Paint Test Equipment / Paint Testing Equipment - Amet Co.,Ltd

Paint Thickness Tester PCE-USC 30

Admin Amet — Wed, 12 May 2021 08:49:31 +0000

PCE-USC 30 is a coating thickness gauge designed for the non-destructive testing (NDT) and non-destructive evaluation (NDE) of electrically conductive materials. This portable, handheld thickness meter detects surface defects and measures layer thicknesses using an eddy current. The PCE-USC 30 material tester also measures metal conductivity in accordance with the International Annealed Copper Standard (IACS).

The PCE-USC 30 thickness gauge has myriad applications including weld seam testing, crack detection, metallurgical and material sorting tests, quality assurance and control, aviation component testing of turbine blades, and pipeline and container testing in the chemical, oil and gas industries.

– Frequency range: 0.01 … 16000 kHz
– Visually depicts surface defects on screen
– 4.3″ full-color display (TFT)
– Ergonomic design
– Long battery life

Frequency range: 0.01 … 16000 kHz
Probe voltage supply: 0, 5, 1, 2, 4, 6 V
Signal phase shift: 0 … 360 °
Sampling frequency: 0 … 10 kHz
Duration of signal superimposition: 0 / 0.5 / 1/2/3/4 seconds
Alarm: Circular, horizontal line, circle sector, cut off
Display: Full-color display (TFT)
Display size: 4.3 “(diagonal)
Display resolution: 800 x 480 pixels
Amplification adjustment: 0 … 100 dB
Filters: Low-pass (1 … 4000 Hz), high-pass (1 … 4000 Hz), band, differential, average
Average interval between measurement errors: 4000 hours
Power supply: 12 V battery
Battery capacity: 4500 mAh
Continuous runtime per battery charge: Approx. 8 hours
Operating temperature: -20 … +45 ° C
Weight: Approx. 0.9 kg
Dimensions: 230 x 135 x 98 mm

The post Paint Thickness Tester PCE-USC 30 appeared first on Amet Co.,Ltd.

Paint Viscosity Tester Viscolite d15

Admin Amet — Wed, 12 May 2021 08:46:59 +0000

Viscolite d15 is a portable resonant or vibrational viscometer used in industrial and research applications to measure viscosity in very small samples 10 ml / 0.34 oz and up. Featuring a built-in thermometer and a nearly maintenance-free design with no openly rotating parts, this handheld viscometer is delivered with one 316L stainless steel measuring probe and displays measurements in centipoise (cP). The energy loss measurement during vibration yields very high accuracy in very small vessels.

– Uses resonant frequency vibration to measure fluid viscosity
– No moving parts to damage, easy cleanup, and virtually maintenance free
– Measures every 1.5 second
– Produces no compression or sound waves
– Can be used in any vessel, regardless of size
– Comes with an ISO calibration certificate
– Includes a carrying case

Technical specifications
Measuring principle	Vibrational viscometer
Temperature compensation Viscosity range	Immediate via integrated thermometer
Centipoise (cP)	0 … 5,000 cP (mPa.S)
General specifications
Reproducibility	Better than 1%
Temperature range	-20 … +120 °C / -4 … +248 °F
Power supply	4 x 1.5 V AA batteries
Min. sample volume	10 ml (cc) / 0.34 oz
Min. sample mass	< 500 g / 1.11 lb
Display min.	500 g
Approx. length of measuring probe	215 mm / 8.47 in
Binding	Acetal (Delrin®)
Meter enclosure protection class	IP65
Safety certificate	“Safe area”

See user manual for complete technical specifications and operating instructions.

The post Paint Viscosity Tester Viscolite d15 appeared first on Amet Co.,Ltd.

Paint Thickness Tester PCE-USC 20

Admin Amet — Wed, 12 May 2021 08:44:48 +0000

PCE-USC 20 is a portable or benchtop ultrasonic tester or ultrasonic thickness gauge with a 5.7″ TFT color LCD screen. This ultrasound-based thickness meter uses one or two contact transducers (four different probes included; 90 °, 70 °, 60 °, 45 °) to measure material or wall thickness, detect flaws or defects in welds, and monitor the effects of corrosion on pipes and tanks.

PCE-USC 20 is an ultrasonic thickness gauge used for non-destructive testing (NDT) and inspection in a wide variety of applications in industries such as chemical, oil and gas, metallurgical, manufacturing, quality control, metalworking, welding, machining, engineering, product research and development, construction, transportation and aerospace.

– Measurement range: 0.5 … 9999 mm (steel; longitudinal wave)
– Operating frequency range: 0.5 … 20 MHz
– Sound velocity: 1000 … 15000 m/s (continuously adjustable)
– AVG and DAC evaluation methods, display and probes delay, damping and reinforcing functions, export and reporting functions
– Saves up to 500 records to memory
– Lightweight design for ease of portability
– Complies with EN12668-1

Technical specifications
Measurement range	0.5 … 9999 mm (longitudinal shaft steel), continuously adjustable
Sound velocity	1000 … 15000 m/s, continuously adjustable, coarse adjustment
Display delay	-10 … 2000 mm
Probe delay	0.00 … 199.9 µs
Transmitting impulse	400 V negative signal peaks
Damping (impulse generator)	50 / 100 / 200 / 500
Work mode	One- or two-probe measurement
Operating frequency range	0.5 … 20 MHz
Pulse repetition frequency	40 / 250 /1000 Hz optional
Amplification / gain (receiver)	0 … 110 dB
Rectification (receiver)	Whole wave, positive half wave, negative half wave, high frequency representation
Alarm limits	Limit A (Gate A) and Limit B (Gate B), Adjustable as positive or negative peak with automatic (visual or audible) alarm
Measurement mode	Limit value / Extreme value mode
Measurement deviation horizontal linearity	≤0.1 %
Measurement deviation vertical linearity	≤3 %
Excess sensitivity	≥62 dB
Dynamic range	≥40 dB
Resolution remote field	≥30 dB
Sampling rate	400 MHz
Measurement data storage	500 records
Signal reproduction	Permanent recording of signals with the playback of dynamic echoes
Surface adjustment	Automatic adjustment of the error position of the angled probes
Automatic amplification	20 … 80 %, in 1 % steps
Menu language	English, Chinese
Interface	USB-A, USB-B, Ethernet
Display	5.7 ” TFT color LCD (640 x 480 pixels)
Operating temperature	-10 … +50 °C
Power supply	AC: 100 … 240 V DC: 15 V / 4 A
Battery	Li-ion battery (10.8 V, 5200 mAh)
Battery opearting time per charge	>6 hours
Protection class	IP54
Weight	1.4 kg (incl. battery)

The post Paint Thickness Tester PCE-USC 20 appeared first on Amet Co.,Ltd.

Paint Viscosity Tester Viscolite d21

Admin Amet — Wed, 12 May 2021 08:41:21 +0000

Viscolite d21 Portable Viscometer
Mobile viscosity meter for testing, development, manufacture and quality control in the food, chemical, paint and cosmetics industries as well as for the study of materials

Viscolite d21 is a portable resonant or vibrational viscometer used in industrial and research applications to measure viscosity in samples 100 ml (100 cc) / 3.39 oz and up. Featuring a built-in thermometer with automatic temperature compensation and a nearly maintenance-free design with no openly rotating parts, this handheld viscometer is delivered with one stainless steel measuring probe and displays measurements in centipoise (cP). The energy loss measurement during vibration yields very high accuracy in very small vessels.

– Uses resonant frequency vibration to measure fluid viscosity
– No moving parts to damage, easy cleanup, and virtually maintenance free
– Reading updates every 1.5 seconds
– Produces no compression or sound waves
– Can be used in any vessel, regardless of size
– Comes with an ISO calibration certificate
– Includes a carrying case

Technical specifications
Measuring principle	Vibrational viscometer
Automatic temperature compensation Viscosity range	Immediate via integrated thermometer
Centipoise (cP)	0 … 10,000 cP (mPa.S)
General specifications
Repeatability	Better than 1%
Temperature range	-20 … +120 °C / -4 … +248 °F
Power supply	4 x AA (or equivalent) alkaline batteries
Min. sample volume	100 ml (100 cc) / 3.39 oz
Probe weight	< 700 g / 1.55 lb
Display unit weight	500 g
Overall length	305 mm / 12.01 in
Materials	Enclosure: Acetal (Delrin®) Wetted parts: 316L stainless steel
Enclosure ingress protection rating	IP65
Safety certification	Safe area

The post Paint Viscosity Tester Viscolite d21 appeared first on Amet Co.,Ltd.

Paint Thickness Tester PCE-FD 20

Admin Amet — Wed, 12 May 2021 08:38:38 +0000

PCE-FD 20 is a portable ultrasonic tester or ultrasonic thickness gauge with a large LCD screen that displays A-scan maps of ultrasonic signals as well as B-scan cross sections. Ideal for use in mechanical engineering, aerospace and metallurgical applications, this high-frequency ultrasound-based thickness meter uses a contact transducer (two different probes included; 45° and 90°) to measure material thickness and identify flaws and defects such as discontinuity in welds.

– Operating frequency range: 1 … 10 MHz
– Measured time interval range: 6 … 1000 microseconds (µs)
– Sound velocity: 1000 … 9999 m/s
– Implements shadow, echo and mirror-shadow testing methods
– Features a USB interface for downloading data to PC for detailed analysis
– Lightweight
– Battery or electric power
– 1.5 m long probe cable

Technical specifications

Operating frequency range	1 … 10 MHz
Measure time interval range (scan duration)	6 … 1000 microseconds (µs)
Sound velocity range	1000 … 9999 m/s
Deviation of measurement of time intervals	Not exceed ± 0.025 µs
Max. deviation of amplitude of signals at receiver input in 0 … 110 dB range	Not exceed ± 0.5 dB
Testing gain region	125 dB
Averaging over the quantity of starts	1 … 16
Range of time-variable gain (TVG) / Number of control points TVG	40 dB / 15
Duration of excitation pulse to load	0 … 0.5 µs
Amplitude of excitation pulse to 50 Ohm load, not less	100, 200, 300
Operating frequency range of receiver at -3 dB	1 … 10 MHz
Deviation of amplitudes of input signals in 10 … 100% range of screen height	Not more than 1 dB
Scanning	1 … 1000 µs
Scanning delay	0 … 2000 µs
Measurement range of time intervals	0 … 1000 µs
Prism of probe delay	0 … 15 µs
Automatic signaling of defects (AFS)	Dual-gate
Setting range of AFS gates	0 … 2000 µs
Adjusting thresholds of AFS gates	0 … 100%
Detection of signals (receiver)	Positive half-wave, radio mode
Dimensions of device (approx.)	80 x 162 x 35 mm / 3.14 x 6.37 x 1.37″
Dimensions display (approx.)	48 x 74 mm / 1.88 x 2.91″
Power supply	100 … 250 V AC or 3 x 1.5 V AA batteries
Weight (approx.)	250 g / 0.55 lb (without batteries)

The post Paint Thickness Tester PCE-FD 20 appeared first on Amet Co.,Ltd.

Paint Roughness Tester PCE-RT 1200BT-ICA inc. ISO Calibration Cert.

Admin Amet — Wed, 12 May 2021 08:32:16 +0000

Bluetooth Handheld Surface – Roughness Tester PCE-RT 1200BT-ICA incl. ISO Calibration Certificate
Micro USB interface / Positioning device / Various measurement parameters / App connection via Bluetooth / Optionally with Bluetooth printer / Data memory for 20 measurement processes

With this portable Bluetooth handheld surface – roughness tester, you can quickly and precisely measure the roughness of a wide variety of surfaces. To do this, the roughness meter with Bluetooth is placed on the surface to be tested. With the positioning device, the roughness meter can be aligned on a wide variety of surfaces. A measurement with the Bluetooth roughness meter can be carried out at the touch of a button. After the measurement has been carried out, the measured value is shown to the operator on the display of the Bluetooth roughness meter. A progress diagram of the surface is also shown on the display.

When measuring the surface roughness, there are various measurement parameters that provide information about the roughness of the surface, for example the maximum roughness depth, the mean roughness depth and many other measurement parameters. After a measurement has been carried out, these can be displayed in the data memory of the Bluetooth roughness meter.

After each measurement of the roughness, the recorded measured values are saved in the roughness meter with Bluetooth. Up to 20 measurement sequences can be saved with the Bluetooth roughness meter. In order to process or analyze these further, the Bluetooth roughness meter can be connected to a PC via the micro-USB interface and read out, analyzed and further processed using the free software in the download portal.

This roughness meter has a Bluetooth interface. This Bluetooth interface can be used to establish a direct connection with an Android device. This has several advantages. The stored data can be displayed and analyzed directly on the Android device. The measured values measured by the Bluetooth roughness meter can also be exported and forwarded by the mobile device. In addition to transferring the measured values, it is also possible to control the Bluetooth roughness meter via the connected mobile device. This means that the measurement parameters can be set directly on the roughness meter with Bluetooth. At the same time, a measurement process can be started with the Bluetooth roughness meter via the Bluetooth interface. This has the particular advantage that, in contrast to starting via the buttons on a roughness meter, no vibrations are transmitted to the Bluetooth roughness meter. As a result, the operator receives a more precise and at the same time more reliable measurement result from the Bluetooth roughness meter.

– Very compact
– Easy to handle
– A large OLED display
– 4 measurable parameters of roughness
– The probe of the roughness meter consists of a high-quality diamond
– The display of the roughness meter outputs the measured values in tabular form
– The measured values can also be output by the roughness meter as a graph
– A micro-USB interface for online data transmission to a PC (for example useful for serial measurement or laboratory measurement)
– An internal rechargeable battery (3000 measurements with one battery charge (Li-ion))
– Bluetooth
– App
– incl. ISO Calibration Certificate

Measurement parameters	Ra, Rz, Rq, Rt
Measuring ranges	Ra, Rq: 0.005 … 16.00 µm / 0.197 … 629.921 µin Rz, Rt: 0.002 … 200.0 µm / 0.079 … 7874.016 µin
Radius probe tip	5 µm/ 196.850 µin
Material probe tip	Diamond, 90° angled
Max. recommended force for static measurement	4 mN (0.4 gf)
Radius longitudinal guide bar	45 mm / 1.77″
Standards	ANSIB46.1/ASMEB46.1 (DIN EN ISO 4287)
Maximum driving distance	15 mm / 0.59″
Measuring principle	Inductive
Cut-off wavelength	0.25 mm / 0.8 mm / 2.5 mm / 0.009″ / 0.03″ / 0.098″
Testing speed	0.135 mm/s at cut-off wavelength: 0.25 mm 0.5 mm/s at cut-off wavelength: 0.8 mm 1 mm/s at cut-off wavelength: 2.5 mm Reversing speed: 1 mm/s
Measuring accuracy	< ± 10%
Repeatability	< 6%
Display	OLED
Units	μm / μinch (switchable)
Interface	Micro-USB, Bluetooth
Power supply	Rechargeable Li-ion battery
Dimensions L x W x H	150 x 60 x 43 mm / 5.9 x 2.36 x 1.69 in
Weight	370 g / < 1 lb

The post Paint Roughness Tester PCE-RT 1200BT-ICA inc. ISO Calibration Cert. appeared first on Amet Co.,Ltd.

Paint Roughness Tester PCE-RT 2000BT

Admin Amet — Wed, 12 May 2021 08:29:51 +0000

Bluetooth Roughness Tester PCE-RT 2000BT with micro USB interface
Positioning device / Various measurement parameters / App connection via Bluetooth /
Optionally with Bluetooth printer / Data memory for 20 measurement processes

With this portable Bluetooth roughness tester, you can quickly and precisely measure the roughness of a wide variety of surfaces. To do this, the roughness meter with Bluetooth is placed on the surface to be tested. With the positioning device, the roughness meter can be aligned on a wide variety of surfaces. A measurement with the Bluetooth roughness meter can be carried out at the touch of a button. After the measurement has been carried out, the measured value is shown to the operator on the display of the Bluetooth roughness meter. A progress diagram of the surface is also shown on the display.

– OLED display
– Measures Ra, Rq, Rsm, Rsk, Rz, Rt, Rp, Rv, Rc
– Numerical and graphical display of measured values
– Micro USB interface
– 3 different cutoff wavelengths
– Statistical functions
– Battery operation
– Bluetooth
– Download free app from the Google Play Store

Measurement parameters	Ra, Rq, Rsm, Rsk, Rz, Rt, Rp, Rv, Rc
Measuring ranges	Ra, Rq, Rc: 0.005 μm … 16 μm Rz, Rt, Rp, Rv: 0.02 μm … 200 μm Rsm: 5 μm … 1000 μm Rsk: -1 … 1
Radius stylus tip	5 μm
Material stylus tip	Diamond, 90° angled
Max. recommended force for static measurement	4 mN (0.4 gf)
Measuring principle	Inductive
Radius longitudinal guide bar	45 mm / 1.8 in
Standards	ANSIB46.1/ASMEB46.1 (DIN EN ISO 4287)
Maximum driving distance	15 mm / 0.6 in
Cut-off wavelength (cut off)	0.135 mm/s at cut-off wavelength: 0.25 mm 0.5 mm/s at cut-off wavelength: 0.8 mm 1 mm/s at cut-off wavelength: 2.5 mm Reversing speed: 1 mm/s
Measurement accuracy	<± 10%
Repeatability	<6%
Display	OLED
Units	μm / μinch (switchable)
Interface	Micro USB, Bluetooth
Power supply	Rechargeable Li-ion battery

The post Paint Roughness Tester PCE-RT 2000BT appeared first on Amet Co.,Ltd.

Paint Viscosity Tester PCE-RVI 4 VP20

Admin Amet — Wed, 12 May 2021 08:26:06 +0000

PCE-RVI 4 VP20 Viscometer / Viscosity Meter
Rotational viscometer to measure viscosity according to the Brookfield method

PCE-RVI 4 VP20 is a rotational viscometer used in industrial and research applications to measure viscosity according to the Brookfield method. Featuring a simple, lightweight construction for ease of portability, this digital viscometer can be used in the laboratory or in the field. This viscometer is delivered with spindles R2, R3, R4, R5, R6 and R7 and displays measurements in millipascal-second (mPa.s).

Basic operation
To turn on the viscometer, press and hold the enter button for 2 seconds. Once the display shows the rotational speed, the current viscosity, the selected spindle, the battery status and the full scale percentage, press the up or down buttons to find the applicable spindle and press the enter button to start the measurement. Be sure your sample is in place before pressing the start button, as the start button begins rotation of the spindle. When you have finished your viscosity test, press enter to stop the measurement and the rotation.

Ideal for testing, development, manufacture and quality control in the food, chemical, paint and cosmetics industries as well as for the study of materials, this classic viscometer:

– Contains a bright, easy-to-read LCD digital display
– Includes a protective, foam-filled, hard-plastic carrying case
– Comes with a factory / manufacturer calibration certificate
– Offers a max. battery life of up to 30 hours of continuous use
– Maintains a constant speed of 20 revolutions per minute (rpm)

The post Paint Viscosity Tester PCE-RVI 4 VP20 appeared first on Amet Co.,Ltd.

Paint Adhesion Tester PCE-PST 1

Admin Amet — Wed, 12 May 2021 08:25:56 +0000

PCE-PST 1 Adhesion tester for Edge Tests
Measures the adhesion to substrates / Mobile, rugged design / Measures up to 500 N / High accuracy / PC evaluation possible

PCE-PST 1 adhesion tester is designed to check the adhesive force of edges on support materials. With the adhesion tester, checks can be made with respect to the quality of workmanship. Feed speed, travel distance, tension, and traction angle are fixed. Ball transfer units on the guide surface of the Test Stand reduce the coefficient of friction. Likewise the self-locking jaws and smooth guide rollers always guarantee reproducible and comparable results. Measurement errors caused by the “human factor” are reduced to a minimum.

The PCE-PST 1 adhesion tester is designed for adhesive forces up to 500 N or 110 pounds. With a travel distance of 100 mm (3.9 in) and a feed rate of 0.3 m / min (11.8 in / min), testing an edge can be performed by trained personnel in less than a minute. After clamping the test edge, measurement takes place in automatic mode as soon as the triggering force of 20 N is reached. At the end of the measurement process, statistical data appears on the display, including Min. and Max. values, as well as an average value of edge band strength. If necessary, the evaluation of the measurement can also be done via the included software which enables different statistical values and the display of a force-time diagram.

– For adhesive forces to 500 N or 110 pounds
– High repeatability
– Defined test parameters
– Mobile implementation
– Automatic and manual measurement mode
– Evaluation via software

Measuring range	500 N / 50 kg / 110 lbs
Measurable edge thickness	0.4 mm … 3.5 mm 0.02 in … 0.14 in
Measurable plate thicknesses	10 mm … 64 mm 0.4 in … 2.5 in
Travel speed	0.3 m/min / 11.8 in/min
Traverse	100 mm / 3.9 in
Measurement accuracy	± 0.1% of the measuring range
Resolution	0.1 N / 0.010 kg / 0.02 lbs
Max. overload	± 20%
Display	Graphic display with backlight 61 mm x 34 mm / 2.4 in x 1.3 in
Operating modes	Manual / automatic
Interface	USB
Environmental conditions	-10°C … 40°C / 14°F … 104°F
Weight	ca. 9 kg / 19.8 lbs
Power supply	230V / 110V / 12V; 1.2 A
Dimensions (LxWxH)	490 mm x 210 mm x 150 mm 19.3 in x 8.3 in x 5.9 in

The post Paint Adhesion Tester PCE-PST 1 appeared first on Amet Co.,Ltd.

Paint Viscosity Tester PCE-RVI 3 VP20

Admin Amet — Wed, 12 May 2021 08:24:35 +0000

PCE-RVI 3 VP20 Portable Viscometer / Viscosity Meter
Handheld, portable, mobile, rotational viscometer to measure viscosity according to the Brookfield method

PCE-RVI 3 VP20 is a portable rotational viscometer used in industrial and research applications to measure viscosity according to the Brookfield method. Featuring an ergonomic design and up to 30 hours of battery life during continuous operation, this handheld viscometer is delivered with spindles R2, R3, R4, R5, R6 and R7 and displays measurements in millipascal-second (mPa.s).

Basic operation
To turn on the viscometer, press and hold the enter button for 10 seconds. Once the display shows the rotational speed, the current viscosity, the selected spindle, the battery status and the full scale percentage, press the up or down buttons to find the applicable spindle and press the enter button to confirm your selection. Press enter again to start the measurement. Be sure your sample is in place before pressing the enter button, as the enter button begins rotation of the spindle. When you have finished your viscosity test, press enter to stop the measurement and the rotation.

Ideal for testing, development, manufacture and quality control in the food, chemical, paint and cosmetics industries as well as for the study of materials, this mobile viscometer:

– Provides fast, reliable viscosity measurements on the go
– Comes with a factory / manufacturer calibration certificate
– Includes a protective, foam-filled, hard-plastic carrying case
– Offers a max. battery life of up to 30 hours of continuous use
– Maintains a constant speed of 20 revolutions per minute (rpm)

The post Paint Viscosity Tester PCE-RVI 3 VP20 appeared first on Amet Co.,Ltd.