Signal Converter - Amet Co.,Ltd

Voltage Signal Converter PCE-P30H

Admin Amet — Mon, 10 May 2021 04:51:44 +0000

Transmitter with memory / DC input for voltage and current / 4 … 20 mA or 0 … 10 V output / DIN rail mounting / Alarm relay / LC display / Modbus RTU

The PCE-P30H transmitter is used for direct voltages and currents between 12 V … 1000 V DC or currents up to 150 A via separate shunts. The transmitter can convert the measured signals into an analog standard signal. Furthermore, the measured values can be distributed to process control systems via Modbus RTU. The transmitter can optionally be equipped with an SD card or Ethernet. The PCEP30H transmitter is equipped with 2 relays for user alarm.

– SD card memory and internal memory
– DC input for voltage and current via shunts (shunt resistor)
– Output galvanically isolated
– Alarm relay
– Modbus interface
– LC display
– 35 mm mounting rails

The post Voltage Signal Converter PCE-P30H appeared first on Amet Co.,Ltd.

Universal Signal Converter PCE-P30U

Admin Amet — Mon, 10 May 2021 04:50:20 +0000

Signal converter with memory / Universal input / 4 … 20-mA or 0 … 10V Output / DIN rail mounting / Alarm relay / LC display / Sensor supply

The transmitter with memory PCE-P30U has a wide application field. In addition to the conversion of various signals, the transmitter can be used with memory for simple data logging tasks. The PCE-P30U transmitter has an SD card memory and is suitable for both SD and SDHC cards. The transmitter with memory has a universal input. This makes it possible to convert and record standard signals, temperatures, low voltage, etc. The transmitter with memory PCE-P30U is optionally available as output signals 0 … 10V or 4 … 20-mA. The PCE-P30U transmitter has an alarm relay and a Modbus interface in order to be able to use the transmitter for almost all tasks.

– SD card memory and internal memory
– Universal input
– 0 … 20-mA / 0 … 10V output
– Output galvanically isolated
– Alarm relay
– Modbus interface
– LC display
– DIN rail 35 mm / 1.4 in mounting

The post Universal Signal Converter PCE-P30U appeared first on Amet Co.,Ltd.

Current Signal Converter PCE-P30H

Admin Amet — Mon, 10 May 2021 04:49:05 +0000

Transmitter with memory / DC input for voltage and current / 4 … 20 mA or 0 … 10 V output / DIN rail mounting / Alarm relay / LC display / Modbus RTU

Technical Specification
Input	Measuring range	Nominal measuring range	Accuracy class
DC voltage	12 V	-4 … 12 V	0.2
	48 V	-4 … 48 V
	100 V	-4 … 100 V
	250 V	-4 … 250 V
	600 V With additional resistor D5 (see options)	-4 … 600 V	0.2 + accuracy of additional resistor
	1000 V With additional resistor D5 (see options)	-4 … 1000 V
DC power Via shunt		Shunt: -150 … 150 mV	0.2 + accuracy shunt
Interfaces		RS485 (master / slave)
Analog output (galvanically isolated)		4 … 20 mA (max. 500 Ω) 0 … 10 V (< 500 Ohm)
Alarm relay		normally open contact max. 5 A / 30 V DC / 250 V AC
Sensor supply		24 V DC / 30 mA
Power consumption		5 VA
Dimensions		120 x 45 x 100 mm
Display		LCD 2 x 8 characters
Mounting type		35 mm DIN rail
Internal memory		534,336 data records
Max. memory card size		2 GB (FAT / FAT32) (136,512,000 data records)
Supply voltage		85 … 253 V AC / DC 20 … 40 V AC / DC
Ambient conditions		-25 … 55 °C / 25 … 95 % r.H

The post Current Signal Converter PCE-P30H appeared first on Amet Co.,Ltd.

Transmitter PCE-P20H Direct Voltage

Admin Amet — Mon, 10 May 2021 04:47:37 +0000

Transmitter PCE-P20H for direct voltage up to 400 V The PCE-P20H transducer measures DC voltages up to 400 V and converts them into a standard signal. Depending on the version, the PCE-P20H transducer can measure voltages up to 100 V DC, 250 V DC or 400 V DC and output a 4 … 20 mA or 0 … 10 V standard signal. Depending on the model, the supply voltage of the transducers is either 85 … 253 V AC / DC or 20 … 40 V AC / DC. The installation is simple: the voltage transmitter can be easily attached to a 35 mm DIN rail. The standard signals output by the measuring transducer can then be processed with the aid of controllers or screen recorders.

Measurement of direct voltage up to 600 V
Output: 0/4 … 20 mA Standard signal
Various supply voltages
Compact DIN rail mounting
IP 50
Current transformer can be connected
Easy to operate

Technical specifications
Inputs (max)	-1 … 100 V DC -2 … 250 V DC -5 … 400 V DC ± 100 V DC ± 250 V DC ± 600 V DC
Accuracy class	0.2% of the measuring range
Overload	120% of rated voltage
Output	0/4 … 20 mA 0 … 10V
Dimensions	22.5 x 120 x 100 mm / 0.8 x 4.7 x 3.9 in
Assembly	DIN rail mounting 35 mm / 1.3 in
Protection class	IP 50
Supply voltage	85 … 253 V AC / DC 20 … 40 V AC / DC
Power consumption	4 VA
Environmental conditions	-20 … +55 °C / -4 … 131 °F / <95% rh
Installation category	Standard: II 400 V Type: III
Degree of pollution	2
Maximum cable cross section	1.5 mm²

The post Transmitter PCE-P20H Direct Voltage appeared first on Amet Co.,Ltd.

Transmitter PCE-P20H Direct Current

Admin Amet — Mon, 10 May 2021 04:46:13 +0000

Transmitter PCE-P20H for direct current up to 5 A The PCE-P20H transducer measures DC currents up to ± 5 A DC and converts them into a standard signal. Depending on the version, the PCE-P20H transducer can measure 1 A or 5 A DC and outputs a 4 … 20 mA or 0 … 10 V standard signal. Depending on the model, the supply voltage of the transducers is either 85 … 253 V AC / DC or 20 … 40 V AC / DC. The installation is simple: the voltage transmitter can be easily attached to a 35 mm DIN rail. The standard signals output by the measuring transducer can then be processed with the aid of controllers or screen recorders.

Measurement of direct current up to 5 A DC
Output: 0/4 … 20 mA Standard signal
Various supply voltages
Compact DIN rail mounting
IP 50
Current transformer can be connected
Easy to operate

Technical specifications
Inputs (max)	± 1 A DC ± 5 A DC
Accuracy class	0.2% of the measuring range
Output	0/4 … 20 mA 0 … 10V
Dimensions	22.5 x 120 x 100 mm / 0.8 x 4.7 x 3.9 in
Assembly	DIN rail mounting 35 mm / 1.3 in
Protection class	IP 50
Supply voltage	85 … 253 V AC / DC 20 … 40 V AC / DC
Power consumption	4 VA
Environmental conditions	-20 … +55 °C / -4 … 131 °F / <95% rh
Installation category	Standard: II 400 V Type: III
Degree of pollution	2
Maximum cable cross section	1.5 mm²

The post Transmitter PCE-P20H Direct Current appeared first on Amet Co.,Ltd.

Voltage Transmitter PCE-P20Z AC Voltage

Admin Amet — Mon, 10 May 2021 04:44:51 +0000

Voltage converter PCE-P20Z for alternating voltage The PCE-P20Z voltage transmitter measures voltages up to 600 V AC and converts this into a standard signal. Depending on the version, the voltage converter PCE-P20Z can measure voltages up to 250 V AC, 400 V AC or 600 V AC and outputs a 4 … 20 mA standard signal. Depending on the model, the supply voltage of the transmitters is either 85 … 253 V AC / DC or 20 … 40 V AC / DC. The installation is simple: the voltage transmitter can be easily attached to a 35 mm DIN rail. The standard signals output by the measuring transducer can then be processed with the aid of controllers or screen recorders.
– RMS Measurement of voltages up to 600 V AC
– Output: 4 … 20 mA Standard signal
– Various supply voltages
– Compact DIN rail mounting
– IP 50
– Current transformer connectable
– Easy to operate

The post Voltage Transmitter PCE-P20Z AC Voltage appeared first on Amet Co.,Ltd.

Interface Converter PCE-RS232-TTL

Admin Amet — Mon, 10 May 2021 04:43:32 +0000

RS232 TTL interface converter for parallel and crossed connections / high baud rate /
20 mA current consumption / 9 V voltage supply via a power supply unit

The RS232 TTL interface converter is a device-independent solution for converting an RS232 signal into a TTL signal. The RS232 TTL interface converter can also be used to convert a TTL signal into an RS 232 signal. If, for example, the RS232 TTL interface converter is to be used to evaluate the data output of a scale, which communicates via RS232, with the help of a microprocessor, the RS232 TTL interface converter can now be interposed between the transmitter and receiver.

When converting the signals, the RS232 TTL interface converter enables a transmission speed of up to 115,200 baud. The baud rate itself does not have to be set for the RS232 TTL interface converter. This is set by the RS232 TTL interface converter itself. In addition to converting a parallel signal, the signal can be switched to a crossed signal via the RS232 TTL interface converter by setting the switch. Thus the RS232 TTL interface converter can be used universally and quickly.

– for parallel and crossed connections
– transmission speed up to 115,200 baud
– low power consumption
– ready for use after applying the restoration
– 3.5 mm jack and SUB D 9 interface
– to adjust the signal level

Power supply	9 V DC via power pack
Max. current consumption	20 mA
Max. transmission speed	115,200 baud
Interface RS232	SUB D 9 (male)
Interface TTL	3.5 mm jack, 3 pin
Ambient conditions	-10 … +60 °C, <90 % r.H.
	not condensing
Dimensions W x H x D	100 x 35 x 100 mm / 3.9 x 1.3 x 3.9″
Weight	ca. 147 g / 5.1 oz

The post Interface Converter PCE-RS232-TTL appeared first on Amet Co.,Ltd.

Current Transmitter PCE-P20Z Alternating Current

Admin Amet — Mon, 10 May 2021 04:42:11 +0000

Current converter PCE-P20Z for alternating current / 1 A or 5 A input / RMS measurement / 0 … 20 mA or 0 … 10 V output / different supply voltages / DIN rail

The PCE-P20Z current transmitter measures currents and converts them into a standard signal. This makes it possible to precisely determine the most diverse currents with the current transmitter. The current transmitter has an RMS input for up to 5 A AC. The input of the current transmitter is able to perform direct current measurements. However, it is also not a problem to connect current transformers to the current transmitter. This makes it possible to convert currents of several hundred amperes to a signal which can be processed for control technology. The output is 0 … 10 V. The power supply voltage of the current transmitter is 85 … 250 V AC / DC or 20 … 40 V AC / DC.

– RMS Measurement
– Output: 0 … 10 V / 4 … 20 mA
– Various supply voltages
– Compact DIN rail mounting
– 1 A or 5 A input
– For direct or indirect current measurement
– Current transformer connectable
– Easy to operate

The post Current Transmitter PCE-P20Z Alternating Current appeared first on Amet Co.,Ltd.

Current Transformer PCE-LCTB 100/130V (45)

Admin Amet — Mon, 10 May 2021 04:40:53 +0000

Current Transformer PCE-LCTB 100 / 130V (45) Series for measuring alternating currents up to 3200 A

The current transformers of the PCE-LCTB 100 / 130V (45) series are used when alternating currents in circuits are too high to be detected directly by measuring devices. The current transformer converts the primary current into a proportionally reduced secondary current, which can be processed by a measuring device. In addition, the current transformer protects connected measuring devices from excessive voltages. The current transformers of the PCE-LCTB 100 / 130V (45) series can detect primary currents from 400 A to 3200 A depending on the design and convert these into a 1 A or 5 A secondary current. In addition, between the accuracy classes 1 / 0.5 / 0.2 can be selected.

– Primary winding (input): 400 A … 3200 A
– Secondary (output): 1 A / 5 A
– System voltage: max. 720 V
– Accuracy classes: 0.2 / 0.5 / 1
– Frequency: 50 Hz
– IEC / EN 60044-1, BS 3938, IS 2705-1 standards
– Easy installation
– Compact dimensions

The post Current Transformer PCE-LCTB 100/130V (45) appeared first on Amet Co.,Ltd.

Current Transformer PCE-LCTB 140/130V (45)

Admin Amet — Mon, 10 May 2021 04:37:34 +0000

Current transformer PCE-LCTB 140 / 130V (45) Series for measuring alternating currents up to 5000 A

The current transformers of the PCE-LCTB 140 / 130V (45) series are used when alternating currents in circuits are too high to be detected directly by measuring devices. The current transformer converts the primary current into a proportionally reduced secondary current, which can be processed by a measuring device. In addition, the current transformer protects connected measuring devices from excessive voltages. Depending on the design, the current transformers of the PCE-LCTB 140 / 130V (45) series can capture primary currents from 400 A to 5000 A and convert these into a 1 A or 5 A secondary current. In addition, between the accuracy classes 1 / 0.5 / 0.2 can be selected.

– Primary winding (input): 400 A … 5000 A
– secondary (output): 1 A / 5 A
– System voltage: max. 720 V
– Accuracy classes: 0,2 / 0,5 / 1
– Frequency: 50 Hz
– IEC / EN 60044-1, BS 3938, IS 2705-1 standards
– Easy installation
– Compact dimensions

Technical specifications
Primary winding (input)	400 A … 5000 A
Secondary winding (output)	1 A, 5 A
Accuracy classes	0.2 – for laboratory and performance measurements 0.5 – for accurate measurements 1 – for ordinary measurements for analog gauges
depth	45 mm
width	140 mm
Hole diameter	130 x 70 mm
Busbar	70x130mm
Standards	IEC / EN 60044-1, BS 3938, IS 2705-1
Housing	10% glass fiber reinforced polycarbonate, flame retardant according to UV94V-0
connections	2 connections on each side
Heat class	E (to 120 ° C)
System voltage	Max. 720 V
rated capacity	3.75 VA … 20 VA
Ambient temperature	-20 ° C … +45 ° C
Storage temperature	-50 ° C … +80 ° C
Thermal short-circuit current (I th)	40 x In
Dynamic short-circuit current (I dyn)	2.5 x I th
Safety factor	5

The post Current Transformer PCE-LCTB 140/130V (45) appeared first on Amet Co.,Ltd.