The panel indicator PCE-N24Z is used to display AC parameters. The built-in display can measure and display AC current, AC voltage or frequencies. The possibility of freely scaling the input signal allows a very versatile use of this built-in display. The current measurement result is very easy to read thanks to the large 4-digit LED display. The optional 24 V sensor supply allows direct connection of 2-wire sensors or transmitters, which simplifies the use of this process display. The configuration is carried out using the freely available software LPCon. With the help of the programming adapter PCE-PD14, settings can be made or read out from the built-in display. The configurations created with the software can be saved and called up again.

The digital universal indicator is designed in such a way that the measured values ​​displayed can be read from a large distance. With a digit height of 60 mm or 100 mm, the reading distance for the digital universal indicator is 25 m or 50 m. The red LEDs of the digital universal indicator enable reading of the measured values ​​even in very bright surroundings. The housing of the digital universal indicator is made of metal and is splash-proof with IP65. Thus, the digital universal indicator can be used under harsh environmental conditions.

Many different variants are available as input signals for digital universal indicators. Among other things, the industry supports digital displays 4 … 20 mA and pulses. The digital universal indicator is configured directly via the keypad. Digital display output interfaces are optionally available for industry. This makes it possible to switch process signals and pulses via the digital universal indicator when a limit value is reached, for example.

The digital universal indicator can be aligned vertically for optimal alignment when mounted on the wall. In addition to wall mounting, the digital universal indicator can be mounted on a control cabinet. The insulation on the housing of the digital universal indicator ensures that no water can get into the control cabinet.

The digital universal indicator is designed in such a way that the measured values ​​displayed can be read from a large distance. With a digit height of 60 mm or 100 mm, the reading distance for the digital universal indicator is 25 m or 50 m. The red LEDs of the digital universal indicator enable reading of the measured values ​​even in very bright surroundings. The housing of the digital universal indicator is made of metal and is splash-proof with IP65. Thus, the digital universal indicator can be used under harsh environmental conditions.

Many different variants are available as input signals for digital universal indicators. Among other things, the industry supports digital displays 4 … 20 mA and pulses. The digital universal indicator is configured directly via the keypad. Digital display output interfaces are optionally available for industry. This makes it possible to switch process signals and pulses via the digital universal indicator when a limit value is reached, for example.

The digital universal indicator can be aligned vertically for optimal alignment when mounted on the wall. In addition to wall mounting, the digital universal indicator can be mounted on a control cabinet. The insulation on the housing of the digital universal indicator ensures that no water can get into the control cabinet.

The digital universal indicator is designed in such a way that the measured values ​​displayed can be read from a large distance. With a digit height of 60 mm or 100 mm, the reading distance for the digital universal indicator is 25 m or 50 m. The red LEDs of the digital universal indicator enable reading of the measured values ​​even in very bright surroundings. The housing of the digital universal indicator is made of metal and is splash-proof with IP65. Thus, the digital universal indicator can be used under harsh environmental conditions.

Many different variants are available as input signals for digital universal indicators. Among other things, the industry supports digital displays 4 … 20 mA and pulses. The digital universal indicator is configured directly via the keypad. Digital display output interfaces are optionally available for industry. This makes it possible to switch process signals and pulses via the digital universal indicator when a limit value is reached, for example.

The digital universal indicator can be aligned vertically for optimal alignment when mounted on the wall. In addition to wall mounting, the digital universal indicator can be mounted on a control cabinet. The insulation on the housing of the digital universal indicator ensures that no water can get into the control cabinet.

The digital universal indicator is designed in such a way that the measured values ​​displayed can be read from a large distance. With a digit height of 60 mm or 100 mm, the reading distance for the digital universal indicator is 25 m or 50 m. The red LEDs of the digital universal indicator enable reading of the measured values ​​even in very bright surroundings. The housing of the digital universal indicator is made of metal and is splash-proof with IP65. Thus, the digital universal indicator can be used under harsh environmental conditions.

Many different variants are available as input signals for digital universal indicators. Among other things, the industry supports digital displays 4 … 20 mA and pulses. The digital universal indicator is configured directly via the keypad. Digital display output interfaces are optionally available for industry. This makes it possible to switch process signals and pulses via the digital universal indicator when a limit value is reached, for example.

The digital universal indicator can be aligned vertically for optimal alignment when mounted on the wall. In addition to wall mounting, the digital universal indicator can be mounted on a control cabinet. The insulation on the housing of the digital universal indicator ensures that no water can get into the control cabinet.

The voltage indicator PCE-N30U can process several different input signals, such as 0…410/4010 Ohm, -10…+63 mV DC, -13…+13 V DC, -24…+24 mA DC or signals from thermocouples and resistance thermometers. This makes the voltage  indicator applicable in a wide range of applications. The measured values are shown on the large LED display of the PCE-N30U.

The display is three-coloured and can change its colour depending on the actual indicated value. This makes it easier to evaluate the values. It is also possible to program threshold values, which trigger a signal through the two alarm outputs. The input signal of the voltage indicator is freely scalable. The PCE-N30U is available with different measuring units, outputs and power supplies. You can select the particular parameters further below.

Input (selectable)	2-, 3-wire Pt100, Pt500, Pt1000 thermocouples type J, K, N, E, R, S resistance 0 … 410 Ohm / 4010 Ohm voltage -10 … +63 mV DC, -13 … +13 V DC current -24 … +24 mA DC
Sampling rate	1 per second
Resolution	16 bit
Internal resistance	voltage measurements: 1 MOhm current measurements: 12 Ohm
Scaling	21 points
Display	5-digits, 7-segments, LED, three-coloured
Display range	-19,999 … +99,999
Measuring unit	selectable from 56 different units
Outputs	2 closing relays 250 V / 0.5 A Sensor power supply: 24 V DC, max. 30 mA
Additional outputs (selectable)	2 changeover relays 250 V / 0.5 A RS485 interface analogue output (4 … 20 mA / 0 … 10 V) open collector pulse output
Environmental conditions	During operation: -25 °C … 55 °C / 25 … 95 % RH During storage: -33 °C … +70 °C / 25 … 95 % RH
Dimensions	96 x 48 x 93 mm
Panel cutout	92 x 45 mm (according to DIN standard)
Power supply (wählbar)	85 … 253 V AC/DC 20 … 40 V AC/DC
Protection class	Front: IP 65
Weight	< 200 g
Mounting	Mounting clips with screws, Connection via screw terminals (connection plan on the housing)
Housing	plastic

Input (selectable)	0 … 10 V 0 … 60 mV ± 10 V
Input impedance	1 MΩ
Accuracy	± (0.2 % FS + 1 digit)
Scale	2 points
Averaging time	0.5 … 20 s
Outputs	2 x open collector outputs, 30 V, 20 mA
Sensor power supply	24 V, 30 mA
Display	5-digit, 7-segment, three-color LED display, 14 mm (0.55″) high
Display range	-19999 … 99999
Ambient temp. range	During operation: -10 °C … +55 °C (+14 °F … +131 °F) During storage: -25 °C … +85 °C (-13 °F … +185 °F)
Max. humidity	95 % RH non-condensing
Dimensions	96 x 48 x 64 mm (Approx. 3.78 x 1.89 x 2.52″)
Panel installation	According to DIN standard: 92 x 45 mm (Approx. 3.62 x 1.77″)
Power supply (selectable)	85 … 253 V AC/DC 20 … 40 V AC/DC
Power consumption	< 6 VA
Ingress protection rating	Face: IP65
Weight	< 250 g (0.56 lb)
Mounting	Mounting clips with screws, connection via screw terminals (connection plan on the housing)
Housing	Solid plastic

The PCE-N20I voltage indicator is used for processing 4…20 mA and 0…20 mA signals. Many measuring transducers and sensors use this type of output, which makes the PCE-N20I suitable in a wide application area. The measurement results are shown on the large 5 -digit LED-display of the PCE-N20I. Depending on the actual values, the results can be shown in three different colours, which makes it easier to evaluate them. The PCE-N20I can also output signals via its two open collector outputs, when a threshold value is exceeded. This allows the usage of external alarm systems in combination with the PCE-N20I. The threshold values and other configuration settings can be set by using the free software LPCon and the optional PCE-PD 14 programming adapter. An integrated power supply system of 24 V allows the direct connection of sensors and transducers to the PCE-N20I. The PCE-N20I is available with different measuring units, inputs and power supplies. You can select the particular parameters further below.

Technical specifications
Input (selectable4)	4 … 20 mA 0 … 20 mA ± 20 mA
Input impedance	10 Ω ± 1 %
Accuracy	± (0,2 % FS + 1 dgt.)
Scale	2 points
Averaging time	0,5 … 20 s
Outputs	2x open collector outputs, 30 V, 20 mA
Sensor power supply	24 V, 30 mA
Display	5-digit 7-segment LED display, height: 14 mm, three-coloured
Display range	-19999 … 99999
Environmental temperature	During operation: -10 °C … 55 °C During Storage: -25 °C … +85 °C
max. humidity	95 % non-condensating
Dimensions	96 mm x 48 mm x 64 mm
Panel installation	92 mm x 45 mm (according to DIN standard)
Power supply (selectable)	85 … 253 V AC/DC 20 … 40 V AC/DC
Power consumption	< 6 VA
Protection class	Front: IP 65
Weight	< 250 g
Mounting	Mounting clips with screws, Connection via screw terminals (connection plan on the housing)
Housing	Solid plastic

The PCE-N24S voltage indicator is used for the signal processing of  4…20 mA. The PCE-N24S voltage indicator offers a wide field of application due to the fact that its signal can be freely scaled. The PCE-N24S voltage indicator has a 5-digit LED display to allow the user to directly read current measured values. The power supply of the optional sensor of 24 V enables a direct connection to two-thread sensors or transducers to simplify the use of the PCE-N24S voltage indicator. The three PCE-N24S voltage indicator models have different power supply. The PCE-N24S voltage indicator can be powered by 230 V, 85 … 253 V or 20 … 40 V. The setting is carried out by the license free LPCon software. By means of the PCE-PD14 programming adapter both settings can be performed and measured values can be read on the PCE-N24S voltage indicator. Settings can be recorded and recalled.

Technical specifications
Input	3.6 mA … 4 mA … 20 mA … 22 mA
Accuracy	± (0.2 % FS + 1 digits)
Internal impedance	10 Ω ± 1 %
Scale	2 points
Display	4 digits and 7 segments LED display, height: 20 mm
Range	-19,999 … 99,999
Sensor power supply (only PCE-N24S-2 and -3)	24 V DC, max. 30 mA
Environmental temperature	Operation: -10 … 55 ºC Storage: -25 … +85 ºC
Dimensions	96 x 48 x 64 mm
Dimensions for panel installation	92 x 45 mm (to meet the DIN standard)
Power voltage	230 V AC, 85 … 253 V AC/DC 20 … 40 V AC/DC
Protection	Front: IP 65
Weight	approx. 200 g
Mounting	mounting clips with screws, connection by means of a terminal strip.
Housing	solid plastic

The digital panel meter PCE-N24H is designed to measure and display direct current and DC voltages. The option of arbitrary scaling of the input signal allows multiple applications of the digital panel meter PCE-N24H. Due to a large 4-digit LED the measured values are always clearly readable at the digital panel meter PCE-N24H. By means of the programming adapter PCE-PD14 you can also configure the settings of the digital panel meter on a computer, or read out the measured data. The solid synthetic enclosure of the digital panel meter PCE-N24H provides a good protection even at locations with rough environmental conditions.

General Technical Specifications of the Voltage Indicator PCE-N24H
Input (arbitrary)	± 100 V DC ± 250 V DC ± 400 V DC 0 … 100 V DC 0 … 250 V DC ±1 A DC ± 5 A DC
Accuracy	± (0.2 % FS + 1 dgt.)
Internal resistance	10 Ω ± 1 %
Scaling	2-point-scaling
Display	4-digit, 7-segments, LED, digit height: 20 mm
Display range	-1999 … 9999
Power Source for Sensor (arbitrary)	24 V DC, max. 30 mA
Surrounding temperature	During Operation: -10 °C … +55 °C Storage: : -25 °C … +85 °C
Diameters	96 mm x 48 mm x 64 mm
Size of switch board	92 mm x 45 mm (according to DIN)
Power Source (arbitrary)	24 V AC 110 V AC 230 V AC 85 … 253 V AC/DC 20 … 40 V AC/DC
Power Consumption of sensor (arbitrary)	24 V / 30 mA
Protection Class	Front: IP 65
Weight	< 200 g
Assembly	Mounting clips with clamp screws, Connection via plug board
Enclosure	Solid synthetic enclosure