Flaw Detector - Amet Co.,Ltd

Flaw Detector PCE-USC 30

Admin Amet — Thu, 11 Feb 2021 02:18:17 +0000

PCE-USC 30 is a flaw detector designed for the non-destructive testing (NDT) and non-destructive evaluation (NDE) of electrically conductive materials. This portable, handheld flaw detector detects surface defects and measures layer thicknesses using an eddy current. The PCE-USC 30 flaw detector also measures metal conductivity in accordance with the International Annealed Copper Standard (IACS).

The PCE-USC 30 flaw detector has myriad applications including weld seam testing, crack detection, metallurgical and material sorting tests, quality assurance and control, aviation component testing of turbine blades, and pipeline and container testing in the chemical, oil and gas industries.
– Frequency range: 0.01 … 16000 kHz
– Visually depicts surface defects on screen
– 4.3″ full-color display (TFT)
– Ergonomic design
– Long battery life

Frequency range: 0.01 … 16000 kHz
Probe voltage supply: 0, 5, 1, 2, 4, 6 V
Signal phase shift: 0 … 360 °
Sampling frequency: 0 … 10 kHz
Duration of signal superimposition: 0 / 0.5 / 1/2/3/4 seconds
Alarm: Circular, horizontal line, circle sector, cut off
Display: Full-color display (TFT)
Display size: 4.3 “(diagonal)
Display resolution: 800 x 480 pixels
Amplification adjustment: 0 … 100 dB
Filters: Low-pass (1 … 4000 Hz), high-pass (1 … 4000 Hz), band, differential, average
Average interval between measurement errors: 4000 hours
Power supply: 12 V battery
Battery capacity: 4500 mAh
Continuous runtime per battery charge: Approx. 8 hours
Operating temperature: -20 … +45 ° C
Weight: Approx. 0.9 kg
Dimensions: 230 x 135 x 98 mm

The post Flaw Detector PCE-USC 30 appeared first on Amet Co.,Ltd.

Flaw Detector PCE-USC 20

Admin Amet — Thu, 11 Feb 2021 02:16:26 +0000

PCE-USC 20 is a portable or benchtop ultrasonic flaw detector or ultrasonic thickness gauge with a 5.7″ TFT color LCD screen. This ultrasound-based thickness meter uses one or two contact transducers (four different probes included; 90 °, 70 °, 60 °, 45 °) to measure material or wall thickness, detect flaws or defects in welds, and monitor the effects of corrosion on pipes and tanks.

PCE-USC 20 is an ultrasonic flaw detector used for non-destructive testing (NDT) and inspection in a wide variety of applications in industries such as chemical, oil and gas, metallurgical, manufacturing, quality control, metalworking, welding, machining, engineering, product research and development, construction, transportation and aerospace.
– Measurement range: 0.5 … 9999 mm (steel; longitudinal wave)
– Operating frequency range: 0.5 … 20 MHz
– Sound velocity: 1000 … 15000 m/s (continuously adjustable)
– AVG and DAC evaluation methods, display and probes delay, damping and reinforcing functions, export and reporting functions
– Saves up to 500 records to memory
– Lightweight design for ease of portability
– Complies with EN12668-1

Technical specifications
Measurement range	0.5 … 9999 mm (longitudinal shaft steel), continuously adjustable
Sound velocity	1000 … 15000 m/s, continuously adjustable, coarse adjustment
Display delay	-10 … 2000 mm
Probe delay	0.00 … 199.9 µs
Transmitting impulse	400 V negative signal peaks
Damping (impulse generator)	50 / 100 / 200 / 500
Work mode	One- or two-probe measurement
Operating frequency range	0.5 … 20 MHz
Pulse repetition frequency	40 / 250 /1000 Hz optional
Amplification / gain (receiver)	0 … 110 dB
Rectification (receiver)	Whole wave, positive half wave, negative half wave, high frequency representation
Alarm limits	Limit A (Gate A) and Limit B (Gate B), Adjustable as positive or negative peak with automatic (visual or audible) alarm
Measurement mode	Limit value / Extreme value mode
Measurement deviation horizontal linearity	≤0.1 %
Measurement deviation vertical linearity	≤3 %
Excess sensitivity	≥62 dB
Dynamic range	≥40 dB
Resolution remote field	≥30 dB
Sampling rate	400 MHz
Measurement data storage	500 records
Signal reproduction	Permanent recording of signals with the playback of dynamic echoes
Surface adjustment	Automatic adjustment of the error position of the angled probes
Automatic amplification	20 … 80 %, in 1 % steps
Menu language	English, Chinese
Interface	USB-A, USB-B, Ethernet
Display	5.7 ” TFT color LCD (640 x 480 pixels)
Operating temperature	-10 … +50 °C
Power supply	AC: 100 … 240 V DC: 15 V / 4 A
Battery	Li-ion battery (10.8 V, 5200 mAh)
Battery opearting time per charge	>6 hours
Protection class	IP54
Weight	1.4 kg (incl. battery)

The post Flaw Detector PCE-USC 20 appeared first on Amet Co.,Ltd.

Flaw Detector PCE-FD 20

Admin Amet — Thu, 11 Feb 2021 02:02:57 +0000

PCE-FD 20 is a portable ultrasonic flaw detector with a large LCD screen that displays A-scan maps of ultrasonic signals as well as B-scan cross sections. Ideal for use in mechanical engineering, aerospace and metallurgical applications, this high-frequency ultrasound-based defectoscope uses a contact transducer (two different probes included; 45° and 90°) to measure material thickness and identify flaws and defects such as discontinuity in welds.
– Operating frequency range: 1 … 10 MHz
– Measured time interval range: 6 … 1000 microseconds (µs)
– Sound velocity: 1000 … 9999 m/s
– Implements shadow, echo and mirror-shadow testing methods
– Features a USB interface for downloading data to PC for detailed analysis
– Lightweight
– Battery or electric power
– 1.5 m long probe cable

Technical specifications

Operating frequency range	1 … 10 MHz
Measure time interval range (scan duration)	6 … 1000 microseconds (µs)
Sound velocity range	1000 … 9999 m/s
Deviation of measurement of time intervals	Not exceed ± 0.025 µs
Max. deviation of amplitude of signals at receiver input in 0 … 110 dB range	Not exceed ± 0.5 dB
Testing gain region	125 dB
Averaging over the quantity of starts	1 … 16
Range of time-variable gain (TVG) / Number of control points TVG	40 dB / 15
Duration of excitation pulse to load	0 … 0.5 µs
Amplitude of excitation pulse to 50 Ohm load, not less	100, 200, 300
Operating frequency range of receiver at -3 dB	1 … 10 MHz
Deviation of amplitudes of input signals in 10 … 100% range of screen height	Not more than 1 dB
Scanning	1 … 1000 µs
Scanning delay	0 … 2000 µs
Measurement range of time intervals	0 … 1000 µs
Prism of probe delay	0 … 15 µs
Automatic signaling of defects (AFS)	Dual-gate
Setting range of AFS gates	0 … 2000 µs
Adjusting thresholds of AFS gates	0 … 100%
Detection of signals (receiver)	Positive half-wave, radio mode
Dimensions of device (approx.)	80 x 162 x 35 mm / 3.14 x 6.37 x 1.37″
Dimensions display (approx.)	48 x 74 mm / 1.88 x 2.91″
Power supply	100 … 250 V AC or 3 x 1.5 V AA batteries
Weight (approx.)	250 g / 0.55 lb (without batteries)

The post Flaw Detector PCE-FD 20 appeared first on Amet Co.,Ltd.