1 second
Display
Storage rate	2 … 7200s
Data storage
Storage format	XLS
Interface	Serial interface for live presentation to PC
	(SOFT-LUT-USB is required)
Power supply	2 x 1.5V AA battery
	9V / 800-mA power supply
Current consumption	60-mA DC
Jaw Capacity	50 mm
Operating conditions	0 … 50°C / 32 … 122°F, max. 80% rh
Weight	About 595 g / 1.3 lbs
Dimensions	280 x 106 x 47 mm / 11 x 4.2 x 1.9 in

The post Electrical Tester PCE-GPA 50 appeared first on Amet Co.,Ltd.

Electrical Tester PCE-BDM 20-ICA Incl. ISO Calibration Certificate

Admin Amet — Wed, 10 Feb 2021 02:12:31 +0000

Electrical Tester PCE-BDM 20-ICA Incl. ISO Calibration Certificate

Digital multimeter for the stationary workplace / Various measurement functions / High measuring ranges / PASS / FAIL function for component testing / HOLD function / Connection of two thermocouples simultaneously / Software / USB interface

The digital multimeter is a multimeter for a stationary workplace. In addition to measuring current, voltage and resistance, the digital multimeter can also use two thermocouples to measure the temperature and also determine the conductivity. So the digital multimeter can perform a variety of different measurement tasks. A direct connection to a PC can be established via the USB interface on the back of the digital multimeter. The software from the digital multimeter can then be used to carry out live analyzes using graphics and tables.

Another special feature of the digital multimeter is the PASS / FAIL function. With this function, target ranges for the measured values can be set for each measuring function. Depending on the actual measured value, a “PASS” (passed) or a “FAIL” (failed) is then shown on the display by the digital multimeter. The digital multimeter is therefore used, for example, in quality control. With the help of the adjustable handle, the digital multimeter can be adjusted for ergonomic use by the operator. The handle of the digital multimeter can also be used to change the workplace. The housing of the digital multimeter has a rubberized edge protection, which prevents damage.

– Table multimeter with reinforced housing
– USB interface for PC connection
– PASS / FAIL function for quality control
– extensive measuring functions
– Relate the measured value
– Measured value with bar graph display
– Incl. ISO calibration certificate

AC voltage
Measuring range	Resolution	Accuracy
60 mV	0.001 mV	± (0.6% 60 digits) @ 45 Hz … 1 kHz
600 mV	0.01 mV	± (0.3% 30 digits) @ 45 Hz … 1 kHz
6V	0.0001V	± (0.3% 30 digits) @ 45 Hz … 1 kHz
60V	0.001V	± (0.3% 30 digits) @ 45 Hz … 1 kHz
600V	0.01V	± (0.4% 30 digits) @ 45 Hz … 1 kHz
1000V	0.1V	± (0.6% 30 digits) @ 45 Hz … 1 kHz
Input impedance:> 10MΩ
Surge protection: 1000V
Display: True RMS in the measuring range of 10 … 100% of the respective measuring range

DC voltage
Measuring range	Resolution	Accuracy
60 mV	0.001 mV	± (0.025% + 20 digits)
600 mV	0.01 mV	± (0.025% + 5 digits)
6V	0.0001V	± (0.025% + 5 digits)
60V	0.001V	± (0.025% + 5 digits)
600V	0.01V	± (0.003% + 5 digits)
1000V	0.1V	± (0.003% + 5 digits)
Input impedance:> 10MΩ
Surge protection: 1000V

AC voltage + DC voltage
Measuring range	Resolution	Accuracy
60 mV	0.001 mV	± (1% + 80 digits) @ 50 Hz … 1 kHz
600 mV	0.01 mV	± (1% + 80 digits) @ 50 Hz … 1 kHz
6V	0.0001V	± (1% + 80 digits) @ 50 Hz … 1 kHz
60V	0.001V	± (1% + 80 digits) @ 50 Hz … 1 kHz
600V	0.01V	± (1% + 80 digits) @ 50 Hz … 1 kHz
1000V	0.1V	± (1.2% + 80 digits) @ 50 Hz … 1 kHz
Input impedance:> 10MΩ
Surge protection: 1000V
Display: True RMS in the measuring range of 10 … 100% of the respective measuring range

Alternating current
Measuring range	Resolution	Accuracy
600 µA	0.01 µA	± (0.6% + 40 digits) @ 45 Hz … 1 kHz
6000 µA	0.1 µA	± (0.6% + 20 digits) @ 45 Hz … 1 kHz
60-mA	0.001-mA	± (0.6% + 40 digits) @ 45 Hz … 1 kHz
600-mA	0.01-mA	± (0.6% + 20 digits) @ 45 Hz … 1 kHz
10 A	0.001 A	± (1% + 20 digits) @ 45 Hz … 1 kHz
Display: True RMS in the measuring range of 10 … 100% of the respective measuring range
Overload protection: µA and mA Measurement: Fuse F 0.6 A 1000V Ø6 x 32 mm
10 A measurement: F 11 A 1000V Ø 10 x 38 mm
When measuring almost 20 A, the measurement time should not be longer than 30 seconds.
After the measurement, the measuring device must rest for approx. 10 minutes.

Direct current
Measuring range	Resolution	Accuracy
600 µA	0.01 µA	± (0.8% + 20 digits)
6000 µA	0.1 µA	± (0.8% + 10 digits)
60-mA	0.001-mA	± (0.8% + 20 digits)
600-mA	0.01-mA	± (0.15% + 10 digits)
10 A	0.001 A	± (0.5% + 10 digits)
Overload protection: µA and mA Measurement: Fuse F 0.6 A 1000V Ø6 x 32 mm
10 A measurement: F 11 A 1000V Ø10 x 38 mm
A measurement of almost 20 A should not take longer than 30 seconds.
After the measurement, the measuring device must rest for approx. 10 minutes.

AC + DC
Measuring range	Resolution	Accuracy
600 µA	0.01 µA	± (0.8% + 40 digits) @ 50 Hz … 1 kHz
6000 µA	0.1 µA	± (0.8% + 20 digits) @ 50 Hz … 1 kHz
60-mA	0.001-mA	± (0.8% + 40 digits) @ 50 Hz … 1 kHz
600-mA	0.01-mA	± (0.8% + 20 digits) @ 50 Hz … 1 kHz
10 A	0.001 A	± (1.2% + 20 digits) @ 50 Hz … 1 kHz
Display: True RMS in the measuring range of 10 … 100% of the respective measuring range
Overload protection: µA and mA Measurement: Fuse F 0.6 A 1000V Ø6 x 32 mm
10 A measurement: F 11 A 1000V Ø10 x 38 mm
A measurement of almost 20 A should not take longer than 30 seconds.
After the measurement, the measuring device must rest for approx. 10 minutes.

Resistance
Measuring range	Resolution	Accuracy
600 Ω	0.01Ω	In REL mode: ± (0.05% + 10 digits)
6 kΩ	0.0001 kΩ	± (0.05% + 2 digits)
60 kΩ	0.001 kΩ	± (0.05% + 2 digits)
600 kΩ	0.01 kΩ	± (0.05% + 2 digits)
6 MΩ	0.0001 MΩ	± (0.3% + 10 digits)
60 MΩ	0.001 MΩ	± (2% +10 digits)
Surge protection: 1000 V
With a measuring range of 60 MΩ the ambient humidity should be < 50%.

Conductivity
Measuring range	Resolution	Accuracy
60 nS	0.01 nS	± (2% + 10 digits)
Surge protection: 1000V
The ambient humidity for the measuring range should be < 50%.

Capacity measurement
Measuring range	Resolution	Accuracy
6 nF	0.001 nF	± (3% + 10 digits)
60 nF	0.01 nF	± (2.5% + 5 digits)
600 nF	0.1 nF	± (2% + 5 digits)
6 μF	0.001 μF	± (2% + 5 digits)
60 μF	0.01 μF	± (2% + 5 digits)
600 μF	0.1 μF	± (2% + 5 digits)
6 mF	1 μF	± (5% + 5 digits)
60 mF	10 μF	for reference only
Surge protection: 1000 V

Temperature
Measuring range	Resolution	Accuracy
-40 … 40°C	1°C	± (2.0% + 30 digits)
40 … 400°C	1°C	± (1.0% + 30 digits)
100 … 1000°C	1°C	± 2.5%
-40 … 104°F	1.8°F	± (2.5% + 50 digits)
104 … 752°F	1.8°F	± (1.5% + 50 digits)
752 … 1832°F	1.8°F	± 2.5%
Surge protection: 1000V
Two-channel temperature measurement
Temperature sensor: Type K only applies to the measurement of temperatures below 230°C / 446°F

Frequency measurement
Measuring range	Resolution	Accuracy
60 Hz	0.001 Hz	± (0.02% + 8 digits)
600 Hz	0.01 Hz	± (0.01% + 5 digits)
6 kHz	0.0001 kHz	± (0.01% + 5 digits)
60 kHz	0.00 1kHz	± (0.01% + 5 digits)
600 kHz	0.01 kHz	± (0.01% + 5 digits)
6 MHz	0.0001 MHz	± (0.01% + 5 digits)
60 MHz	0.00 1MHz	± (0.01% + 5 digits)
Surge protection: 1000V
Input amplitude: 10 Hz … 30 MHz: 600 mV 30 MHz: not specified

Duty cycle
Measuring range	Resolution	Accuracy
10 … 90% @	0.01%	± (1.2% + 30 digits)
(10Hz … 2kHz)
Surge protection: 1000V
Rise time: <1 µs, the signal is centered on the trigger level

Pulse width
Measuring range	Resolution	Accuracy
250 mS	0.001 … 0.1 mS	± (1.2% + 30 digits)
Surge protection: 1000V
Rise time: < 1 µs, the signal is centered on the trigger level
10 Hz … 200 kHz: pulse width > 2 µs
The pulse range is limited by the frequency of the signal

Continuity test
Resolution	Functional description
0.01 Ω	Short circuit alarm: from < 10 Ω, alarm switches off from > 50 Ω
Surge protection: 1000V

Diode test
0.0001V	The open circuit voltage is approx. 3V and the measurable voltage drop
	of the PN transition is < 3V A continuous beep
	indicates the short circuit of the PN junction. The typical tension
	of the silicon PN junction is between 0.5 … 0.8V.
Surge protection: 1000V

Further specifications on accuracy can be found in the operating instructions

Further specification
Interface	USB interface
Supply voltage	100 … 240V adjustable
Environmental conditions	23°C / 73.4°F ± 5°C / 41°F, < 75% RH
Dimensions	310 x 240 x 120 mm / 12.2 x 9.4 x 4.7 in
Weight	Approx. 3713 g / 8.2 lbs

The post Electrical Tester PCE-BDM 20-ICA Incl. ISO Calibration Certificate appeared first on Amet Co.,Ltd.

Electrical Tester PCE-123

Admin Amet — Wed, 10 Feb 2021 02:10:06 +0000

Digital, electrical, current, voltage or process calibrator, tester or multimeter for simulation and measurement of standardized electrical signals / control signals as well as frequencies and temperature

Technical specifications
mA DC current (maximum load at 1kΩ, powered by 24V)
Range	4 to 20mA / 0 to 20mA / 0 to 24mA
Resolution	1µA
Accuracy	±0.025% ±3µA
Alert	beeps when there is a short circuit or ouput current >1mA .
mV current, V DC (power 1mA)
Ranges	0 to 100.00 mV 0 to 10.000 V 0 to 1.0000 V
Resolution	10 µV 1 mV 1.0000 V
Accuracy	± 0.05% ±30 µV ± 0.05% ±3 mV ± 0.05% ±300 µV
Alert	beeps when there is a short circuit or ouput current >10mV.
Temperature sensor thermocouple type-K, J, E, T (1 kΩ min.)
Ranges	K: -200 … 0 °C / -328 … 32 °F and 0 … 1370 °C / 32 … 2498 °F J: -100 … 0 °C / -148 … 32 °F and 0 … 760 °C / 32 … 1400 °F E: -10 … 0 °C / 14 … 32 °F and 0 … 700°C / 32 … 1292 °F T: -200 … 0°C / -328 … 32 °F and T: 0 … 400 °C / 32 … 752 °F
Resolution	1°C (across entire range)
Accuracy	K: ±1.1°C and ±0.8°C J: ±0.9°C and ±0.7°C E: ±0.9°C and ±0.7°C T: ±1.0°C and ±0.8°C
Frequency
Range	1 to 125Hz and 126 to 62.5kHz
Resolution	1 to 125Hz / 1Hz 126 to 62.5kHz / 604 readings
Accuracy	±0.04Hz
Selection	604 frequencies
General characteristics
Display	5 position LCD
Operating conditions	0 … 50 °C / 32 … 122 °F <85% r.h.
Storage conditions	-20 … 60 °C / -4 … 140 °F; <85% r.h.
Power	1 9V battery or 6 x 1.5V batteries
Consumption	60mA to 180mA (depending on output)
Battery indicator	5.5V for 150mA
Dimensions	88 x 168 x 26mm / 3.4 x 6.6 x 1 in
Weight	330 g / 11.6 oz

The post Electrical Tester PCE-123 appeared first on Amet Co.,Ltd.

Electrical Tester PCE-IT 120

Admin Amet — Wed, 10 Feb 2021 02:01:13 +0000

Electrical tester PCE-IT 120
“Auto Ranging” insulation tester up to 8 GΩ in a compact housing

The insulation measuring device PCE-IT 120 detects insulation resistance up to max. 8 GΩ (with auxiliary voltages of 250, 500 and 1000V). In addition, this insulation measuring device offers a measuring function for DC and AC voltages up to max. 950V DC and 700V AC as well as resistors up to max. 2 kΩ. A continuity tester with beep is integrated. Furthermore, the insulation meter can be used to check the polarization index and the dielectric ratio.

The measured values can be recorded at the touch of a button in the OLED display of the insulation tester. The device complies with DIN 57 411 part 1 / VDE 0411 part 1, protective measures for electronic measuring instruments (IEC1010-1) and DIN VDE 0413 (insulation tester). The insulation tester is always factory-calibrated and can be equipped with an ISO calibration certificate (at first order or at a recertification, eg annually).

Definition of the insulation resistance: The insulation resistance is the resistance in ohms for conductors, cables and electrical installations. It is therefore of great importance for the preventive protection of persons against electric shock or the avoidance of property damage by flowing leakage currents. Insulation resistance measurements are used to check and assess the condition of the insulation (conductor and housing).

– OLED display
– Automatic polarity display
– Automatic range selection
– Automatic zeroing
– Discharge beeper for insulation measurements
– Overload protection during continuity test
– Safety function, the voltage is held only 10 seconds (can be deactivated)
– Hold function
– PI and DAR test

Measuring ranges	2 GΩ / 250V
	4 GΩ / 500V
	8 GΩ / 1000V
	ACV: 0 … 950V
	DCV: 0 … 700V
Resistance / passage	0.01 … 1999 Ω

Resolution	Isolation: 1/10/100 MΩ
	ACV: 1V
	DCV: 1V
Resistance / passage	0.01 / 0.1 / 1 Ω

Accuracy	Isolation: ± 3%
	ACV: ± 1.5%
	DCV: ± 1.5%
Resistance / passage	± 2.0%

DC test voltage	250/500 / 1000V
Short circuit current	1.1-mA
Display	2-line 16-fold OLED display
Power supply	8 x 1.5V AA battery
Dimensions	175 x 85 x 75 mm / 6.9 x 3.3 x 3 in
Weight	About 655 g / 1.4 lbs
Environmental conditions	0 … 40°C / 32 … 104°F
Storage conditions	-10 … 50°C / 14 … 122°F
Degree of protection / standardization	IEC 1010-1, 700V CAT III

The post Electrical Tester PCE-IT 120 appeared first on Amet Co.,Ltd.

Electrical Tester PCE-BDM 20

Admin Amet — Wed, 10 Feb 2021 01:36:17 +0000

Electrical tester PCE-BDM 20
Digital multimeter for the stationary workplace / Various measurement functions / High measuring ranges / PASS / FAIL function for component testing / HOLD function / Connection of two thermocouples simultaneously / Software / USB interface

AC voltage
Measuring range	Resolution	Accuracy
60 mV	0.001 mV	± (0.6% 60 digits) @ 45 Hz … 1 kHz
600 mV	0.01 mV	± (0.3% 30 digits) @ 45 Hz … 1 kHz
6V	0.0001V	± (0.3% 30 digits) @ 45 Hz … 1 kHz
60V	0.001V	± (0.3% 30 digits) @ 45 Hz … 1 kHz
600V	0.01V	± (0.4% 30 digits) @ 45 Hz … 1 kHz
1000V	0.1V	± (0.6% 30 digits) @ 45 Hz … 1 kHz
Input impedance:> 10MΩ
Surge protection: 1000V
Display: True RMS in the measuring range of 10 … 100% of the respective measuring range

DC voltage
Measuring range	Resolution	Accuracy
60 mV	0.001 mV	± (0.025% + 20 digits)
600 mV	0.01 mV	± (0.025% + 5 digits)
6V	0.0001V	± (0.025% + 5 digits)
60V	0.001V	± (0.025% + 5 digits)
600V	0.01V	± (0.003% + 5 digits)
1000V	0.1V	± (0.003% + 5 digits)
Input impedance:> 10MΩ
Surge protection: 1000V

AC voltage + DC voltage
Measuring range	Resolution	Accuracy
60 mV	0.001 mV	± (1% + 80 digits) @ 50 Hz … 1 kHz
600 mV	0.01 mV	± (1% + 80 digits) @ 50 Hz … 1 kHz
6V	0.0001V	± (1% + 80 digits) @ 50 Hz … 1 kHz
60V	0.001V	± (1% + 80 digits) @ 50 Hz … 1 kHz
600V	0.01V	± (1% + 80 digits) @ 50 Hz … 1 kHz
1000V	0.1V	± (1.2% + 80 digits) @ 50 Hz … 1 kHz
Input impedance:> 10MΩ
Surge protection: 1000V
Display: True RMS in the measuring range of 10 … 100% of the respective measuring range

Alternating current
Measuring range	Resolution	Accuracy
600 µA	0.01 µA	± (0.6% + 40 digits) @ 45 Hz … 1 kHz
6000 µA	0.1 µA	± (0.6% + 20 digits) @ 45 Hz … 1 kHz
60-mA	0.001-mA	± (0.6% + 40 digits) @ 45 Hz … 1 kHz
600-mA	0.01-mA	± (0.6% + 20 digits) @ 45 Hz … 1 kHz
10 A	0.001 A	± (1% + 20 digits) @ 45 Hz … 1 kHz
Display: True RMS in the measuring range of 10 … 100% of the respective measuring range
Overload protection: µA and mA Measurement: Fuse F 0.6 A 1000V Ø6 x 32 mm
10 A measurement: F 11 A 1000V Ø 10 x 38 mm
When measuring almost 20 A, the measurement time should not be longer than 30 seconds.
After the measurement, the measuring device must rest for approx. 10 minutes.

Direct current
Measuring range	Resolution	Accuracy
600 µA	0.01 µA	± (0.8% + 20 digits)
6000 µA	0.1 µA	± (0.8% + 10 digits)
60-mA	0.001-mA	± (0.8% + 20 digits)
600-mA	0.01-mA	± (0.15% + 10 digits)
10 A	0.001 A	± (0.5% + 10 digits)
Overload protection: µA and mA Measurement: Fuse F 0.6 A 1000V Ø6 x 32 mm
10 A measurement: F 11 A 1000V Ø10 x 38 mm
A measurement of almost 20 A should not take longer than 30 seconds.
After the measurement, the measuring device must rest for approx. 10 minutes.

AC + DC
Measuring range	Resolution	Accuracy
600 µA	0.01 µA	± (0.8% + 40 digits) @ 50 Hz … 1 kHz
6000 µA	0.1 µA	± (0.8% + 20 digits) @ 50 Hz … 1 kHz
60-mA	0.001-mA	± (0.8% + 40 digits) @ 50 Hz … 1 kHz
600-mA	0.01-mA	± (0.8% + 20 digits) @ 50 Hz … 1 kHz
10 A	0.001 A	± (1.2% + 20 digits) @ 50 Hz … 1 kHz
Display: True RMS in the measuring range of 10 … 100% of the respective measuring range
Overload protection: µA and mA Measurement: Fuse F 0.6 A 1000V Ø6 x 32 mm
10 A measurement: F 11 A 1000V Ø10 x 38 mm
A measurement of almost 20 A should not take longer than 30 seconds.
After the measurement, the measuring device must rest for approx. 10 minutes.

Resistance
Measuring range	Resolution	Accuracy
600 Ω	0.01Ω	In REL mode: ± (0.05% + 10 digits)
6 kΩ	0.0001 kΩ	± (0.05% + 2 digits)
60 kΩ	0.001 kΩ	± (0.05% + 2 digits)
600 kΩ	0.01 kΩ	± (0.05% + 2 digits)
6 MΩ	0.0001 MΩ	± (0.3% + 10 digits)
60 MΩ	0.001 MΩ	± (2% +10 digits)
Surge protection: 1000 V
With a measuring range of 60 MΩ the ambient humidity should be < 50%.

Conductivity
Measuring range	Resolution	Accuracy
60 nS	0.01 nS	± (2% + 10 digits)
Surge protection: 1000V
The ambient humidity for the measuring range should be < 50%.

Capacity measurement
Measuring range	Resolution	Accuracy
6 nF	0.001 nF	± (3% + 10 digits)
60 nF	0.01 nF	± (2.5% + 5 digits)
600 nF	0.1 nF	± (2% + 5 digits)
6 μF	0.001 μF	± (2% + 5 digits)
60 μF	0.01 μF	± (2% + 5 digits)
600 μF	0.1 μF	± (2% + 5 digits)
6 mF	1 μF	± (5% + 5 digits)
60 mF	10 μF	for reference only
Surge protection: 1000 V

Temperature
Measuring range	Resolution	Accuracy
-40 … 40°C	1°C	± (2.0% + 30 digits)
40 … 400°C	1°C	± (1.0% + 30 digits)
100 … 1000°C	1°C	± 2.5%
-40 … 104°F	1.8°F	± (2.5% + 50 digits)
104 … 752°F	1.8°F	± (1.5% + 50 digits)
752 … 1832°F	1.8°F	± 2.5%
Surge protection: 1000V
Two-channel temperature measurement
Temperature sensor: Type K only applies to the measurement of temperatures below 230°C / 446°F

Frequency measurement
Measuring range	Resolution	Accuracy
60 Hz	0.001 Hz	± (0.02% + 8 digits)
600 Hz	0.01 Hz	± (0.01% + 5 digits)
6 kHz	0.0001 kHz	± (0.01% + 5 digits)
60 kHz	0.00 1kHz	± (0.01% + 5 digits)
600 kHz	0.01 kHz	± (0.01% + 5 digits)
6 MHz	0.0001 MHz	± (0.01% + 5 digits)
60 MHz	0.00 1MHz	± (0.01% + 5 digits)
Surge protection: 1000V
Input amplitude: 10 Hz … 30 MHz: 600 mV 30 MHz: not specified

Duty cycle
Measuring range	Resolution	Accuracy
10 … 90% @	0.01%	± (1.2% + 30 digits)
(10Hz … 2kHz)
Surge protection: 1000V
Rise time: <1 µs, the signal is centered on the trigger level

Pulse width
Measuring range	Resolution	Accuracy
250 mS	0.001 … 0.1 mS	± (1.2% + 30 digits)
Surge protection: 1000V
Rise time: < 1 µs, the signal is centered on the trigger level
10 Hz … 200 kHz: pulse width > 2 µs
The pulse range is limited by the frequency of the signal

Continuity test
Resolution	Functional description
0.01 Ω	Short circuit alarm: from < 10 Ω, alarm switches off from > 50 Ω
Surge protection: 1000V

Diode test
0.0001V	The open circuit voltage is approx. 3V and the measurable voltage drop
	of the PN transition is < 3V A continuous beep
	indicates the short circuit of the PN junction. The typical tension
	of the silicon PN junction is between 0.5 … 0.8V.
Surge protection: 1000V

Further specifications on accuracy can be found in the operating instructions

Further specification
Interface	USB interface
Supply voltage	100 … 240V adjustable
Environmental conditions	23°C / 73.4°F ± 5°C / 41°F, < 75% RH
Dimensions	310 x 240 x 120 mm / 12.2 x 9.4 x 4.7 in
Weight	Approx. 3713 g / 8.2 lbs

The post Electrical Tester PCE-BDM 20 appeared first on Amet Co.,Ltd.