Magnetometer / Magnetic Field Detector - Amet Co.,Ltd

Magnetometer PCE-MFM 4000-ICA Incl. ISO Calibration Certificate

Admin Amet — Tue, 11 May 2021 09:20:45 +0000

Magnetometer for AC and DC magnetic fields /

Precision and standard sensor / LCD display / SD data logger /

Serial interface / Tabletop device

The Gauss meter is used in the laboratory and quality assurance to measure the strength of magnetic fields. The Gauss meter is delivered with two different sensors. There is a magnetic field sensor for general measurements in the Gauss and milli-Tesla range, as well as a precision sensor for measurements in the milli Gauss and micro-Tesla range. The Gauss meter sensors have automatic temperature compensation. The Gauss meter can be used for measurements of DC and AC magnetic fields. The Gauss meter shows the polarity of the DC magnetic field on the display next to the measured value. This precise Gauss meter can be connected to a PC via serial interface for measurement value analysis.

The Gauss meter also has a data logging function. The Gauss meter is able to save the measured values on an SD memory card at a preset interval during the measurement. In addition to interval storage, up to 99 individual measured values can be stored in the memory at the push of a button. The measurement data are stored by the Gauss meter on the SD card in Excel format. This has the advantage that no additional software has to be used for the Gauss meter.

The Gauss meter is supplied as a table device and is particularly suitable for stationary measurements in QA, the test laboratory or also in research and. The bright display of the Gauss meter is easy to read at all times and shows all the necessary information about the magnetic field strength. The Gauss meter also has an automatic switch-off. The Gauss meter is supplied with 6 x 1.5V AA batteries or with a 9V plug-in power supply.

– Tabletop device with 2 sensors

General Probe Range: 0-3000 milli-Tesla (0-30,000 Gauss)

Precision Probe Range: 0-300 micro-Tesla (0-3000 milli-Gauss)

– For static and changing magnetic fields

– Highly accurate Transverse Hall sensor

– Different units selectable (mG / µT)

– Data storage on SD memory card

– Automatic shutdown

– Serial interface

– Max.- min.- hold function

– Incl. ISO calibration certificate

The post Magnetometer PCE-MFM 4000-ICA Incl. ISO Calibration Certificate appeared first on Amet Co.,Ltd.

Magnetometer PCE-MFM 4000

Admin Amet — Tue, 11 May 2021 09:19:15 +0000

Magnetometer for AC and DC magnetic fields /

Precision and standard sensor / LCD display / SD data logger /

Serial interface / Tabletop device

– Tabletop device with 2 sensors

General Probe Range: 0-3000 milli-Tesla (0-30,000 Gauss)

Precision Probe Range: 0-300 micro-Tesla (0-3000 milli-Gauss)

– For static and changing magnetic fields

– Highly accurate Transverse Hall sensor

– Different units selectable (mG / µT)

– Data storage on SD memory card

– Automatic shutdown

– Serial interface

– Max.- min.- hold function

Measuring function DC magnetic field precision sensor
Measuring range	± 30µT
	± 300 µT
	± 300 mG
	± 3000 mG

Resolution	0.01 µT
	0,1μT
	0.1 mG
	1 mG

Accuracy	± (2% of MB + 2 mG)
	@ ± 100µT / 1000 G

Measuring function DC magnetic field standard sensor
measuring range	± 300 mT
	± 3000 mT
	± 3000 G.
	± 30000 G.

Resolution	0.01 mT
	0.1 mT
	0.1 g
	1 G

Accuracy	± (5% of VAT + 10 Dgt)

Measuring function AC magnetic field standard sensor 50/60 Hz
Measuring range	30μT
	300 µT
	300 mG
	3000 mG

Resolution	0.01 µT
	0,1μT
	0.1 mG
	1 mG

Accuracy	± (2% of MB + 2 mG)
	@ 0 … 100µT / 1000 G

Measuring function AC magnetic field precision sensor 50/60 Hz
Measuring range	30μT
	300 µT
	300 mG
	3000 mG

Resolution	0.01 µT
	0,1μT
	0.1 mG
	1 mG

Accuracy	± (2% of MB + 2 mG)
	@ 0 … 100µT / 1000 G

Measuring function AC magnetic field standard sensor 50/60 Hz
Measuring range	150 mT
	1500 mT
	1500 g
	15000 G.

Resolution	0.01 mT
	0.1 mT
	0.1 g
	1 G

Accuracy	± (5% of VAT + 10 Dgt)

General technical data
Measuring rate	1 second
Measuring direction	Uniaxially
Display	LCD display
Features	Data hold / max. Min. Memory
Storage	Data logger single value memory
Data logger storage rate	1, 2, 5, 10, 30, 60, 120, 300, 600, 1800, 3600 s
Interface	Serial
Environmental conditions	0 … 50°C / 32 … 122°F, max. 85% RH
Power supply	6 x 1.5V AA batteries
	Optional 9V power supply
Current consumption	Approx. 138-mA
Dimension
Device	292 x 236 x 98 mm / 11.5 x 9.3 x 3.9 in
Precision sensor	195 x 25 x 19 mm / 7.7 x 1 x 0.7 in
Standard sensor	177 x 29 x 17 mm / 7 x 1.1 x 0.7 in

Weight	275 g / < 1 lb

The post Magnetometer PCE-MFM 4000 appeared first on Amet Co.,Ltd.

Magnetometer PCE-MFM 2400-ICA incl. ISO Calibration Certificate

Admin Amet — Tue, 11 May 2021 09:17:06 +0000

Precise Magnetometer with an accuracy of 1% /

automatic switch-off / transverse measurement / backlight /

Tesla and Gauss measurement / for static magnetic fields

With a measuring range of 2,400 mT, the magnetometer covers a wide range of measuring tasks. The field strength meter has an accuracy of 1%. This makes the Electromagnetic Radiation Detector a very precise measuring device. For example, the Electromagnetic Radiation Detector can be used to test relays and permanent magnets for the existing magnetic field. The Electromagnetic Radiation Detector is therefore used in production processes or in quality control.

With the backlight on the Electromagnetic Radiation Detector, the measured values are always easy to read even in poor lighting. Thanks to the automatic switch-off function, the Electromagnetic Radiation Detector automatically switches itself off after 5 minutes. This ensures that the battery of the Gauss meter does not discharge completely.

– very precise measurement technology

– measuring range up to 24,000 G and 2,400 mT

– transverse sensor

– for measuring static magnetic fields

– automatic shutdown

– incl. ISO Calibration Certificate

The post Magnetometer PCE-MFM 2400-ICA incl. ISO Calibration Certificate appeared first on Amet Co.,Ltd.

Magnetometer PCE-MFM 2400+ICA incl. ISO Calibration Certificate

Admin Amet — Tue, 11 May 2021 09:14:05 +0000

Magnetometer PCE-MFM 2400+ICA incl. ISO Calibration Certificate
High-precision magnetic field analyzer with an accuracy of 1% / Automatic switch-off / Axial measurement / Backlight / Tesla and Gauss measurement / For static magnetic fields

Magnets find application in many processes in industry, research and quality control. Regular magnetic field measurements ensure optimal use in various areas. Continuous control of the permanent magnets prevents follow-up costs due to unplanned downtimes. The ideal auxiliary tool for checking permanent magnets is the magnetic field analyzer from PCE Instruments. The magnetic field analyzer is a compact precision instrument. It was specially developed to measure magnetism and is suitable for Tesla and Gauss measurements. The magnetic field analyzer is used wherever it goes about the field strength measurement on permanent magnets. Here, it convinces by the highest reliability and precision and at the same time, by the simplicity of the application.

Electromagnetic Field Meter / Field Analyser Application in the industry.With a measuring range of 0 to 200 mT or 200 to 2.400 mT, the magnetic field analyzer covers a wide range of measuring tasks. The magnetic field analyzer has a practical switching function and can automatically switch between the two measuring ranges. If the current value is in the range 0 to 200 mT, the magnetic field analyzer switches to the 200 mT measuring range. If the 200 mT mark is exceeded, the device automatically switches to the 2000 mT range. The display clearly informs the user about the current range.

The magnetic field analyzer allows very precise magnetic field measurements with an accuracy of 1%. Thus, with the help of the magnetic field analyzer, for example, relays and permanent magnets can be tested for the existing magnetic field. The magnetic field analyzer clearly shows the measurement results on its large display. Due to the backlight, the measured values are easy to read even in the poor lighting conditions.

The magnetic field analyzer consists of a compact display device and a sensor. The sensor uses the Hall-effect to determine the magnetic fields. The application of the magnetic field analyzer is simple and effective. Before each measurement, the sensor should be adjusted to the ambient temperature. To record the measured values, the cover must be removed and the sensor head should be placed in the middle of the magnetic field to be measured. In order to be able to read the respective maximum value correctly, the magnetic field analyzer has a hold function. At the push of a button, the magnetic field analyzer shows the measured maximum value in the negative and positive range.

Magnetometer in an application

In addition, the manufacturer has equipped the magnetic field analyzer with another practical function: if necessary, the measuring device can indicate the direction of incidence of the magnetic field lines.

In order to protect the battery of the magnetic field analyzer, the measuring instrument has an automatic switch-off. If there is no input for five minutes, the magnetic field analyzer switches off automatically and prevents the battery from being completely discharged.

Application Areas for Magnetic Field Analyzers

The magnetic field analyzer impresses by maximum reliability, precision and user-friendliness. The magnetic field analyzer is suitable for universal magnetic measurements on industrial, mechanical and electrical materials as well as for laboratory use. Besides, the magnetic field analyzer is also used in teaching and research. The magnetic field measuring device is the ideal companion for everyone who needs to determine the properties of the permanent magnets, for example to ensure their effectiveness and to determine the magnetic field strength. The magnetic field analyzer is therefore ideal for reliable instant analyzes, it is versatile and easy to use at the same time. Due to the handy and robust design and the battery operation, the magnetic field analyzer can be used mobile. Its simple operation makes the magnetic field analyzer irreplaceable during the measurement of the field strength on permanent magnets and it is also suitable for inexperienced users. The users appreciate the reliability and accuracy of the magnetic field analyzer. The Gauss meter is used, for example, in plant engineering or mechanical engineering to check the functionality and safety of the magnetic separators or magnetic filters. This ensures that production-relevant processes can be carried out without interruptions caused by the defective separation mechanisms. Magnet manufacturers also use the magnetic field analyzer in quality control to determine the magnetic field strengths.

More info

With a measuring range of 2,400 mT, the Electromagnetic Field Meter covers a wide range of measuring tasks. The field strength meter has an accuracy of 1%. This makes the Electromagnetic Field Meter a very precise measuring device. For example, the Electromagnetic Field Meter can be used to test relays and permanent magnets for the existing magnetic field. The Electromagnetic Field Meter is therefore used in production processes or in quality control.

With the backlight on the Electromagnetic Field Meter, the measured values are always easy to read even in poor lighting. Thanks to the automatic switch-off function, the Electromagnetic Field Meter automatically switches itself off after 5 minutes. This ensures that the battery of the Electromagnetic Field Meter does not discharge completely.

– Very precise measurement technology

– Measuring range up to 24,000 G and 2,400 mT

– Axial sensor

– For measuring static magnetic fields

– Automatic shutdown

– incl. ISO Calibration Certificate

Measuring range	0… 200 mT
	200… 2,400 mT
	0 … 2,000 G
	2,000 … 24,000 G

Accuracy	± 1% of reading

Resolution	0.01 mT
	0.1 g

Measuring direction	Axial
Magnetic field	Static (DC)
Unit	mT, G
Power supply	1 x 9V block battery
Automatic shutdown	Automatic shutdown after 5 minutes in idle status
Modes	Hold mode, measurement mode
Display	Backlight digital 4-digit value display
Operating temperature	0… 50°C / 32 … 122°F
Storage temperature	-20… 50°C / -4 … 122°F
Dimensions	185 x 97 x 40 mm / 7.28 x 3.82 x 1.57 inch
Weight	310 g / < 1 lb
Sensor	Hall sensor axial, cable length approx. 2 m / 6.6 ft

The post Magnetometer PCE-MFM 2400+ICA incl. ISO Calibration Certificate appeared first on Amet Co.,Ltd.

Magnetometer PCE-G28-ICA incl. ISO Calibration Certificate

Admin Amet — Tue, 11 May 2021 09:12:27 +0000

PCE-G28-ICA is a portable, handheld magnetometer that detects electromagnetic fields (EMFs) and displays measurement results in milliGauss (mG) or microTesla (µT). This EMF radiation detector comes with an external 3-axis electromagnetic sensor (X, Y, Z direction).
– Measurement range: 0 … 20000 mG / 0 … 2000 µT
– Accuracy: ± 4% + 3 digits / ± 5% + 3 digits / ± 10% + 5 digits
– Resolution: 0.1 mG / 0.01 µT
– Detects electromagnetic fields (EMFs) on three axes (X, Y, Z direction)
– Displays measurement results in milliGauss (mG) or microTesla (µT)
– Comes with an external 3-axis electromagnetic sensor
– Data hold functionality
– Ideal tool for checking transformers and measuring EMFs generated by power lines, computer monitors, electric motors and installations
– Meets IEC 801-1 (EN 50081-1) / IEC 204 (EN 60204) standards
– Measures EMFs through casings, coverings and housings, eliminating the need to dismantle parts for inspection
– incl. ISO Calibration Certificate

The post Magnetometer PCE-G28-ICA incl. ISO Calibration Certificate appeared first on Amet Co.,Ltd.

Magnetometer PCE-MFM 2400+

Admin Amet — Tue, 11 May 2021 09:11:17 +0000

Magnetometer PCE-MFM 2400+
High-precision magnetic field analyzer with an accuracy of 1% / Automatic switch-off / Axial measurement / Backlight / Tesla and Gauss measurement / For static magnetic fields

Magnetometer in an application

Application Areas for Magnetic Field Analyzers

More info

– Very precise measurement technology

– Measuring range up to 24,000 G and 2,400 mT

– Axial sensor

– For measuring static magnetic fields

– Automatic shutdown

The post Magnetometer PCE-MFM 2400+ appeared first on Amet Co.,Ltd.

Magnetometer PCE-MFM 2400

Admin Amet — Tue, 11 May 2021 09:10:03 +0000

Precise Magnetometer with an accuracy of 1% /

automatic switch-off / transverse measurement / backlight /

Tesla and Gauss measurement / for static magnetic fields

– very precise measurement technology

– Measuring range up to 24,000 G and 2,400 mT

– transverse sensor

– for measuring static magnetic fields

– automatic shutdown

The post Magnetometer PCE-MFM 2400 appeared first on Amet Co.,Ltd.

Magnetometer PCE-MFM 3500-ICA Incl. ISO Calibration Certificate

Admin Amet — Tue, 11 May 2021 09:08:53 +0000

Magnetometer PCE-MFM 3500-ICA incl. ISO calibration certificate
Gauss meter with external sensor / Measuring range up to 30,000 G / Leveling bubble / Built-up memory for up to 7,000 values / Software for live view and reading / Battery and also mains operation / Sensor cable approx. 1 m (3.3 ft) / Battery life approx. 100 hours

The gauss meter is a reliable measuring device for measuring the existing magnetic field. This gauss meter is suitable for measuring both static (permanent magnets) and alternating magnetic fields. The flat probe of the external probe on the Milli-Gauss meter allows the operator to perform measurements even in very small openings. The measuring range of up to 30,000 G in the gauss meter covers a wide range of measuring tasks. In addition to measuring the magnetic field, the gauss meter also measures the temperature at the same time. The Milli-Gauss Meter also has an adjustable alarm function. This adjustable alarm function in the gauss meter warns the operator immediately as soon as a set measured value is exceeded.

As an additional function, the gauss meter has a memory function. Thanks to the built-in memory, measured values can be stored automatically as well as manually with the gauss meter. To analyze the measured data, the gauss meter can be connected to a PC via the mini-USB interface. With the software, the data stored on the gauss meter can be read out and analyzed. In addition, the software can be used for live viewing and operation of the gauss meter.

– Adjustable alarm function
– Data memory with PC connection
– Temperature measurement
– Switchable AC / DC measurement
– Sensor alignment with bubble possible
– Rubber protective cover for the handset
– Incl. ISO calibration certificate

The post Magnetometer PCE-MFM 3500-ICA Incl. ISO Calibration Certificate appeared first on Amet Co.,Ltd.

Magnetometer PCE-MFM 3000-ICA Incl. ISO Calibration Certificate

Admin Amet — Tue, 11 May 2021 09:07:35 +0000

Magnetometer PCE-MFM 3000-ICA incl. ISO calibration certificate
Portable handheld AC / DC magnetic field detector

PCE-MFM 3000 is a handheld gauss meter that detects both static (DC) permanent magnet (rare earth) magnetic and dynamic (AC) electromagnetic fields (EMFs) and displays measurement results in gauss (G) or milli Tesla (mT). This portable magnetic field measuring device comes with an external sensor and features an RS-232 port for downloading data to a PC.

– Measurement range: 0 … 30000 G / 0 … 3000 mT
– Accuracy: ± 5%; + 20 digits (static) / + 10 digits (dynamic)
– Resolution: 0.1 G / 0.01 mT
– Detects both static (DC) permanent magnetic and dynamic (AC) electromagnetic fields (EMFs)
– Displays measurement results in gauss (G) or milli Tesla (mT)
– Comes with an external sensor
– Features an RS-232 port for downloading data to PC
– Max, min, data hold and auto shutdown power-saving functionality
– Ideal tool for checking magnetic valves, relays and air-core transformers
– Useful for assessing permanent magnets and rare earth magnets made of Neodymium Iron Boron (NdFeB), Samarium Cobalt (SmCo), Alnico and Ferrite (also known as ceramic)
– The external sensor’s small, flat tip allows easy access through gaps and into tiny spaces
– Measures through casings, coverings and housings, eliminating the need to dismantle parts for inspection
– Incl. ISO calibration certificate

The post Magnetometer PCE-MFM 3000-ICA Incl. ISO Calibration Certificate appeared first on Amet Co.,Ltd.

Magnetometer PCE-MFM 3500

Admin Amet — Tue, 11 May 2021 09:06:22 +0000

Magnetometer PCE-MFM 3500
Gauss meter with external sensor / Measuring range up to 30,000 G / Leveling bubble / Built-up memory for up to 7,000 values / Software for live view and reading / Battery and also mains operation / Sensor cable approx. 1 m (3.3 ft) / Battery life approx. 100 hours

The post Magnetometer PCE-MFM 3500 appeared first on Amet Co.,Ltd.

Measuring function	DC Milli Tesla
Measuring range	Resolution	Accuracy
300.00 mT	0.01 mT	± (4% + 10 Dgt)
2,000.0 mT	0.1 mT	± (4% + 10 Dgt)
2,000.1 … 3,000.0 mT	0.1 mT	N / A

Measuring function	DC Gauss
Measuring range	Resolution	Accuracy
3,000.0 G	0.1 G	± (4% + 10 Dgt)
20,000 G	1 G	± (4% + 10 Dgt)
20.0001 … 30.000 G	1 G	N / A

Measuring function	AC milli Tesla
Measuring range	Resolution	Accuracy
150.00 mT	0.01 mT	± (5% + 20 Dgt)
1,500.0 mT	0.1 mT	± (5% + 20 Dgt)

Measuring function	AC Gauss
Measuring range	Resolution	Accuracy
1,500.0 G	0.1 G	± (5% + 20 Dgt)
15,000 G	1 G	± (5% + 20 Dgt)

The accuracies refer to the following ambient conditions: 23°C / 73.4°F ± 5°C / 41°F, < 80% RH

Measuring function	Temperature
Measuring range	Resolution	Accuracy
-20 … 50°C	± 0.1°C	± 1.0°C
-4 … 122°F	± 0.18°F	± 1.8°F

AC frequncy range	40 … 500 Hz
Storage	Manual: up to 200 values
	Automatic: up to 7,000 values
Interface	Mini USB
Display	LC display, 5 digits, display up to 30,000
Sensor	Removable, cable length approx. 1 m / 3.3 ft
Automatic switch-off function	Off or after 15 minutes
Power supply batteries	6 x 1.5V AAA
Battery Life	About 100 hours
Power supply power supply	Primary: 100 … 240V
	Secondary: 9V, 0.5A

Measuring function	DC Milli Tesla
Measuring range	Resolution	Accuracy
300.00 mT	0.01 mT	± (4% + 10 Dgt)
2,000.0 mT	0.1 mT	± (4% + 10 Dgt)
2,000.1 … 3,000.0 mT	0.1 mT	N / A

Measuring function	DC Gauss
Measuring range	Resolution	Accuracy
3,000.0 G	0.1 G	± (4% + 10 Dgt)
20,000 G	1 G	± (4% + 10 Dgt)
20.0001 … 30.000 G	1 G	N / A

Measuring function	AC milli Tesla
Measuring range	Resolution	Accuracy
150.00 mT	0.01 mT	± (5% + 20 Dgt)
1,500.0 mT	0.1 mT	± (5% + 20 Dgt)

Measuring function	AC Gauss
Measuring range	Resolution	Accuracy
1,500.0 G	0.1 G	± (5% + 20 Dgt)
15,000 G	1 G	± (5% + 20 Dgt)

The accuracies refer to the following ambient conditions: 23°C / 73.4°F ± 5°C / 41°F, < 80% RH

Measuring function	Temperature
Measuring range	Resolution	Accuracy
-20 … 50°C	± 0.1°C	± 1.0°C
-4 … 122°F	± 0.18°F	± 1.8°F

AC frequncy range	40 … 500 Hz
Storage	Manual: up to 200 values
	Automatic: up to 7,000 values
Interface	Mini USB
Display	LC display, 5 digits, display up to 30,000
Sensor	Removable, cable length approx. 1 m / 3.3 ft
Automatic switch-off function	Off or after 15 minutes
Power supply batteries	6 x 1.5V AAA
Battery Life	About 100 hours
Power supply power supply	Primary: 100 … 240V
	Secondary: 9V, 0.5A