Flow Meter - Amet Co.,Ltd

FP111 Flow Probe

Alex — Wed, 19 Mar 2025 13:53:19 +0000

The FP111, FP211, and FP311 Flow Probes are highly accurate water velocity instruments for measuring flows in open channels and
partially filled pipes. The water velocity probe consists of a protected water turbo prop positive displacement sensor coupled with an expandable probe handle ending in a digital readout display. The water flow meter incorporates true velocity averaging for the most accurate flow measurements.

Flow Probe Specifications
Range 0.3 – 19.9 FPS (0.1 – 6.1 MPS)
Accuracy 0.1 FPS
Averaging True digital running average. Updated once per second.
Display LCD, Glare, and UV Protected
Control 4 button
Datalogger 30 sets, MIN, MAX, and AVG
Features Timer, Low battery warning
Sensor Type Protected Turbo-Prop propeller with magnetic pickup.
Weight
Instrument: 2 lbs (0.9 kg) (FP111); 3 lbs (1.4 kg) (FP211); 2.8 lbs (1.3 kg) (FP311)
Expandable Length 3.7 to 6 ft (1.1 to 1.8 m) (FP111);
Materials
Probe: PVC and anodized aluminum with stainless steel water bearing
Computer: ABS/Polycarbonate housing with polyester overlay
Power Internal Lithium Battery, Approx 5 years life with typical use, Non-Replaceable
Auto Shutoff After 5 minutes of inactivity
Operating Temperature -4 °F to 158 °F (-20 °C to 70 °C)
Storage Temperature -22 °F to 176 °F (-30 °C to 80 °C)
Carrying Case The Flow Probe is shipped in a padded carrying case.
Certificates CE

The post FP111 Flow Probe appeared first on Amet Co.,Ltd.

HIGH TEMPERATURE FLOW METER

Alex — Fri, 10 Mar 2023 10:10:32 +0000

Lake’s High Temperature Flow Meters enable flow monitoring of barrel heating fluids, thermal transfer fluids such as Syltherm® coolant flows, hydraulic circuits, and sub-circuits. Select from aluminum, brass, or stainless steel design for media compatibility requirements. High temperature flow meters are available for air, water, and oil flow measurement with maximum temperature of 600°F.

MEASURING ACCURACY:

±2.0% of full scale

REPEATABILITY:

±1% of full scale

FLOW MEASURING RANGE:

0.1-150 GPM (0.4-560 LPM)

MAXIMUM OPERATING PRESSURE:

Liquids
Aluminum and brass meters: 3500 PSIG (240 Bar)
Stainless steel meters: 6000 PSIG (410 Bar)
Air/Gas
Aluminum and brass meters: 600 PSIG (40 Bar)
Stainless steel meters: 1000 PSIG (69 Bar)

MAXIMUM OPERATING TEMPERATURE:

H-Series: 400°F (204°C)
J-Series: 600°F (315°C)

STANDARD CALIBRATION FLUIDS:

Oil meters: DTE 25® @ 110°F (43°C), 0.873 sg
Water meters: water @ 70°F (21°C), 1.0 sg
Air meters: air @ 70°F (21°C), 1.0 sg & 100 PSIG (6.8 bar)

FILTRATION REQUIREMENTS:

74 micron filter or 200 mesh screen minimum

MATERIALS OF CONSTRUCTION:

Window Tube: Pyrex®

Window Seals: PTFE

Casing & End Ports: Anodized Aluminum, Brass, or Stainless Steel

Seals:
H-Series (400°F) : FKM w/ PTFE backup
J-Series (600°F): FFKM w/ PTFE backup

Transfer Magnet: PTFE coated Alnico

All other internal parts: Stainless steel

The post HIGH TEMPERATURE FLOW METER appeared first on Amet Co.,Ltd.

PNEUMATIC VARIABLE AREA FLOW METER

Alex — Fri, 10 Mar 2023 10:01:57 +0000

Pneumatic Flow Meters are ideal for monitoring air compressor outputs, pneumatic tool air consumption, and industrial gas flows. The rugged and reliable design includes all metal pressure vessels, allowing safe installation in industrial systems and industries. Enjoy the unrestricted mounting capabilities and easy installation with multiple ports available.

MEASURING ACCURACY:

±2.5% of full scale in the center third of the measuring range; ±4% in upper and lower thirds

REPEATABILITY:

±1% of full scale

FLOW MEASURING RANGE:

2-1300 SCFM @ 100 PSIG (1-600 LPS)

MAXIMUM OPERATING PRESSURE:

Aluminum & Brass: 600 PSIG (40 Bar)
Stainless Steel: 1000 PSIG (69 Bar)

MAXIMUM OPERATING TEMPERATURE:

240°F (116°C) Note: For operation to 600°F (316°C), see our High Temp datasheet.

STANDARD CALIBRATION FLUIDS:

Air @ 70°F (21°C), 1.0 sg and 100 PSIG (6.8 Bar)

FILTRATION REQUIREMENTS:

74 micron filter or 200 mesh screen minimum

MATERIALS OF CONSTRUCTION (NON-WETTED COMPONENTS):

Window Tube: Polycarbonate
Window Seals: Buna-N®

MATERIALS OF CONSTRUCTION (WETTED COMPONENTS):

Casing & End Ports: Anodized Aluminum, Brass, or Stainless Steel
Seals:

Aluminum: Buna-N® (STD),EPR, FKM, or FFKM
Brass: Buna-N® (STD),EPR, FKM, or FFKM
Stainless Steel: FKM with PTFE backup (STD), Buna-N®, EPR or FFKM

Transfer Magnet: PTFE coated Alnico
All other internal parts: Stainless steel

The post PNEUMATIC VARIABLE AREA FLOW METER appeared first on Amet Co.,Ltd.

CLEARVIEW VALUE FLOW METER

Alex — Fri, 10 Mar 2023 09:04:19 +0000

The ClearView Value Flow Meter is used for water and hydraulic oil flow measurement. This flow meter is an economical way to monitor municipal pressure water flows, observe case drain flows, and verify pump outputs. The transparent body on this variable area flow meter allows for visual inspection of fluid conditions to diagnose any problems at a glance.

MEASURING ACCURACY:

±2.0% of full scale

REPEATABILITY:

±1% of full scale

FLOW MEASURING RANGE:

1-30 GPM (5-110 LPM)

MAXIMUM OPERATING PRESSURE:

325 PSIG (22.4 Bar)

MAXIMUM OPERATING TEMPERATURE:

ClearView H2O: 200°F (93°C) (for water)

ClearView+: 250°F (121°C)

STANDARD CALIBRATION FLUIDS:

Oil meters: DTE 25® @ 110°F (43°C), 0.873 sg

Water meters: tap water @ 70°F (21°C), 1.0 sg

FILTRATION REQUIREMENTS:

74 micron filter or 200 mesh screen minimum

MATERIALS OF CONSTRUCTION:

End Ports: Brass, Ryton®

Seals: Viton

Spring: Stainless Steel

Body: ClearView H2O – Polycarbonate, Clearview+ – Polysulfone

Indicator: Polysulfone

The post CLEARVIEW VALUE FLOW METER appeared first on Amet Co.,Ltd.

HYDRAULIC TEST ANALYZER

Alex — Fri, 10 Mar 2023 08:08:21 +0000

The Hydraulic Test Analyzer is used to diagnose faults in hydraulic circuits, determine horsepower, and test for component wear and cylinder leakage. Available in aluminum or stainless steel, this variable area flow meter offers complete troubleshooting and predictive maintenance so you can plan component repairs and strategized pump, valve, motor, and cylinder rebuilding. The compact and rugged design includes a complete hydraulic system test analyzer small enough to fit in a tool box. No batteries or electrical power are required to power this multi-measurement analyzer for simultaneous measurement of flow, pressure, and temperature.

MEASURING ACCURACY:

Flow: ±2% of full scale
Pressure: ±2.5% of full scale
Temperature: ±2.5% of full scale

REPEATABILITY:

±1% of full scale – all measurements

FLOW MEASURING RANGE:

Flow: 0.1–150 GPM (0.5-550 LPM)
Temperature: 0–250°F (-20–120°C)

MAXIMUM OPERATING PRESSURE:

Aluminum Meters: 3000 PSIG (200 Bar)
Stainless Steel Meters: 5000 PSIG (340 Bar)

MAXIMUM OPERATING TEMPERATURE:

240°F (116°C)

STANDARD CALIBRATION FLUID:

Oil meters: DTE 25® @ 110°F (43°C), 0.873 sg

FILTRATION REQUIREMENTS:

74 micron filter or 200 mesh screen minimum

VISCOSITY

Standard viscosities up to 110 cSt

The post HYDRAULIC TEST ANALYZER appeared first on Amet Co.,Ltd.

CASE DRAIN FLOW METER

Alex — Fri, 10 Mar 2023 07:50:03 +0000

The Case Drain Flow Meter is a Variable Area Flow Meter offering a low cost alternative for monitoring pump performance and identifying required maintenance without interrupting operation. This meter is available for oil or water flow measurement. The superior exterior design of this flow measurement solution is weather-tight for use in outdoor environments and in systems with wash-down requirements.

MEASURING ACCURACY

±5.0% of full scale

REPEATABILITY

±1% of full scale

FLOW MEASURING RANGE

0.1-30 GPM (0.5-115 LPM)

MAXIMUM OPERATING PRESSURE

1000 PSIG (69 Bar)

MAXIMUM OPERATING TEMPERATURE

240°F (116°C)

STANDARD CALIBRATION FLUIDS:

Oil meters: DTE 25® @ 110°F (43°C), 0.873 sg

Water meters: tap water @ 70°F (21°C), 1.0 sg

FILTRATION REQUIREMENTS

74 micron filter or 200 mesh screen minimum

MATERIALS OF CONSTRUCTION (NON-WETTED COMPONENTS):

Window Tube: Polycarbonate

Window Seals: Buna-N

MATERIALS OF CONSTRUCTION (NON-WETTED COMPONENTS):

Casing: Anodized Aluminum

End Ports: Non-Anodized Aluminum

Seals: Buna-N

Transfer Magnet: PTFE coated Alnico

All other internal parts: Stainless steel

The post CASE DRAIN FLOW METER appeared first on Amet Co.,Ltd.

BI-DIRECTIONAL VARIABLE AREA FLOW METER

Alex — Fri, 10 Mar 2023 04:46:55 +0000

The Bi-Directional Variable Area Flow Meter is a high performing oil and water meter available in aluminum, brass, or stainless steel to meet system requirements. It measures bi-directional flow of oils and water, such as in test kits and mobile hydraulic systems. The high pressure operation, multiple ports available, and unrestricted mounting make this flow meter versatile, customizable, and easy to install. The all metal pressure vessels provide a safe and reliable, performance.

MEASURING ACCURACY:

±2.0% of full scale

REPEATABILITY:

±1% of full scale

FLOW MEASURING RANGE:

0.5-100 GPM (2-375 LPM)

MAXIMUM OPERATING PRESSURE:

Aluminum and brass meters: 3500 PSIG (240 Bar), Stainless steel meters: 6000 PSIG (410 Bar)

MAXIMUM OPERATING TEMPERATURE:

240°F (116°C) Note: for operation to 600°F (316°C), see our High Temperature Data sheet.

STANDARD CALIBRATION FLUIDS:

Oil meters: DTE 25® @ 110°F (43°C), 0.873 sg
Water meters: tap water @ 70°F (21°C), 1.0 sg

FILTRATION REQUIREMENTS:

74 micron filter or 200 mesh screen minimum

MATERIALS OF CONSTRUCTION:

Window Tube: Polycarbonate

Window Seals: Buna-N, PTFE option

Casing & End Ports: Anodized Aluminum, Brass, or Stainless Steel

Seals: Buna-N, optional EPR, FKM, or FFKM

Transfer Magnet: PTFE coated Alnico

All other internal parts: Stainless steel

The post BI-DIRECTIONAL VARIABLE AREA FLOW METER appeared first on Amet Co.,Ltd.

Lake Monitors Variable Area Flow Monitors

Alex — Fri, 10 Mar 2023 02:45:56 +0000

The LAKE Basic Inline Variable Area flow meter is ideal for monitoring pump performance and oil or water flows through hydraulic circuits and cooling systems. Often referred to as “rotameters,” Lake’s Basic meters are a low cost alternative to other flow meter types and are available in numerous materials of construction, including aluminum, brass and stainless steel to meet system and media requirements. The superior design not only makes this flow meter weather-proof for outdoor environments and wash-downs, but also reliable offering maintenance-free performance.

Specification

MEASURING ACCURACY: ±2.0% of full scale

REPEATABILITY: ±1% of full scale

FLOW MEASURING RANGE: 0.1-150 GPM (0.5-550 LPM)

MAXIMUM OPERATING PRESSURE: Aluminum and brass meters: 3500 PSIG (240 Bar), Stainless steel meters: 6000 PSIG (410 Bar)

MAXIMUM OPERATING TEMPERATURE: 240°F (116°C) Note: for operation to 600°F (316°C), see our High Temperature Data sheet.

STANDARD CALIBRATION FLUIDS:
Oil meters: DTE 25® @ 110°F (43°C), 0.873 sg
Water meters: tap water @ 70°F (21°C), 1.0 sg

FILTRATION REQUIREMENTS: 74 micron filter or 200 mesh screen minimum

MATERIALS OF CONSTRUCTION:
Window Tube: Polycarbonate
Window Seals: Buna-N, PTFE option
Casing & End Ports: Anodized Aluminum, Brass, or Stainless Steel
Seals: Buna-N, optional EPR, FKM, or FFKM
Transfer Magnet: PTFE coated Alnico
All other internal parts: Stainless steel

The post Lake Monitors Variable Area Flow Monitors appeared first on Amet Co.,Ltd.

Ultrasonic Flow Meter PCE-TDS 100HSH+-ICA incl. Thermometer and ISO Cal. Certs.

Admin Amet — Fri, 12 Feb 2021 02:54:57 +0000

Ultrasonic flow meter PCE-TDS 100HSH+-ICA incl. Temperature data logger & ISO Calibration Certificates
according to the transit time difference method / For determining flow velocity and flow / Measurement method for liquids that are as homogeneous as possible

This is a portable handheld clamp-on ultrasonic flow meter used for non-invasive, unobstructed and highly accurate measurements of the flow velocity of liquids in metal, plastic and rubber pipes and tubes with a diameter of 20 … 108 mm / approx. 3/4 … 4″ and 57 … 720 mm / approx. 2 … 28″. Ideal for use in oil and gas, water and wastewater, chemical, food and beverage, pharmaceutical, metals and mining, pulp and paper, power and heating, ventilation, air conditioning and refrigeration (HVACR) industries, this ultrasonic flow meter features user-friendly velcro-strap clamps that allow for quick and easy repositioning of the electroacoustic transducers.

Measurable liquids include: acetate, acetone, alcohol, ammonia, aniline, benzene, butyrate, chloroform, ethanol, ethyl alcohol, ethyl ether, ethylene glycol, freon R 12, petrol, glycerin, glycol, isobutanol, isobutane, isopentane, kerosene, linseed oil, methanol, methyl alcohol, engine oil, diesel oil, olive oil, peanut oil, paraffin oil, pentane, petroleum, 1-propanol, coolant, lubricating oil, silicone oil, transformer oil, trichlorethylene, 1, 1, 1 – trichloroethane, turpentine, distilled water and sea water.

Calculation of flow velocity according to the transit-time principle follows the equation:

v = measured velocity
T1 = run time of the ultrasonic signal in the flow direction
T2 = run time of the ultrasonic signal against the flow direction
L = length of the ultrasonic wave
α = ultrasonic signal angle to the flow

The transit-time principle requires pipes to be full and have no bubbles and no particles.

Each meter is assembled and calibrated by PCE Instruments in Germany. Therefore, a factory calibration certificate is provided by PCE Germany in the delivery contents of the meter. The certificate includes one measuring point on two different pipes. The reference display of the in-house test stand used by PCE for calibration has a valid DAkkS calibration certificate. This ensures traceability to the Physikalisch-Technische Bundesanstal (PTB) German national standard. Please note that because the meter’s measured values depend upon the pipe geometry, material and coating; the medium type, temperature and speed; and the sensor type and measuring method, these parameters are listed on the supplied certificate for maximum traceability.
– ideal for retrofitting
– installation without process interruption
– easy assembly
– accurate and reliable
– no pressure loss
– maintenance-free, no moving parts
– wear-free
– portable devices for control measurements
– incl. ISO calibration certificates

Technical Data Ultrasonic Flow Meter PCE-TDS 100
Handheld measuring range	-32 … +32 m/s
Resolution	0.0001 m/s
Accuracy for DN ≥ 50 mm: for DN < 50 mm:	±1.5 % of measured value ±3.5 % of measured value
Reproducibility	±1.0 % of measured value
Media	All liquids with an impurity
	<5% and a flow >0.03 m³/h

Flow units	Cubic meter [m³]
	Liter [l]
	Gallon (USA) [gal]
	Imperial gallon (UK) [igl]
	Million USA gallon [mgl]
	Cubic foot [cf]
	Barrel (USA) [bal]
	Imperial barrel (UK) [ib]
	Oil barrel [ob]

Time settings	per day [/d]
	per hour [/h]
	per minute [/m]
	and per second [/s]

Data logger	1800 measurements
Interface	USB (for online measurement and reading of the internal memory)
Protection	IP 52
Power supply	3 x AA NiMH rechargeable battery / 2100 mAh
	(at full charge 12h running time) 100 … 240 V AC 50/60 Hz
Dimensions	214 x 104 x 40 mm / 8.4 x 4.1 x 1.5″
Weight	450 g / 15 oz
Sensor	nominal width DN 50 … 700, 57 … 720 mm / approx. 2 … 28″
Temperature of liquid	-30 … 160 °C / -22 … 320 °F
Dimensions	50 x 45 x 45 mm / 1.9 x 1.7 x 1.7″
Weight	260 g / 9oz

Technical data evaluation software
– Units of power W, kW, MW, J/h, kJ/h, MJ/h, Btu/h, kBtu/h, MBtu/h
– Units of energy J, kJ, MJ, Wh, kWh, MWh, Btu, kBtu, MBtu
– Graphical representation of flow, flow temperature,
return temperature, heat output and heat quantity
– Tabular representation of flow, flow temperature,
return temperature, heat output and heat quantity
– Mobile and stationary measurement mode
– Real-time data logger with unlimited runtime (only limited by PC memory capacity)
– Data export function
– User-guided software operation with step-by-step instructions for
device and software configuration

Technical Data Temperature Datalogger PCE-T 330
Measuring range thermocouple Type K	-200 … +1370 °C / -328 … 2498 °F
Resolution	0.01 °C
Accuracy*	±(0.3 % of rdg. +0.40) °C*

Measuring range thermocouple Type T	–200 … +400 °C / -328 … 752 °F
Resolution	00.01 °C
Accuracy*	±±(0.3 % of rdg. +0.40) °C*

Measuring range thermocouple Type J	–200 … +1200 °C / -328 … 2192 °F
Resolution	00.01 °C
Accuracy*	±±(0.3 % of rdg. +0.40) °C*

Measuring rate	2/s
Operating temperature	-10 … +50 °C / 14 … 122 °F
Storage temperature	-20 … +60 °C (without batteries) / -4 … 140 °F
Power supply	3 x AAA batteries / 1.2 V battery
Battery life	ca. 190 h
	(without backlight, battery capacity 1200 mAh,
	ambient temperature 25 °C)
Protection class	IP52 (with protective cover and connected sensor)
Norm/ certification	CE/EMC ROHS

The post Ultrasonic Flow Meter PCE-TDS 100HSH+-ICA incl. Thermometer and ISO Cal. Certs. appeared first on Amet Co.,Ltd.

Ultrasonic Flow Meter PCE-TDS 100HS+-ICA incl. Thermometer & ISO Cal. Certs.

Admin Amet — Fri, 12 Feb 2021 02:52:07 +0000

Ultrasonic Flow Meter PCE-TDS 100HS+-ICA incl. Thermometer & ISO Calibration Certificates
according to the transit time difference method / For determining flow velocity and flow / Measurement method for liquids that are as homogeneous as possible

This is a portable handheld clamp-on ultrasonic flow meter used for non-invasive, unobstructed and highly accurate measurements of the flow velocity of liquids in metal, plastic and rubber pipes and tubes with a diameter of 20 … 108 mm / approx. 3/4 … 4 in. Ideal for use in oil and gas, water and wastewater, chemical, food and beverage, pharmaceutical, metals and mining, pulp and paper, power and heating, ventilation, air conditioning and refrigeration (HVACR) industries, this ultrasonic flow meter features user-friendly velcro-strap clamps that allow for quick and easy repositioning of the electroacoustic transducers.

Calculation of flow velocity according to the transit-time principle follows the equation:

The transit-time principle requires pipes to be full and have no bubbles and no particles.

The post Ultrasonic Flow Meter PCE-TDS 100HS+-ICA incl. Thermometer & ISO Cal. Certs. appeared first on Amet Co.,Ltd.