Environmental Tester - Amet Co.,Ltd

Environmental Tester PCE-HT 420IoT

Admin Amet — Fri, 12 Feb 2021 04:22:11 +0000

Environmental Tester PCE-HT 420
Data logger for temperature and humidity / MQTT / Power supply unit or PoE (Power over Ethernet) / LC display / Visualization in web browser / 8 GB memory

The environmental tester PCE-HT 420 is used to monitor the temperature and humidity. The datalogger is equipped with a network interface. This makes the PCE-HT 420 data logger an ideal solution for objects in which the measurement data must be continuously recorded and monitored. The datalogger continuously stores the measured values on its internal memory. This is read out via browser or FTP client. The web browser also makes all the settings on the datalogger. No additional software is needed. The architecture of the data logger allows up to 10 users to dial in to the datalogger at the same time. Different access levels prevent unauthorized users from making settings to the datalogger.

In addition to storing the measured values, the PCE-HT 420 data logger can also alert the user to an alarm when the limit value is exceeded. Furthermore, various users can be notified of this alarm via email.

The data logger PCE-HT 420 measures and calculates the following climatic variables:

– Temperature
– Relative humidity

– Dew point

– Absolute humidity, ie amount of water vapor (in grams) per m³ of atmosphere at certain temperature

– Cooling limit temperature

– Saturated vapor pressure, ie pressure, at which gas at the specified temperature in equilibrium with liquid (equilibrium between evaporation and condensation)

– Enthalpy (energy content)

The data logger is supplied via an external power supply unit or via Power over Ethernet. The built-in FTP server provides quick and easy access to archive files using an Internet browser or from the interface of another FTP client. The DHCP protocol allows you to automatically configure the datalogger on the computer network. Furthermore, the data logger supports the Modbus TCP / IP protocol, so that the PCE-HT 420 can also be integrated in machines. All these features make the PCE-HT 420 Datalogger an important instrument wherever indoor climate needs to be monitored.

– Temperature and humidity sensor
– Ethernet interface with MQTT function
– LCD display
– Alarms via email
– Audible warning sound
– 8 GB memory

Measuring range humidity	0 … 95% rh (non-condensing)
Accuracy	± 3% between 10 … 90% ± 5% elsewhere
Hysteresis	± 1% RH
Measuring range temperature	-20 … 60°C / -4 … 140°F
Accuracy	± 0.6°C / 1.08°F in the range of 10 … 40°C / 10 … 104°F; ± 1.0°C / 1.8°F elsewhere
Calculated sizes	Absolute humidity g/m³ Dew point temperature °C / °F
Storage	Internal ring buffer: 4 MB* Internal hard disk 8 GB *The measurement data from the internal memory is automatically transferred to the permanent memory
Interface	Ethernet 10/100 Base / T
Number of connections	Max. 10 at the same time
Protocol	DHCP FTP SMTP Modbus TCP/IP MQTT
Power supply	DC power supply 6V / 1 A PoE IEEE 802.3af
Input	<2VA
Warm-up time	15 minutes
Operating conditions	-20 … 60°C / 95% rh
Degree of protection	IP20
Assembly	Rear mounting hole for wall mounting Sensor downwards
Weight	300 g / < 1 lb
Dimensions	120 x 80 x 25 mm / 4.7 x 3.1 x 1 in

The post Environmental Tester PCE-HT 420IoT appeared first on Amet Co.,Ltd.

Environmental Tester PCE-THB 40-ICA incl. ISO Calibration Certificate

Admin Amet — Fri, 12 Feb 2021 04:19:44 +0000

Environmental Tester with SD memory card & ISO Calibration Certificate
(max. 16 GB SDHC) / large LCD display / different units can be selected / battery or mains operation (optional) possible

The environmental tester records the air temperature as well as the relative humidity and the barometric pressure and saves them internally on an SD card. The compact device with a large memory (up to max. 16 GB SDHC card) is primarily used for long-term registration in the food sector (refrigerated counters in department stores, refrigerated transports, warehouses) and for measurement and recording in industry (heating and cooling processes, machine temperatures, product storage). The current measured value is shown directly on the LCD display and is also stored in the data memory so that the value can either be read off directly or the values stored on the SD card can be transferred to a PC or laptop as desired and evaluated graphically as a progression curve.

The values recorded in the data logger function can of course also be transferred back to the PC and evaluated (.xls file on the SD card). You can also check the columns of numbers for outliers and, in the case of the food industry, quickly see whether and, if so, how long the cold chain was interrupted. The internal real-time clock with date allows the user to precisely assign the events. The measuring rate is freely adjustable. The electronics of the data logger are protected against impacts and robust handling in industry.

– Measures temperature, humidity, barometric pressure
– Flexible internal real-time data storage via SD memory card (1 … 16GB)
– The saved data is saved directly as an Excel file on the SD card
– Selectable pressure unit: hPa, mmHg and inHg
– Low battery display
– Large LCD display
– Adjustable measuring rate
– Easy to use
– Robust housing
– Optional software kit for online transfer to a PC or laptop (no software is required to evaluate the stored data)
– incl. ISO Calibration Certificate

Measurement ranges
Temperature	0 … 50°C / 32 … 122°F
Relative humidity in air	10 … 90% RH
Barometric pressure	10 … 1100 hPa / 7.5 … 825 mmHg / 0.29 … 32.48 inHg
Resolution
Temperature	0.1°C / 0.18°F
Relative humidity in air	0.1% RH
Barometric pressure	0.1 hPa: 10 … 1000 hPa, 1 hPa: 1001 … 1100 hPa / 0.1 mmHg / 0.01 inHg
Accuracy
Temperature	± 0.8°C / ± 1.4°F
Relative humidity in air	± 4% RH: < 70% RH ± ( 4% reading + 1% RH): ≥ 70% RH
Barometric pressure	± 2 hPa: 10 … 1000 hPa, ± 3 hPa: 1001 … 1100 hPa / ± 1.5 mmHg / ± 0.1 inHg
Sampling interval	5,10, 30, 60, 120, 300 or 600 seconds, or automatic (it stores data when there is an alteration of the value of ± 1º, ±1 % RH or ± 1 hPa)
Memory	SD card memory up to 16 GB (an SD card is included in the delivery contents)
Operating temperature	0 … 50ºC / 32 … 122ºF < 90% RH
Power	6 x 1.5V AAA batteries or 1 x 9V electric power supply (optional)
Dimensions	132 mm x 80 mm x 32 mm / 5.1 in x 3.1 in x 1.3 in
Weight (with batteries)	285 g / < 1 lb

The post Environmental Tester PCE-THB 40-ICA incl. ISO Calibration Certificate appeared first on Amet Co.,Ltd.

Environmental Tester w/ Calibration Certificate PCE-HT110-ICA

Admin Amet — Fri, 12 Feb 2021 04:15:55 +0000

PCE-HT110-ICA Environmental Tester w/ ISO Calibration Certificate
2-channel data recorder with real-time LCD display and SD card memory

The PCE-HT110-ICA Environmental Tester or Humidity Detector precisely measures air temperature and relative humidity. This accurate and reliable device shows the current measurements on the large LCD display and saves the measurement data directly to an SD card (included). The PCE-HT110-ICA is equipped with two channels, accommodates an SD card memory of up to 16 GB, offers an adjustable measurement rate / sampling interval, and includes a wall mount, making the device ideal for logging data over an extended period of time.

The PCE-HT110-ICA Environmental Tester can be used to monitor climate-controlled environments such as supermarket refrigerators, refrigerated / reefer trucks and cold storage units. It is also useful for monitoring home HVAC systems, wood floor installations, cigar humidors, industrial heating and cooling processes, machine operating temperatures and product storage / warehouse conditions.

The PCE-HT110-ICA comes calibrated according to ISO standards. An ISO calibration certificate is included in the delivery contents.

Customer Review

“We use a humidity / temperature monitor from the PCE Group, Model PCE-HT110-ICA. It logs both temperature and humidity on an ongoing basis at regular intervals. The measurements are stored on an SD card which allows one to download the data to a spreadsheet for reference. Prior to receiving the unit, PCE sent it to a certified calibration service to ensure the unit was recording accurately. This has been very helpful to our work. A bonus is, by having the unit mounted on the job site, everyone is constantly reminded of the environmental conditions and can correct as necessary.”
— Jerry Wilson, Interior Architecture, Design and Certified General Contractor, Bespoke Design & Consulting, Juno Beach, Florida, USA

– Low battery indication
– Programmable date and time
– Impact-resistant electrical components
– Sturdy, dust- and water-resistant enclosure
– .XLS data format (compatible with Microsoft Excel)
– Battery powered (optional 9V AC adapter available)
– Optional USB data cable incl. software allows real-time data visualization via PC

Measurement ranges	0 … 50°C / 32 … 122°F, 10 … 90% r.H.
Accuracy	± 0.8°C / ± 1.4°F ± 4% r.H.
Resolution	0.1°C / 0.18°F, 0.1% r.H.
Memory	SD card 1 … 16 GB (2 GB SD card in delivery)
Measurement rate / sampling interval	Adjustable, 5, 10, 30, 60, 120, 300, or 600 seconds, or automatic (If the value changes by ± 1% r.H. Or ± 1°C / ± 1.8°F, the data record is automatically written to memory)
Date and time	Programmable
Power supply	6 x 1.5V batteries (AAA) / 9V power adapter (optional)
Operating conditions	0 … 50°C / 32 … 122°F, 0 … 90% r.H.
Dimensions	132 x 80 x 32 mm / 5.2 x 3.1 x 1.3 in
Weight	282 g / < 1 lb

The post Environmental Tester w/ Calibration Certificate PCE-HT110-ICA appeared first on Amet Co.,Ltd.

Environmental Electromagnetic Radiation Tester PCE-EM 30

Admin Amet — Fri, 12 Feb 2021 04:12:59 +0000

PCE-EM 30 Environmental Electromagnetic Radiation Tester
Triple-axis electromagnetic field (EMF) detector with data-logging functionality / Comes with two external sensor probes (for low and high frequency ranges)

PCE-EM 30 is a digital portable 3-axis environmental electromagnetic radiation tester or EMF detector used to measure electromagnetic radiation generated by electronic devices and electric installations. This triple-axis EMF meter provides greater precision than single-axis models as well as affords the ability to assess EMFs from more than one source at a time.

Note: USB data cable Incl. software VT-204-SW required for data transfer to PC – please see accessories tab for details.

– EMF measuring ranges: 0 to 199.99 V/m, 0 to 99.999 W/m², 0 to 9.9999 mW/cm²
– EMF bandwidth: 100 kHz to 3 GHz
– Measures EMF of 5G cellular Low-band and Mid-band
– Comes with two external sensor probes (for low and high frequency ranges)
– Features a large, easy-to-read LCD screen
– Adjustable alarm value
– Note: USB data cable Incl. software VT-204-SW required for data transfer to PC – please see accessories tab for details

Bandwidth / Frequency range of the probe EP-03H	100 MHz … 3 GHz
Range selection for the probe EP-03H	900 MHz, 1 GHz, 1.8 GHz, 2.4 GHz, 2.45 GHz, 3 GHz
Bandwidth / Frequency range of the probe EP-04L	100 kHz … 100 MHz
Range selection for the probe EP-04L	100 kHz, 200 kHz, 500 kHz, 1 MHz, 10 MHz, 13.56 MHz, 100 MHz
Accuracy	±2 dB
Measuring ranges	0 … 199.99 V/m 0 … 99.999 W/m² 0 … 9.9999 mW/cm²
Resolution	0.01 V/m 0.001 W/m² 0.0001 mW/cm²
Inital value	> 1 V/m > 0.03 W/m² > 0.0003 mW/cm²
External sensor probe types	Triple axis
Display	LCD, 58 x 34 mm / 2.28 x 1.34″
Limit value	Adjustable
Alarm	Acoustic signal when limit value is exceeded
Internal memory	16,000 data records
Power	9 V battery
Operating conditions	0 … 50 ºC / +32 … +122 ºF, up to 80 % relative humidity (RH)
Dimensions	Meter: 200 x 76.2 x 36.8 mm / 7.88 x 3.00 x 1.45″ Probes: 70 x 240 mm / 2.76 x 9.45″
Weight	523 g / 1.16 lb (with battery included)

The post Environmental Electromagnetic Radiation Tester PCE-EM 30 appeared first on Amet Co.,Ltd.

Environmental Tester PCE-DPM 3-ICA

Admin Amet — Fri, 12 Feb 2021 04:11:25 +0000

Environmental Tester PCE-DPM 3-ICA incl. ISO Calibration Certificate
Sintered cap to protect against moisture and dust / Data can be read out via any computer / Data memory for approx. 50,000 measurement data / CSV format / Battery can be recharged via micro-USB / Easy operation

The hygrometer is a mobile testing device for monitoring the quality of compressed air on stationary and mobile compressed air generators. This hygrometer measures the temperature, the relative humidity, H2O and calculates the current dew point up to an ambient pressure of 20 bar. Thanks to the sintered cap, the hygrometer in the pressure lines is protected from dirt, moisture and high flow speeds. This increases the service life of the hygrometer’s sensors.

The data memory of the hygrometer enables the course of the measurement parameters to be recorded in a pressure line. The data recorded by the hygrometer is permanently stored in the internal memory. The memory can be read out directly on the hygrometer. The hygrometer can also be connected to an operating system independent computer via the micro USB interface. This is made possible because the hygrometer is recognized as a mass data storage device. The data saved by the pressure dew point measuring device are saved in CSV format. The stored measurement data can thus be evaluated using any spreadsheet program.

– Data storage with CSV data export
– Dew point, H2O, temperature, humidity measurement
– For inline measurement of pressure pipes
– Battery operation for mobile use
– With G1 / 2 “connection thread
– Sensors protected with sintered filters
– incl. ISO Calibration Certificate

Measurement	Temperature
Measuring range	-10 … 60°C / 14 … 140°F
Resolution	0.01°C / 0.018°F
Accuracy at 20°C / 68°F	-10 … 50°C / 14 … 122°F: ± 0.3°C / 0.5°F

Measurement	Relative humidity
Measuring range	0 … 100%
Resolution	0.01%
Accuracy at 20°C / 68°F	< 5%:
	± (0.025% + 17.5% of mv)
	> 5%: ± (1% + 5% of mv)
	> 15%: ± (2% + 3% of mv)

Measurement	Dew point*
Measuring range	-50 … 30°C / -58 … 86°F
Resolution	0.01°C / 0.018°F
Accuracy	-40 … 20°C / -40 … 68°F: ± 2°C / 3.6°F
	-50 … -40°C / -58 … -40°F: ± 2.5°C / 4.5°F
*The accuracy of the dew point relates to an ambient temperature of 16 … 25°C / 61 … 77°F

Measurement	H2O
Measuring range	40 … 20,000 ppm
Resolution	1 ppm
Accuracy at 20°C / 68°F	± (7.3 ppm + 8.3%)

Environmental conditions	-10 … 60°C / 14 … 140°F
	0 … 20 bar (absolute)
Response time at: 0.2 m / s, 1 bar,	0 … 40°C / 32 … 104°F: 20s [120s]
20°C / 68°F, 63% RH [90%]	-40 … 0°C / -40 … 32°F: 10s [20s]

Data storage	For approx. 50,000 measuring points
Adjustable storage rates	10 seconds
	1, 5, 10, 20, minutes
Adjustable recording time	1, 5, 12, 24, 48 hours
File format	CSV
Cable length	Approx. 1.5 m / 4.9 ft
Thread	G1 / 2″
Thread length	1.2 cm
Probe length	5.2 cm
Probe width	1.2 cm
Display	2.3″ LCD
Power supply	Battery 3.7V DC, 3000-mAh
Power supply power pack
	Primary: 100 … 240V AC, 0.25 A
	Secondary: 5V DC, 1 A
Interface 7 mains connection	Micro USB
Weight	Approx. 610 g / 1.3 lbs

The post Environmental Tester PCE-DPM 3-ICA appeared first on Amet Co.,Ltd.

Environmental Tester PCE-DPM 3

Admin Amet — Fri, 12 Feb 2021 04:08:38 +0000

Environmental tester PCE-DPM 3
Sintered cap to protect against moisture and dust / Data can be read out via any computer / Data memory for approx. 50,000 measurement data / CSV format / Battery can be recharged via micro-USB / Easy operation

The environmental tester is a mobile testing device for monitoring the quality of compressed air on stationary and mobile compressed air generators. This environmental tester measures the temperature, the relative humidity, H2O and calculates the current dew point up to an ambient pressure of 20 bar. Thanks to the sintered cap, the environmental tester in the pressure lines is protected from dirt, moisture and high flow speeds. This increases the service life of the environmental tester’s sensors.

The data memory of the environmental tester enables the course of the measurement parameters to be recorded in a pressure line. The data recorded by the environmental tester is permanently stored in the internal memory. The memory can be read out directly on the environmental tester. The environmental tester can also be connected to an operating system independent computer via the micro USB interface. This is made possible because the environmental tester is recognized as a mass data storage device. The data saved by the pressure dew point measuring device are saved in CSV format. The stored measurement data can thus be evaluated using any spreadsheet program.

Measurement	Temperature
Measuring range	-10 … 60°C / 14 … 140°F
Resolution	0.01°C / 0.018°F
Accuracy at 20°C / 68°F	-10 … 50°C / 14 … 122°F: ± 0.3°C / 0.5°F

Measurement	Relative humidity
Measuring range	0 … 100%
Resolution	0.01%
Accuracy at 20°C / 68°F	< 5%:
	± (0.025% + 17.5% of mv)
	> 5%: ± (1% + 5% of mv)
	> 15%: ± (2% + 3% of mv)

Measurement	Dew point*
Measuring range	-50 … 30°C / -58 … 86°F
Resolution	0.01°C / 0.018°F
Accuracy	-40 … 20°C / -40 … 68°F: ± 2°C / 3.6°F
	-50 … -40°C / -58 … -40°F: ± 2.5°C / 4.5°F
*The accuracy of the dew point relates to an ambient temperature of 16 … 25°C / 61 … 77°F

Measurement	H2O
Measuring range	40 … 20,000 ppm
Resolution	1 ppm
Accuracy at 20°C / 68°F	± (7.3 ppm + 8.3%)

Environmental conditions	-10 … 60°C / 14 … 140°F
	0 … 20 bar (absolute)
Response time at: 0.2 m / s, 1 bar,	0 … 40°C / 32 … 104°F: 20s [120s]
20°C / 68°F, 63% RH [90%]	-40 … 0°C / -40 … 32°F: 10s [20s]

Data storage	For approx. 50,000 measuring points
Adjustable storage rates	10 seconds
	1, 5, 10, 20, minutes
Adjustable recording time	1, 5, 12, 24, 48 hours
File format	CSV
Cable length	Approx. 1.5 m / 4.9 ft
Thread	G1 / 2″
Thread length	1.2 cm
Probe length	5.2 cm
Probe width	1.2 cm
Display	2.3″ LCD
Power supply	Battery 3.7V DC, 3000-mAh
Power supply power pack
	Primary: 100 … 240V AC, 0.25 A
	Secondary: 5V DC, 1 A
Interface 7 mains connection	Micro USB
Weight	Approx. 610 g / 1.3 lbs

The post Environmental Tester PCE-DPM 3 appeared first on Amet Co.,Ltd.

Environmental Testing Device PCE-MPC 30

Admin Amet — Fri, 12 Feb 2021 04:06:00 +0000

Environmental Testing Device with data logger / HCHO measurement / battery for mobile use / 2.8 “TFT display / measurement of mass concentration / data storage on SD card

This Environmental Testing Device has many functions. With the Environmental Testing Device it is possible to determine the number of particles in the size of 0.3, 2.5 and 10 µm. In addition to measuring the particles, the Environmental Testing Device can also measure the PM 2.5 and PM 10 mass concentration. The mass concentration of the Environmental Testing Device determines the weight of the particles on one cubic meter.

In addition to particle measurement, the Environmental Testing Device can also determine the formaldehyde content in ppm. During this HCHO measurement, the temperature, the ambient humidity and the dew point are determined and displayed by the Environmental Testing Device. As a further important property, the Environmental Testing Device can also store data. It is therefore possible with the Environmental Testing Device to evaluate all measured values after a measurement.

– Particle counter, HCHO, temperature measurement

– Measured value recording for later analyzes

– Large 2.8 “LC display, 320 x 240 pixels

– Mass concentration PM 2.5 and PM 10

– Battery for mobile use

– Dew point and wet bulb temperature

Measurable particle sizes	PM 2.5 and PM 10
Measuring range	0 … 2000 µg / m³
Resolution	1 µg / m³

Particle counter
Measurable particle sizes	0.3, 2.5, 10 µm
Flow rate	2.83L / min (0.1 ft³)
Counting efficiency	50% at 0.3 µm;
	100% with particle size> 0.45 µm
Coincidence error	<5% at 2,000,000 particles per ft³
Data storage	5000 data records (micro SD card)
Counting modes	cumulative, differential, concentration

HCHO
Measuring range	0.01 … 5.00 ppm
Accuracy	± 5%
Resolution	0.01 ppm

Air temperature and relative humidity
Measuring range air temperature	0 … 50 ° C, 32 … 122 ° F
Measuring range dew point	0 … 50 ° C, 32 … 122 ° F
Relative humidity measuring range	0 … 100% RH
Air temperature measurement accuracy	10 … 40 ° C: ± 1 ° C, ± 1.8 ° F
	Others: ± 2 ° C, ± 3.6 ° F
Measuring accuracy dew point temperature	10 … 40 ° C: ± 1 ° C, ± 1.8 ° F
	Others: ± 2 ° C, ± 3.6 ° F
Relative humidity accuracy	0 … 20% rel. Humidity: ± 5%
	20 … 80% rel. Humidity: ± 3.5%
	80 … 100% rel. Fencing: ± 5%

More specifications
Operating conditions	0 … +50 ° C, 10 … 90% rel. humidity,
	not condensing
Storage conditions	-10 … +60 ° C, 10 … 90% rel. humidity,
	not condensing
Display	2.8 “, 320 x 240 pixels, backlit color LCD
Power supply mains adapter	Primary: 100 … 240 V AC, 50/60 Hz, 0.6 A.
	Secondary: 9 V DC, 1500 mA
Power supply battery	7.4 V, 1200 mAh, 8.88 Wh
Battery Life	approx. 4 hours in continuous operation
Battery recharge time	approx. 2 hours with AC adapter
Dimensions	240 x 75 x 57 mm
Weight	570 g

The post Environmental Testing Device PCE-MPC 30 appeared first on Amet Co.,Ltd.

Environmental Tester PCE-AQD 20-ICA Incl. ISO Calibration Certificate

Admin Amet — Fri, 12 Feb 2021 04:03:35 +0000

Environmental tester PCE-AQD 20-ICA incl. ISO calibration certificate

Air quality data logger for 5 parameters / Measures temperature, humidity, CO2, PM2.5 and air pressure / SD storage / XLS format / Large LCD / Power adapter and battery operation

The air quality data logger PCE-AQD 20 is an ideal measuring device for monitoring the air quality at workplaces. The air quality data logger is ideal for continuous logging of air temperature, humidity, CO2, PM2.5 and air pressure. All these parameters give the occupational safety expert information about the air quality. The measured values are stored by the CO2 air quality data logger on an SD memory card.

The format is XLS, so the measured values can be read directly into Excel, without having to be incorporated into a new software. The measured values are displayed on the large, illuminated display. The air quality data logger is operated by batteries or 9 V power supply unit. As a special feature, this air quality data logger is equipped with an alarm function. This offers the possibility to inform the user about an exceeding of temperature, air humidity or dust load. In addition to the measured values, the air quality data logger also informs about the current time.

– 5 measuring functions
– Excel data logger on SD card
– Large display
– Battery and power adapter operation
– Ideal for workplace monitorin

– Alarm functio

– Incl. ISO calibration certificate

Measurement function PM2.5
Measuring range	0 … 250 μm / m³
Resolution	1 μm / m³
Accuracy	± (10% of rdg. + 15 μm)

Measuring function humidity
Measuring range	5 … 95% rh
Resolution	0.1% RH
Accuracy	> 70% RH: ± (3% of the prev
	+ 1% RH)
	<70% RH: ± 3% RH

Measuring function temperature
Measuring range	0 … 50°C / 32 … 122°F
Resolution	0.1°C / 0.18°F
Accuracy	± 0.8°C / 1.44°F

Measurement function CO2
Measuring range	0 … 10,000 ppm
Resolution	1 ppm
Accuracy	< 1000 ppm: ± 40 ppm
	< 3000 ppm: ± (50 ppm + 3% of rdg.)
	> 3000 ppm: ± (50 ppm + 5% of rdg.)

Measuring function air pressure
Measuring range	10 … 1100 hPa
Resolution	0.1 hPa
Accuracy	± 1.5 hPa

Display	LCD display with backlight
Storage	SD card max. 32 GB
Storage rate	2 … 3,600 s
Memory error	< 0.1% of the completely stored data
Display	Hold, Max, Min
Measuring rate	About 1 s
Interface	Serial for live visualization on computers
	(Data cable SOFT-LUT-USB sold separately)
Alarm output	OC output 24V / 70-mA DC
Power supply	6 x 1.5V AA battery
	9V / 1 A power adapter
Current consumption	230-mA without lighting
	approx. 250-mA with lighting
Operating conditions	0 … 50°C / 32 … 122°F, max. 80% rh
Weight	About 387 g / < 1 lb
Dimensions	164 x 93 x 72 mm / 6.5 x 3.7 x 2.8 in

The post Environmental Tester PCE-AQD 20-ICA Incl. ISO Calibration Certificate appeared first on Amet Co.,Ltd.

Environmental Tester PCE-AQD 20

Admin Amet — Fri, 12 Feb 2021 03:52:58 +0000

Environmental tester PCE-AQD 20

Air quality data logger for 5 parameters / Measures temperature, humidity, CO2, PM2.5 and air pressure / SD storage / XLS format / Large LCD / Power adapter and battery operation

– 5 measuring functions
– Excel data logger on SD card
– Large display
– Battery and power adapter operation
– Ideal for workplace monitoring
– Alarm function

Measurement function PM2.5
Measuring range	0 … 250 μm / m³
Resolution	1 μm / m³
Accuracy	± (10% of rdg. + 15 μm)

Measuring function humidity
Measuring range	5 … 95% rh
Resolution	0.1% RH
Accuracy	> 70% RH: ± (3% of the prev
	+ 1% RH)
	<70% RH: ± 3% RH

Measuring function temperature
Measuring range	0 … 50°C / 32 … 122°F
Resolution	0.1°C / 0.18°F
Accuracy	± 0.8°C / 1.44°F

Measurement function CO2
Measuring range	0 … 10,000 ppm
Resolution	1 ppm
Accuracy	< 1000 ppm: ± 40 ppm
	< 3000 ppm: ± (50 ppm + 3% of rdg.)
	> 3000 ppm: ± (50 ppm + 5% of rdg.)

Measuring function air pressure
Measuring range	10 … 1100 hPa
Resolution	0.1 hPa
Accuracy	± 1.5 hPa

Display	LCD display with backlight
Storage	SD card max. 32 GB
Storage rate	2 … 3,600 s
Memory error	< 0.1% of the completely stored data
Display	Hold, Max, Min
Measuring rate	About 1 s
Interface	Serial for live visualization on computers
	(Data cable SOFT-LUT-USB sold separately)
Alarm output	OC output 24V / 70-mA DC
Power supply	6 x 1.5V AA battery
	9V / 1 A power adapter
Current consumption	230-mA without lighting
	approx. 250-mA with lighting
Operating conditions	0 … 50°C / 32 … 122°F, max. 80% rh
Weight	About 387 g / < 1 lb
Dimensions	164 x 93 x 72 mm / 6.5 x 3.7 x 2.8 in

The post Environmental Tester PCE-AQD 20 appeared first on Amet Co.,Ltd.

Environmental Electromagnetic Field Radiation Tester PCE-G28-ICA inc. ISO Cal.

Admin Amet — Fri, 12 Feb 2021 03:22:29 +0000

PCE-G28-ICA is a portable, handheld environmental electromagnetic field radiation tester that detects electromagnetic fields (EMFs) and displays measurement results in milliGauss (mG) or microTesla (µT). This EMF radiation detector comes with an external 3-axis electromagnetic sensor (X, Y, Z direction).

– Measurement range: 0 … 20000 mG / 0 … 2000 µT
– Accuracy: ± 4% + 3 digits / ± 5% + 3 digits / ± 10% + 5 digits
– Resolution: 0.1 mG / 0.01 µT
– Detects electromagnetic fields (EMFs) on three axes (X, Y, Z direction)
– Displays measurement results in milliGauss (mG) or microTesla (µT)
– Comes with an external 3-axis electromagnetic sensor
– Data hold functionality
– Ideal tool for checking transformers and measuring EMFs generated by power lines, computer monitors, electric motors and installations
– Meets IEC 801-1 (EN 50081-1) / IEC 204 (EN 60204) standards
– Measures EMFs through casings, coverings and housings, eliminating the need to dismantle parts for inspection
– incl. ISO Calibration Certificate

Technical specifications
Measurement range	microTesla: 0 to 20 µT / 0 to 200 µT / 0 to 2000 µT milliGauss: 0 to 200 mG / 0 to 2000 mG / 0 to 20000 mG
Resolution (per range)	0.01 µT / 0.1 µT / 1 µT 0.1 mG / 1 mG / 10 mG
Accuracy	±4 % + 3 digits (in range 20 µT and 200 mG)* ±5 % + 3 digits (in range 200 µT and 2000 mG)* ±10 % + 5 digits (in range 2000 µT and 20000 mG)* *Refers to 50 – 60 Hz y < 3 V/m (RF)
Sampling rate	Approx. 0.4 second
Frequency	30 … 300 Hz
Display	LCD, 3.5 digits
Power	1 x 9V battery
Dimensions	Meter: 200 x 68 x 30 mm / 7.88 x 2.68 x 1.18 in Sensor: 225 x 75 x 55 mm / 8.86 x 2.95 x 2.17 in
Weight	470 g / 1.04 lbs (including battery)

See user manual for complete technical specifications.

The post Environmental Electromagnetic Field Radiation Tester PCE-G28-ICA inc. ISO Cal. appeared first on Amet Co.,Ltd.