Photometer - Amet Co.,Ltd

Photometer PCE-LMD 10

Admin Amet — Thu, 15 Dec 2022 06:30:04 +0000

Photometer with external probe / Sampling rate 4 Hz / Measuring range 0 … 400 kLux / Micro-USB interface / Units: lux, footcandle / Optionally with ISO calibration certificate

The photometer has a large measuring range of 0 … 400 lux. The illuminance is measured using an external silicon photodiode with a spectral filter. This means that the photometer can be positioned appropriately for every measuring task. The measured values can be displayed by the photometer in lux and in footcandles. In addition to the normal measured value display on the photometer, the measured value is also displayed on a scale.

The photometer has additional functions so that an analysis of the illuminance can be carried out. With the additional functions of the photometer, the largest and smallest measured value can be output using the “MIN” and “MAX” buttons. In addition, the displayed measured value can be set in relation to a reference using the “REL” button. With the “PEAK” function, the photometer records peak values. The photometer has a sampling rate of 10 µs.

The PCE-LMD 10 also has a data memory of 32,000 measured values. The measured values from the photometer can be read out and analyzed on the PC after a measurement. A live measurement on the PC with the photometer is also possible. The data from the photometer can be exported in CSV format for further processing.

The built-in 3.7V Li-Ion battery can be recharged from the photometer via a 5V DC connection via the micro-USB interface. Due to its measuring range and its various functions, the photometer is used to control the lighting in greenhouses, at the workplace in production workshops or in photo studios, for example. Optionally, the photometer can be equipped with an ISO calibration certificate.

– Rechargeable battery
– Micro USB interface
– Measuring range 0 … 400.0 kLux
– Lux and footcandle units
– LCD display with backlight
– Optionally with ISO calibration certificate

The post Photometer PCE-LMD 10 appeared first on Amet Co.,Ltd.

Photometer PCE-CP 11

Admin Amet — Tue, 08 Feb 2022 02:08:26 +0000

Multi-parameter photometer with Bluetooth interface / PC software / Cloud service / Cross-system synchronization of measured values / Up to 7 selectable parameters / For measuring e.g. pH, alkalinity, chlorine, cyanuric acid / Storage of measured values

The multi-parameter photometer is a mobile measuring device for liquid analysis. This enables the most varied of measurements to be carried out with the multi-parameter photometer. With this multi-parameter photometer, for example, it is possible to determine alkalinity, chlorine, cyanuric acid or the pH value. In order to carry out a measurement with the multi-parameter photometer, a water sample of 10 ml must be placed in a cuvette. The built-in LED in the multi-parameter photometer generates a test light in the wavelength ranges of 503 nm, 570 nm and 620 nm. A photodiode now recognizes the value to be measured based on the light transmission of the sample.

Each measurement is automatically saved by the multi-parameter photometer. The stored measured values can then be read out, for example, via a mobile device via the Bluetooth interface built into the multi-parameter photometer. A free app is available to analyze the measured values from the multi-parameter photometer. It is also possible to establish a Bluetooth connection between the multi-parameter photometer and a computer. Free software is also available for this, with which the measurement data can be analyzed. As another special feature of the multi-parameter photometer, the measurement data can be uploaded to a cloud using both variants and accessed from anywhere. This service for the multi-parameter photometer is also free of charge.

– Up to 7 selectable parameters
– Bluetooth connection with app
– Exchangeable and lockable cuvette
– 503 nm / 570 nm / 620 nm LED
– Automatic shutdown when inactive
– Many different menu languages
– Light detector: photodiode
– Cuvette: 36 x ø 21 mm / 3.6 x ø 2.1 cm (10 ml)

Chlorine
Measuring range	0.00 … 2.00 mg/l
	2.00 … 3.00 mg/l
	3.00 … 4.00 mg/l
	4.00 … 8.00 mg/l

Accuracy	0.10 mg/l
	0.23 mg/l
	0.75 mg/l
	1.00 mg/l

Resolution	0.01 mg/l

pH
Measuring range	6.50 … 8.40 pH
Accuracy	0.11 pH
Resolution	0.01 pH

Iron
Measuring range	0.00 … 0.20 mg/l
	0.20 … 0.60 mg/l
	0.60 … 1.00 mg/l

Accuracy	0.02 mg/l
	0.04 mg/l
	0.08 mg/l

Resolution	0.01 mg/l

Total hardness
Measuring range	0… 30 mg/l
	30… 60 mg/l
	60… 100 mg/l
	100… 200 mg/l
	200 … 300 mg/l
	300 … 500 mg/l

Accuracy	3 mg/l
	5 mg/l
	10 mg/l
	17 mg/l
	22 mg/l
	58 mg/l

Resolution	1 mg/l

Further specification

Units	mg/l, ppm
Hardness units	mg/l CaCO3, ppm, mmol/l KS 4.3,
	°dH (degree of German hardness),
	°e (degree English hardness / Degree Clark),
	°f (degree of French hardness)
Calibration	Zero point calibration
Light source	503 nm / 570 nm / 620 nm LED
Light detector	Photodiode
Power supply	4 x 1.5V AA batteries
Dimensions of the cuvette	36 x ø 21 mm / 3.6 x ø 2.1 cm (10 ml)
Menu languages	English, German, French, Spanish and Italian
Storage	Automatic storage of measured values and readout
Storage space	256 values
Interface	Bluetooth connection with app and PC software
Automatic shutdown	After 300 seconds of inactivity
Operating conditions	5… 45 °C, 20 … 90% RH non-condensing
Storage conditions	5… 45 °C, 20 … 90% RH non-condensing
Dimensions	165 x 95 x 50 mm / 6.5 x 3.7 x 2 in
Weight	230 g / 8.1 oz

The post Photometer PCE-CP 11 appeared first on Amet Co.,Ltd.

Photometer PCE-CP 04

Admin Amet — Mon, 07 Feb 2022 09:41:49 +0000

Multi-parameter photometer with Bluetooth interface / PC software / Cloud service / Cross-system synchronization of measured values / Up to 5 selectable parameters / For measuring e.g. pH, alkalinity, chlorine, cyanuric acid / Storage of measured values

– Up to 5 selectable parameters
– Bluetooth connection with app
– Exchangeable and lockable cuvette
– 503 nm / 570 nm / 620 nm LED
– Automatic shutdown when inactive
– Many different menu languages
– Light detector: photodiode
– Cuvette: 36 x ø 21 mm / 3.6 x ø 2.1 cm (10 ml)

The post Photometer PCE-CP 04 appeared first on Amet Co.,Ltd.

Photometer PCE-TT 100

Admin Amet — Thu, 18 Mar 2021 09:41:35 +0000

Photometer PCE-TT 100
Transmittance meter for measuring transmission of visible light and UV on glasses

The Photometer PCE-TT 100 is used to measure the transmission of visible light and UV light. For this purpose, the light meter uses a light source and a spectrophotometric sensor. Essentially, the light meter is used to measure the transmission of light through lenses, sunglasses and all other lenses. The light meter is used in glass production but also in opticians to test, for example, the quality of sunglass lenses.

The light meter has a USB interface to connect the PCE-TT 100 to a computer. In the supplied software, a reference measurement is first performed without the glass being placed on it with the light meter. After successful measurement, the user can now place the glass to be measured between the light source and the sensor. With a simple click, the test material is now measured by the light meter.

In the software of the light meter, the percentage deviations from the reference measured value are displayed directly. These include, shading, UV filtering, color of the glass and more. In addition to the numerical display of the measured values, the filtering of the light over the entire spectrum is graphically processed.

– Measurement of the transmission of light
– Spectral analysis
– Measurement of the glass color
– USB interface
– Windows software
– 300 … 1100 nm wavelength in the measuring range
– Haze measurement according to ASTM D1003
– Full spectrum transmittance according to ASTM D1003
– Transmittance according to ASTM E275-93
– CIE 1931 and CIE 1976 chromaticity diagrams

Measurable parameters	Specific wavelength Transmission Average transmittance of visible light Visible smoothing of light Visual color deviation Color (LAB) Color (△ E) Yellowness index All wavelengths of the lights


Wavelength range	300 … 1100 nm 380 … 780 nm
Resolution	0.8 … 1.5 nm
Noise of the sensor	<0.1%
AD resolution	16 bits
Integration time	1 ms … 24 s
Interface	USB
Power supply	Sensor technology: USB Light source: Power supply 5V / 3V
Dimensions	140 x 103 x 234 mm / 5.5 x 4.1 x 9.2 in
Weight	About 3.5 kg / 7.7 lbs
System requirements	Windows XP SP3, Vista, 7, 8, 8.1, 10 2.4 GHz 1 GB RAM 500 MB hard disk space Min. 1024 x 768 Px display resolution

The post Photometer PCE-TT 100 appeared first on Amet Co.,Ltd.

Photometer PCE-CRM 40

Admin Amet — Thu, 18 Mar 2021 09:32:29 +0000

PCE-CRM 40 Photometer
Measurement range up to 150,000 lx / Measures correlated color temperature (CCT) / Standard chromaticity diagrams according to CIE 1931 and CIE 1976 / Indicates wavelength / Presents tristimulus and RGB values / Includes USB interface, cable and PC software

With the photometer or spectrophotometer PCE-CRM 40, important photometric factors in the field of light measurement can be determined. These include the tristimulus values of XYZ, the u´ and v´ color location coordinates according to CIE 1976, and the xy color location coordinates according to CIE 1931. Moreover, further color statistics are measured as absolute values and differences. The user can determine the dominant wavelength within the sensitivity range of the spectrophotometer, which is 360 … 780 nm, as well as the color density (Pe) and the correlated color temperature (CCT) in Kelvin.

Also, the spectrophotometer can measure the illuminance in lux (lx) or foot-candle (fcd) as well as the light flux in lumens (lm) and show the color location in the RGB color space. Due to the ergonomic single-handed operation, the large display, memory, data interface and software, measurements with the spectrophotometer can be carried out quickly and the results are reproducible. The test results can be recorded by means of the software. Its specifications make the spectrophotometer perfectly suitable to classify and optimize lighting installations and conditions in various fields of application.

– Measurement of colour temperature
– Lux measurement up to 150 kLux
– Representation of Tristimulus and RGB
– Ideal for LEDs
– SD memory
– Colour LCD

Measurement functions	Tristimulus values: XYZ Chromaticity: Ev xy, Ev u’v’ Correlated colour temperature: Tc Colour difference: Δ (XYZ), Δ (Evxy ), Δ (Evuv ), ΔE v ΔTc Δuv Chromaticity coordinates: ICE1931 (x, y), ICE1976 (u, v) Dominant wavelength: λd Colour fastness: Pe Luminous flux: Φ, RGB parameter, colour chart, maximum recording and indicator
Measuring range	0.1 … 150,000 lx 0.01 … 15000 fcd Ev: 5 lx / 0.5 fcd or above in four automatically selected ranges (lx or fcd is switchable)
Spectral range	360 … 780 nm
Relative spectral sensitivity	Based on CIE standard X (λ), y (λ), and Z (λ), deviation within 6% (f1 ‘) of CIE spectral luminous efficiency V (λ)
Cosine correction	Ev: < 3% (f2)
Accuracy	Ev : ± 5 % ± 1 digit of displayed value Xy: ± 0.003 lx (at 500 lx, standard A)
Repeatability	Ev : ± 0.5% + 1 digit (2σ) xy: ± 0.0005 (measured at 500 lx, standard A)
Temperature drift	Ev : ± 3% ± 1 digit of the indicated value xy: + -0.003
Response time	0.5 second (for continuous measurement)
Sensor type	Silicon photocell
Interface	USB Slot for SD card
Display	3.2″ color LCD
Operating conditions	-10 … 40°C / 14 … 10°F <85% RH
Storage conditions	-20 … 40°C / -4 … 104°F <85% RH
Power supply	2200-mAh rechargeable lithium-ion battery
Battery life	Min. 12 hours
Dimensions	210 x 80 x 35 mm / 8.2 x 3.1 x 1.37 in
Weight	300 g / < 1 lb including battery

The post Photometer PCE-CRM 40 appeared first on Amet Co.,Ltd.

Photometer PCE-LED 20

Admin Amet — Thu, 18 Mar 2021 09:20:20 +0000

PCE-LED 20 Photometer
Handheld light meter with automatic range selection, displays measuring units in lux or footcandle

PCE-LED 20 is a photometer with an external LED light sensor. The cable of the sensor has an extended length of approx. 1.5 m / 4.9 ft. Different work or production processes require different lighting conditions. In school, office and factory environments, lighting must also meet applicable safety standards. Indoor lighting conditions can be assessed quickly and easily using this meter. The LED light meter or lux meter can display measured values directly on the display. A direct measurement is thus immediately possible. By means of various presets, the functions installed in the device can also be activated or deactivated. These functions include the normal HOLD function, in which the measured value is frozen in the display. In addition, the extreme values as well as the average value can be frozen in the display. Further functions of the LED lux meter are the zero adjustment, the automatic shutdown and the automatic range selection.

Measurements are possible with the LED lux meter in lux or footcandle. The unit has only seven keys, allowing for one-hand operation. This also makes the instrument simple to use. The LED lux meter is a battery-powered handset, making the device portable and ideal for measurements in the field.

The measuring sensor of the LED lux meter has a large exposure area. For convenience, the sensor is located on a coiled cable that can be extended to full length only when needed. A protective cap on the sensor prolongs its life. This protective cap should be placed on the sensor during storage. In addition, the protective cap is required when a zero adjustment is to be performed on the LED lux meter.

– Displays measurements in lux or footcandle
– Battery status indicator
– Battery-saving automatic power off
– Overload indicator
– Wired sensor cable length of 1.5 m / 4.9 ft
– MIN / MAX / AVG / HOLD functions
– 2.5 measurements per second
– Zero adjustment
– Automatic range selection

Measuring ranges	40 / 400 / 4000 / 40000 / 400000 lx 40 / 400 / 4000 / 40000 fc
Measuring units	Lux (lx) or footcandle (fc)
Sensor	Silicone photodiode with built-in filter
Display	Max. representation 3999 Representation of 40000 / 400000 lux and 40000 fc in klux and kfc respectively
Measuring accuracy	± 3% (for a standard incandescent lamp at 2856 K and LED white light) ± 6% for other visible light sources
Overload indication	OL = Overload
Internal memory	99 measured values
Measuring rate	2.5 x per second
Measurable sources of light	LED and any other visible light
Measuring functions	Maximum / Minimum / Average / Hold / Zero Automatic balance Automatic shutdown Automatic range selection
Power supply	3 x 1.5V AAA batteries
Operating conditions	5 … 40°C / 41 … 104°F, 0 … 70% RH
Storage conditions	-10 … 60°C / 14 … 140°F, 0 … 70% RH
For compliance with standards	EMC: EN 61326-1 (2006) IEC 61000-4-2 (2006) IEC 61000-4-3 (2006) + (2007) JIS C1609: 1993 CNS 5519 OSHA § 1915.82
Dimensions	Approx. 162 x 62 x 28 mm / 6.4 x 2.5 x 1.1 in (L x W x H)
Weight	Approx. 250 g /< 1 lb
Length of sensor cable	Approx. 1.5 m / 4.9 ft
Reproducibility	± 3%

The post Photometer PCE-LED 20 appeared first on Amet Co.,Ltd.

Photometer PCE-VDL 16I

Admin Amet — Thu, 18 Mar 2021 09:17:46 +0000

Photometer PCE-VDL 16I
With up to 800 Hz / Temperature, Humidity, Air pressure, Vibration, and Light

The photometers of the PCE-VDL series are available in two versions. The accelerometer PCE-VDL 16I contains sensors for the following physical units: temperature, humidity, air pressure, light and 3-axis acceleration. The max. sampling rate of the acceleration sensor is 800 Hz, the remaining sensors are sampled with max. 1 Hz.

The accelerometer is therefore ideally suited for use in fault diagnosis, stress testing, machine inspection, shock measurements and preventive maintenance.

– 3-axis Acceleration up to 800 Hz

– For temperature, humidity, air pressure and light

– 32 GB SD memory card

– Small design: 86.8 x 44.1 x 22.2 mm / 3.4 x 1.7 x 0.87 in

– Made in Germany

Temperature
Measuring range	-20 … 65°C / -4 … 149°F
Accuracy	± 0.2°C / ± 0.36°F
Resolution	0.01°C / 0.018°F
Max. Sampling rate	1 Hz

Humidity
Measuring range	0 … 100% r.H.
Accuracy	± 1.8% r.H.
Resolution	0.04% r.H.
Max. Sampling rate	1 Hz

Air pressure
Measuring range	10 … 2000 mbar
Accuracy	±2 mbar (750 … 1100 mbar); otherwise ± 4 mbar
Resolution	0.02 mbar
Max. Sampling rate	1 Hz

Light
Measuring range	0.045 … 188,000 Lux
Resolution	0.045 Lux
Max. Sampling rate	1 Hz

3 Axes Acceleration
Measuring range	± 16 g
Accuracy	0.24 g
Resolution	0.00390625 g
Max. Sampling rate	800 Hz

The post Photometer PCE-VDL 16I appeared first on Amet Co.,Ltd.

Photometer PCE-174-ICA incl. ISO Calibration Certificate

Admin Amet — Thu, 18 Mar 2021 09:15:39 +0000

Photometer PCE-174

For measuring light with memory and interface

The PCE-174 photometer with memory for up to 16,000 readings is used for measuring light in industry, agriculture, and research. The illuminometer is also used for determining illumination in the workplace, shop window displays, and by designers. It meets with all international standards within the category for illuminometers. The illuminometer displays measurement results in lux and FootCandle. Please consider that 1 FC is equal to 10.70 lux. The device automatically detects the peak value, when this value is retained for a minimum 10 µs. Thanks to the possibility of selecting the measurement range, the PCE-174 illuminometer converts into a high precision instrument that is easy to use. The illuminometer can also be used by inexperienced personnel. Of course, when light is being measured, the ambient conditions must be taken into consideration. As such, the distance must be fixed and the angle between the illuminometer and the object being measured to obtain result of the highest repeatability.

– Easy to use
– Minimum, maximum and hold functions
– Backlight display
– 3 3/4 digit LCD; with 41 segment graphic bar
– Displays readings in lux or FootCandle
– Battery level indicator
– Auto shut-off
– The Overload indicator shows when the measurement range has been exceeded
– Incl. ISO calibration certificate

Ranges	40.0 / 400.0 / 4000 / lux 40.00 / 400.0 klux 40.00 / 400.0 / 4000 / fc 40.00 kfc
Resolution	0.01 / 0.1 / 1 / 10 / 100 Lux 0.01 / 0.1 / 1 / 10 FootCandle
Accuracy	± 5% of reading ± 10 digits (<10,000 lux) ± 10% of reading ± 10 digits (>10,000 lux)
Repeatability	± 3%
Memory	16.000 readings
Rate of measurement	Between 2 seconds and 9 hours
Overload indicator	OL = Overload
Screen refresh rate	1.5 per second
Operating conditions	0 … 40ºC / 32 … 104°F, 80% r.h.
Display	3¾ digit LCD
Power	9V battery
Dimensions	Device: 203 x 75 x 50 mm / 7.9 x 2.9 x 1.9 in (width x height x depth) Light sensor: 115 x 60 x 20 mm / 4.5 x 2.3 x 0.7 in (width x height x depth) Cable length: 150 cm
Weight	280g / < 1 lb
Standards	Safety: IEC-1010-1; EN 61010-1 EMV: EN 50081-1; EN 50082-1 corresponding with DIN 5031; DIN 5032

The post Photometer PCE-174-ICA incl. ISO Calibration Certificate appeared first on Amet Co.,Ltd.

Photometer PCE-174

Admin Amet — Thu, 18 Mar 2021 09:13:25 +0000

Photometer with data logger PCE-174

for measuring light with memory and interface

The PCE-174 photometer with memory for up to 16,000 readings is used for measuring light in industry, agriculture, and research. The Illuminometer is also used for determining illumination in the workplace, shop window displays, and by designers. It meets with all international standards within the category for Illuminometers. The Illuminometer displays measurement results in lux and FootCandle. Please consider that 1 FC is equal to 10.70 lux. The device automatically detects the peak value, when this value is retained for a minimum 10 µs. Thanks to the possibility of selecting the measurement range, the PCE-174 Illuminometer converts into a high precision instrument that is easy to use. The Illuminometer can also be used by inexperienced personnel. Of course, when light is being measured, the ambient conditions must be taken into consideration. As such, the distance must be fixed and the angle between the Illuminometer and the object being measured to obtain result of the highest repeatability.

Ranges	40.0 / 400.0 / 4000 / lux 40.00 / 400.0 klux 40.00 / 400.0 / 4000 / fc 40.00 kfc
Resolution	0.01 / 0.1 / 1 / 10 / 100 Lux 0.01 / 0.1 / 1 / 10 FootCandle
Accuracy	± 5% of reading ± 10 digits (<10,000 lux) ± 10% of reading ± 10 digits (>10,000 lux)
Repeatability	± 3%
Memory	16.000 readings
Rate of measurement	Between 2 seconds and 9 hours
Overload indicator	OL = Overload
Screen refresh rate	1.5 per second
Operating conditions	0 … 40ºC / 32 … 104°F, 80% r.h.
Display	3¾ digit LCD
Power	9V battery
Dimensions	Device: 203 x 75 x 50 mm / 7.9 x 2.9 x 1.9 in (width x height x depth) Light sensor: 115 x 60 x 20 mm / 4.5 x 2.3 x 0.7 in (width x height x depth) Cable length: 150 cm
Weight	280g / < 1 lb
Standards	Safety: IEC-1010-1; EN 61010-1 EMV: EN 50081-1; EN 50082-1 corresponding with DIN 5031; DIN 5032

The post Photometer PCE-174 appeared first on Amet Co.,Ltd.

Photometer PCE-172-ICA incl. ISO Calibration Certificate

Admin Amet — Thu, 18 Mar 2021 09:11:24 +0000

PCE-172-ICA Photometer incl. ISO calibration certificate
For fast and accurate light measurement

The photometer PCE-172 is used to measure the lighting conditions in industry, agriculture and research. Increasingly, the illuminometer is also used to test lighting in workplaces, in the decoration of shop windows and by designers. It meets international standards for this type of illuminometer.

The illuminometer provides measurement results in Lux and FootCandle units, where 1 fc is equal to 10.70 lux. Calculator for the conversion of lux. The device automatically detects the peak value if this value lasts for at least 10 μs. Due to the selectable measuring range the lux meter PCE-172 has high accuracy. The handling is very easy. This illuminometer can also be used by untrained persons. However, it is always important to take into account in a lux measurement that certain conditions are met. For example, the distance and angle between the illuminometer and the object to be measured should be set as accurately as possible in order to achieve reproducible results.

– Easy to use
– Solid design
– LCD with maximum display reading of 1999
– Measurement units can be displayed in lux or footcandles
– Battery level indicator
– “Overload” indication to warn when measurement range is exceeded
– Incl. ISO Calibration Certificate

Ranges	400.0/4000/lux 40.00/400.0 klux (1 klux = 1000 Lux) 40.00/400.0/4000/fc 40.00 kfc (1 kfc = 1000 fc)
Resolution	0.1/1/10/100 lux 0.01/0.1/1/10 FootCandle
Accuracy	± 5% of reading ±10 digits (<10,000 lux) ± 10% of reading ±10 digits (>10,000 lux)
Repeatability	± 3%
Overload indicator	OL = Overload
Screen refresh rate	1.5 per second
Operating conditions	0 … 40ºC / 32 … 104°F, 80% r.h.
Display	3¾ digit LCD
Power	9V battery
Dimensions	Device: 206 x 95 x 45 mm / 7.9 x 2.9 x 1.9 in (width x height x depth) Light sensor: 115 x 60 x 20 mm / 4.5 x 2.3 x 0.7 in (width x height x depth) Cable length: 95 cm / 59 in
Weight	265 g / < 1 lb
Standards	Safety: IEC-1010-1; EN 61010-1 EMV: EN 50081-1; EN 50082-1 corresponding with DIN 5031; DIN 5032

The post Photometer PCE-172-ICA incl. ISO Calibration Certificate appeared first on Amet Co.,Ltd.