Force Indicator - Amet Co.,Ltd

Force Indicator PCE-N45F

Admin Amet — Fri, 07 May 2021 08:51:04 +0000

Force indicator PCE-N45F
Weighing indicator for load cells, force sensors and weighing platforms / 4 and 6 wire connection technology / OLED display / Analogue output / Digital input / Relay s

The weighing indicator PCE-N45F is used to realize individual weighing solutions. Load cells, force sensors, weighing platforms and other sensors that use strain gauges can be connected to the weighing indicator. This makes the weighing indicator a versatile measuring instrument for weight, force, torque, etc. The weighing indicator has a measuring input to which the sensors can be connected in 4 or 6-wire technology. The menu can be used to perform an exact calibration / adjustment from the weighing indicator.

The weighing indicator has many rear connections. Thus, the 4 NO relays and the potential-free digital input are connected here on the weighing indicator. The outputs can be used to trigger different processes. The digital input is used to tare the weighing indicator or to set the display to 0. In addition to these functions, the weighing indicator can be deleted via the interface. The analogue output is used to pass on the displayed value directly from the weighing indicator.

– OLED display
– Display for DMS
– mV / V input
– Relay output
– Potential-free digital input
– Interface and analog output

Signal Input Range	0 … 10 mV
Sensitivity in mV / V at 5V	2 mV / V
Minimal sensitivity	0.9 μV / D

Signal Input Range	0 … 15 mV
Sensitivity in mV / V at 5V	3 mV / V
Minimal sensitivity	0.9 μV / D

Supply voltage of the measuring cell	5V
Number of measuring cells	1 … 6x 350 Ohm measuring cell (s)
Display	OLED 128 x 64 pixels
Units	g, kg, t, kN, N, Nm
Measuring rate	200 Hz
Electrical connections	Screw
	1 … 1.5 mm²
Power supply	24V DC
Input	< 6W
Degree of protection	Front: IP65
Assembly	Panel cut
Size panel cutout	92 x 44 mm
Dimensions	110 x 62 x 119 mm / 4.3 x 1.3 x 4.7 in
Weight	About 440 g / < 1 lb
Operating conditions	-10 … 40°C / 14 … 104°F, max 95% rh

The post Force Indicator PCE-N45F appeared first on Amet Co.,Ltd.

Force Indicator PCE-N50F

Admin Amet — Fri, 07 May 2021 08:46:19 +0000

Force indicator PCE-N50F
Weighing terminal for load cells, force sensors, etc. / LCD display / Max. 1600 Hz sampling rate / Serial Modbus interface / Digital inputs / Outputs / Different units

The force indicator PCE-N50F is suitable for panel mounting. This force indicator can be used to show the weight, force or torque. The decisive factor here is the type of sensor that is connected to the force indicator. The calibration of the force indicator to the respective measuring cell is made via the menu with the aid of exact calibration weights. The force indicator is used for stationary and individual weighing solutions. Often the force indicator is used where the weight has to be determined continuously.

The display of the force indicator device is a graphic display, which shows not only the numerical measured value but also the course of the weighing process. The force indicator also displays the minimum and maximum weighing values. Using the keys, the force indicator can be tared or set to zero. In addition to the operation via the keys, the force indicator can be operated via the rear-side digital inputs. So external buttons can be connected, which tare the force display device etc.

– Up to 1600 Hz sampling rate
– LC display
– Minimum and maximum value determination
– Tare and zero function
– For load cells, force sensors, etc.
– Digital inputs and outputs

Signal Input Range	0 … 20 mV
Minimal sensitivity	0.1 μV / digit
Supply voltage of the measuring cell	5V / 100-mA
Number of measuring cells	1 … 8x 350 Ohm measuring cell (s)
Display	3.5 “LCD
Units	g, mN, mlb, Pa, kg, N, Ib, kPa, t, kN, klb, MPa
Measuring rate	6, 12, 25, 50, 100, 200, 400, 800, 1600 Hz
Electrical connections	Screw
	1 … 2.5 mm²
Power supply	220V AC / 50Hz
Input	< 10W
Degree of protection	Front: IP65
Assembly	Panel cut
Size panel cutout	152 x 76 mm / 6 x 3 in
Dimensions	166 x 88 x 146 mm / 6.5 x 3.5 x 5.7 in
Weight	About 1150 g / 2.5 lbs
Operating conditions	-10 … 40°C / 14 … 104°F, max 85% RH
Storage conditions	-20 … 50°C / -4 … 122°F, max 85% RH

The post Force Indicator PCE-N50F appeared first on Amet Co.,Ltd.

Force and Weight Indicator PCE-DPD-F2

Admin Amet — Fri, 07 May 2021 08:43:30 +0000

PCE-DPD-F2 Force and Weight Indicator
Mounting display for strain gauges with mV & V / Modular output cards / 6 digit LED display / 230V or 24V power supply

The built-in display is used to indicate the force and weight detected by force sensors and load cells with strain gauges. The output signal of the measuring cell is irrelevant because the DMS display makes it possible to display the correct weight in mV / V based on the set sensitivity. The DMS display shows the measured values on a 6-digit LED display. The measuring range could theoretically be between -199999 … 999999. Depending on the desired and adjusted scaling, a corresponding unit sticker can be applied to the installation indicator.

The DMS display can directly supply voltage to the connected measuring cell with strain gauges. The supply voltage can be selected between 5V and 10V. Depending on the voltage selected, up to 8 or 4 force or load cells can be connected to the DMS digital display. A special feature of this digital display for mV / V is the modular output concept. Different, changeable output cards are available depending on the application.

– Digital display for strain gauges
– mV / V input
– 3 different measuring speeds
– Modular output cards available
– 1/8 DIN panel mounting dimensions
– LED display

Technical specification for DMS display of the PCE-DPD-F2
Signal Input Range	Accuracy at 25°C	Sensitivity in mV / V at 5V	Sensitivity in mV / V at 10V
0 … 100 mV DC	± 0.05% of reading	20 mV / V	10 mV / V
0 … 30 mV DC	± 0.05% of reading	6 mV / V	3 mV / V
0 … 20 mV DC	± 0.05% of reading	4 mV / V	2 mV / V
0 … 15 mV DC	± 0.05% of reading	3 mV / V	1.5 mV / V
0 … 10 mV DC	± 0.05% of reading	2 mV / V	1 mV / V
0 … 5 mV DC	± 0.05% of reading	1 mV / V	0.5 mV / V
Maximum input voltage		30V in all measuring ranges
Supply voltage measuring cells		5V or 10V
Maximum current		140-mA
Maximum number of measuring cells (with 350 Ohm measuring cells otherwise max. 140-mA)		5V supply: 1 … 8 measuring cells 10V supply: 1 … 4 measuring cells
Display		6-digit 7-segment LED display
Units (available by user)		g, kg, t, pcs, mg, lb, N, kN
Colour		Red
Character height		14 mm
Display area		-199999 … 999999
Decimal		Adjustable after each displayed digit
Under and Over Range display		The display flashes
Measuring rate (adjustable) / response time		16 Hz / 63 ms 50 Hz / 20 ms 60 Hz / 17 ms
Refresh rate display		16 Hz
Electrical connections		Screw connections 1 … 2.5 mm²
Power supply		11 … 60V DC / 24/48V AC
Input		Max. 1 W without output cards Max. 4 W with output cards
Degree of protection		Front: IP65
Assembly		Panel cut
Size panel cutout		92 x 44 mm / 3.6 x 1.7 in
Dimensions		96 x 48 x 91 mm / 3.7 x 1.9 x 3.6 in
Weight		About 150 g / < 1 lb
Operating temperature		0 … 50°C / 32 … 122°F
Storage temperature		-20 … 70°C / -4 … 158°F
Heating time		About 15 minutes

The post Force and Weight Indicator PCE-DPD-F2 appeared first on Amet Co.,Ltd.

Force and Weight Indicator PCE-DPD-F1

Admin Amet — Fri, 07 May 2021 07:53:03 +0000

PCE-DPD-F Series Force and Weight Indicator
Force display for strain gauges with mV & V / modular output cards / 6 digit LED display / 230V or 24V power supply

– Digital display for strain gauges
– mV / V input
– 3 different measuring speeds
– Modular output cards available
– 1/8 DIN panel mounting dimensions
– LED display

Technical specification for DMS display of the PCE-DPD-F series
Signal Input Range	Accuracy at 25°C	Sensitivity in mV / V at 5V	Sensitivity in mV / V at 10V
0 … 100 mV DC	± 0.05% of reading	20 mV / V	10 mV / V
0 … 30 mV DC	± 0.05% of reading	6 mV / V	3 mV / V
0 … 20 mV DC	± 0.05% of reading	4 mV / V	2 mV / V
0 … 15 mV DC	± 0.05% of reading	3 mV / V	1.5 mV / V
0 … 10 mV DC	± 0.05% of reading	2 mV / V	1 mV / V
0 … 5 mV DC	± 0.05% of reading	1 mV / V	0.5 mV / V
Maximum input voltage		30V in all measuring ranges
Supply voltage measuring cells		5V or 10V
Maximum current		140-mA
Maximum number of measuring cells (with 350 Ohm measuring cells otherwise max. 140-mA)		5V supply: 1 … 8 measuring cells 10V supply: 1 … 4 measuring cells
Display		6-digit 7-segment LED display
Units (available to user)		g, kg, t, pcs, mg, lb, N, kN
Colour		Red
Character height		14 mm
Display area		-199999 … 999999
Decimal		Adjustable after each displayed digit
Under and Over range display		The display flashes
Measuring rate (adjustable) / response time		16 Hz / 63 ms 50 Hz / 20 ms 60 Hz / 17 ms
Refresh rate display		16 Hz
Electrical connections		Screw connections 1 … 2.5 mm²
Power supply		85 … 265V AC / DC
Input		Max. 1 W without output cards Max. 4 W with output cards
Degree of protection		Front: IP65
Assembly		Panel cut
Size panel cutout		92 x 44 mm / 3.6 x 1.7 in
Dimensions		96 x 48 x 91 mm / 3.7 x 1.9 x 3.6 in
Weight		About 150 g / < 1 lb
Operating temperature		0 … 50°C / 32 … 122°F
Storage temperature		-20 … 70°C / -4 … 158°F
Heating time		About 15 minutes

The post Force and Weight Indicator PCE-DPD-F1 appeared first on Amet Co.,Ltd.

Dillon FI-521

Alex — Wed, 15 May 2019 15:09:48 +0000

Product Features

3 Cell Memory
80 Hz Peak Capture Rate
IP65
2 RS-232 serial ports
RS-485
5 point curve linearization
Built-in real time and date clock
Units of measure:
- pound-force
- kilogram force
- Newtons
2 set point outputs
7-pin load cell quick disconnect (equipped)
4 remote keypad inputs
Analog output

Product Specifications

Display:
- 7 digits, 7-segment, 0.7″ (17 mm) ultra-bright LEDs with 14 annunciators
- Max display range -999,999 to 999,999
- Display update rate 10Hz
Keypad:
- 6 push buttons: select, cell, print, unit, zero, on/off
Real Clock:
- Built-in nonvolatile real time and date
Communication:
- Serial Port 1: Full-duplex RS-232
- Serial Port 2: Full-duplex RS-232 or half-duplex RS485
- Baud Rate: Selectable 1200-2400-4800-9600-19200/38400-57600 bps
- Data Output Format: 8N1, 7O1, 7E1
- Serial Output: Select up to 14 additional data parameters
- RS-485: 0-5VDC
- Analog Output: 0 to 2.5VDC (≤ 2.5mA)
- Remote Input: Select,cell, print, unit, zero, off
- Setpoint 1 & 2: 5 to 24VDC (.5A max) external, 5 to 8VDC (≤ .1A) internal

The post Dillon FI-521 appeared first on Amet Co.,Ltd.