Transducer - Amet Co.,Ltd

Universal Signal Converter UMU-100 without relay

Admin Amet — Mon, 10 May 2021 08:00:04 +0000

UMU 100 Universal Signal Converter
Universal Transducer for Pt100 sensors / connection for 2, 3 and 4-thread conductors as well as for thermo elements / additionally for current and voltage inputs

The UMU-100 Uni. Signal Converter is the ideal device for Pt100 sensors as well as for thermo elements (type K, J, etc…). The UMU-100 Uni. Signal Converter can avoid damages in both machines and production plants. The UMU-100 Uni. Signal Converter integrates current and a voltage output signals. The UMU-100 Uni. Signal Converter can optionally have a relay to check for instance a visual alarm when it exceeds the alarm limit. Thanks to the galvanic insulation, power supply does not affect the measured signal, so the UMU-100 Uni. Signal Converter is a safe and accurate measurement device to be used in your company.

View / print user’s manual of the UMU-100 Uni. Signal Converter

– For Pt100 sensors and thermo elements

– Error display

– Universal power supply

– Galvanic insulation (inputs and outputs)

– 2 optional alarm relays

– Voltage and current input

– Voltage and current output

– It can be connected to a display

Technical Specifications
Input	Measurement range	Accuracy
Pt100	-200 °C … 850 °C	±0,2 °C
Linear resistance	0 Ω … 10 kΩ	±0,1Ω
Potentiometer	10 Ω … 100 kΩ	—
Thermo element (depending on the thermo element type)	– 200 °C … 2300 °C	±2 °C
Current (free programming)	0 mA … 20 mA 4 mA … 20 mA	±4 µA
Voltage (free porgraming)	0 V … 1 V DC 0,2 V … 1 V DC 0 V … 5 V 1 V … 5 V 0 V … 10 V 2 V … 10 V	±0 µV
Output	Range	Load
Current	0 mA … 20 mA 4 mA … 20 mA 20 mA … 0 mA 20 mA … 4 mA	maximum 20 mA, 800 Ω, 16 V DC
Voltage	0 V … 1 V DC 0,2 V … 1 V DC 0 V … 5 V 1 V … 5 V 0 V … 10 V 2 V … 10 V 1 V … 0 V DC 1 V … 0,2 V DC 5 V … 0 V 5 V … 1 V 10 V … 0 V 10 V … 2 V	min. 500 kΩ
Relays (close, open, Hold)	Maximum voltage: 250 V RMS Maximum current: 2 A AC o 1 A DC Maximum power (AC): 500 VA
General Specifications
Power supply	24 V AC … 230 V AC / 50 Hz … 60 Hz 24 V DC … 250 V DC
Max. absorbed power	≤2,5 W
Response time (0 % … 90 % / 100 % … 0 %)	Temperature input: ≤1 s Current and voltage input: ≤400 ms
Calibration temperature	20 °C … 28 °C
Max. relative humidity	90 % r.H.
Dimensions with front display	109 x 23,5 x 116 mm
Dimensions without front display	109 x 23,5 x 104 mm
Protection	Case: IP 50 Terminals: IP 20
Weight	175 g
Here you can see the different connection types of the UMU-100 Uni. Signal Converter

The post Universal Signal Converter UMU-100 without relay appeared first on Amet Co.,Ltd.

Temperature Signal Converter UMU-100 without relay

Admin Amet — Mon, 10 May 2021 07:57:11 +0000

UMU 100 Temperature Signal Converter
TemperatureTransducer for Pt100 sensors / connection for 2, 3 and 4-thread conductors as well as for thermo elements / additionally for current and voltage inputs

The UMU-100 Temp. Signal Converter is the ideal device for Pt100 sensors as well as for thermo elements (type K, J, etc…). The UMU-100 Temp. Signal Converter can avoid damages in both machines and production plants. The UMU-100 Temp. Signal Converter integrates current and a voltage output signals. The UMU-100 Temp. Signal Converter can optionally have a relay to check for instance a visual alarm when it exceeds the alarm limit. Thanks to the galvanic insulation, power supply does not affect the measured signal, so the UMU-100 Temp. Signal Converter is a safe and accurate measurement device to be used in your company.

View / print user’s manual of the UMU-100 Temp. Signal Converter

– For Pt100 sensors and thermo elements

– Error display

– Universal power supply

– Galvanic insulation (inputs and outputs)

– 2 optional alarm relays

– Voltage and current input

– Voltage and current output

– It can be connected to a display

Technical Specifications
Input	Measurement range	Accuracy
Pt100	-200 °C … 850 °C	±0,2 °C
Linear resistance	0 Ω … 10 kΩ	±0,1Ω
Potentiometer	10 Ω … 100 kΩ	—
Thermo element (depending on the thermo element type)	– 200 °C … 2300 °C	±2 °C
Current (free programming)	0 mA … 20 mA 4 mA … 20 mA	±4 µA
Voltage (free porgraming)	0 V … 1 V DC 0,2 V … 1 V DC 0 V … 5 V 1 V … 5 V 0 V … 10 V 2 V … 10 V	±0 µV
Output	Range	Load
Current	0 mA … 20 mA 4 mA … 20 mA 20 mA … 0 mA 20 mA … 4 mA	maximum 20 mA, 800 Ω, 16 V DC
Voltage	0 V … 1 V DC 0,2 V … 1 V DC 0 V … 5 V 1 V … 5 V 0 V … 10 V 2 V … 10 V 1 V … 0 V DC 1 V … 0,2 V DC 5 V … 0 V 5 V … 1 V 10 V … 0 V 10 V … 2 V	min. 500 kΩ
Relays (close, open, Hold)	Maximum voltage: 250 V RMS Maximum current: 2 A AC o 1 A DC Maximum power (AC): 500 VA
General Specifications
Power supply	24 V AC … 230 V AC / 50 Hz … 60 Hz 24 V DC … 250 V DC
Max. absorbed power	≤2,5 W
Response time (0 % … 90 % / 100 % … 0 %)	Temperature input: ≤1 s Current and voltage input: ≤400 ms
Calibration temperature	20 °C … 28 °C
Max. relative humidity	90 % r.H.
Dimensions with front display	109 x 23,5 x 116 mm
Dimensions without front display	109 x 23,5 x 104 mm
Protection	Case: IP 50 Terminals: IP 20
Weight	175 g
Here you can see the different connection types of the UMU-100 Temp. Signal Converter

The post Temperature Signal Converter UMU-100 without relay appeared first on Amet Co.,Ltd.

Pressure Transmitter PCE-DMU 40

Admin Amet — Mon, 10 May 2021 06:41:05 +0000

Pressure Transmitter PCE-DMU 40
Pressure Transmitter to 600 Bar / various connections / 0/4 … 20 mA or 0 … 10 V output / Stainless steel membrane

The pressure transducer PCE-DMU 40 can be used for relative and absolute pressure measurements. The pressure transmitter can be used for gases, water as well as fuels and oils. Its metallic stainless steel 1.4435 membrane provides good corrosion resistance in many industrial processes. The modular design of the pressure transmitter allows a combination of process connections, pressure ranges and electrical connection variants and therefore meets almost all requirements of industrial applications. The pressure transmitter has an accuracy of 0.25% of the measuring range. Stainless steel is used as the separating membrane.

– 2 or 3 conductor output
– 0/4 … 20 mA or 0 … 10 V (selectable)
– Smallest measuring range 0 … 100 mBar
– Maximum measuring range 0 … 600 bar
– 0.25% Accuracy of the measuring range
– Stainless steel diaphragm

The post Pressure Transmitter PCE-DMU 40 appeared first on Amet Co.,Ltd.

Thermo Transducer PCE-IR 50-ICA incl. ISO Calibration Certificate

Admin Amet — Mon, 10 May 2021 06:37:16 +0000

Thermo Transducer PCE-IR 50-ICA for non-contact measurement of surface temperatures /
for fixed installation / Delivery includes mounting plate / Measurements up to 500°C (932°F) / For monitoring of machines from a safe distance / incl. ISO Calibration Certificate

With the digital thermometer PCE-IR 50, surface temperatures can measured quickly and easily. The measuring range of the digital thermometer is 0 …500°C / 32 … 932°F. The measured temperature is provided as a 4 … 20-mA standard signal which means that the digital thermometer can be easily integrated into different monitoring systems, including those in different production processes or food storage as well as the monitoring of electronic systems.

The digital thermometer PCE-IR 50 comes with a mounting plate for fixed installation. The digital thermometer must simply be aligned with the heat source to be measured before starting the measurement. The 1.0 m cable of the digital thermometer PCE-IR 5 enables flexible use of the very robust device and even if the user opts for fixed installation, operation in areas which are hard to access will not be a problem at all as installation can be carried out quickly and easily. This type of digital thermometer is recommended when the areas to be measured are under high voltage.

– Measurements from 0 … + 500 °C
– For wall mounting (wall bracket incl.)
– Output signal: 4 … 20 mA
– Easy operation and assembly
– Short response time
– 1 m connection cable
– incl. ISO Calibration Certificate

***ATTENTION*** Our temperature sensors are designed for industrial and laboratory surface temperature measurement ONLY. They are not designed or certified for body temperature measurement or for medical use.

The post Thermo Transducer PCE-IR 50-ICA incl. ISO Calibration Certificate appeared first on Amet Co.,Ltd.

Differential pressure Transmitter PCE-DDMU 10

Admin Amet — Mon, 10 May 2021 06:32:15 +0000

PCE-DDMU 10 differential pressure transducer
Digital differential pressure transducer with analogue output / High accuracy / For differential and relative pressure measurement / Selectable measuring ranges

The PCE-DDMU 10 differential pressure transducer has user selectable pressure ranges, selectable analogue outputs, and an optional LCD display. These differential pressure transducers are supplied via the operating network. You can reconfigure the measuring devices on-site at any time with just a few simple steps. The long-term stability is better than 0.5% based on the full measuring range. The microprocessor-controlled electronics guarantee high accuracy (± 0.5% of the measuring range). In addition to being used in the process (to power a remote display or a regulator) as fixed or wall-mounted units, the differential pressure transducers can also be used as an on-site meter or even mobile. The optional LCD display allows on-site reading. With the help of the automatic zero setting, the measuring devices can be quickly reset on site. The analogue output can also be used in combination with the optional datalogger offered by us in the accessories. This allows you to record the differential pressure readings over a longer period of time, later transfer the stored data to a computer and analyze it there.

– Switchable measuring ranges
– High overload capacity
– Adjustable damping
– Compact design
– Max. ± 0.5% accuracy
– Optional display
– Switching outputs
– Radiated output signal

The post Differential pressure Transmitter PCE-DDMU 10 appeared first on Amet Co.,Ltd.

Thermo Transducer PCE-IR 50

Admin Amet — Mon, 10 May 2021 06:29:32 +0000

Thermo Transducer PCE-IR 50 for non-contact measurement of surface temperatures /
for fixed installation / Delivery includes mounting plate / Measurements up to 500°C (932°F) / For monitoring of machines from a safe distance

– Measurements from 0 … + 500 °C
– For wall mounting (wall bracket incl.)
– Output signal: 4 … 20 mA
– Easy operation and assembly
– Short response time
– 1 m connection cable

The post Thermo Transducer PCE-IR 50 appeared first on Amet Co.,Ltd.

Pressure Transmitter PCE-DMU 10

Admin Amet — Mon, 10 May 2021 06:27:21 +0000

Pressure Transmitter PCE-DMU 10
Pressure Transmitter to 600 Bar / various connections / 0/4 … 20 mA or 0 … 10 V output / Ceramic membrane

The pressure transducer PCE-DMU 10 can be used for relative and absolute pressure measurements. The pressure transmitter can be used for fuels, oils and gases. The ceramic membrane allows a robust application in plant and machine construction, in the field of HVAC technology and also in commercial vehicle technology in the hydraulic sector. The modular design of the pressure transmitter allows a combination of process connections, pressure ranges and electrical connection variants and thus meets almost all requirements of industrial automation. The pressure transmitter has an accuracy of 0.5% of the measuring range.

– 2 or 3 conductor output
– 0/4 … 20 mA or 0 … 10 V (selectable)
– Smallest measuring range 0 … 100 mBar
– Maximum measuring range 0 … 600 bar
– 0.5% Accuracy of the measuring range
– Ceramic diaphragm

Technical Specification Pressure Sensor PCE-DMU 10
Nominal pressure relative in bar	-1 … 0	1	1.6	2.5	4	6	10	16	25	40	60	100	160	250	400
Nominal pressure absolute in bar	–	1	1.6	2.5	4	6	10	16	25	40	60	100	160	250	400
Overpressure in bar	3	3	5	6	12	12	20	50	50	120	120	200	400	400	650
Burst pressure in bar	4	4	7	7.5	15	18	30	70	75	180	150	300	500	750	1000
Vacuum resistance	unlimited
Output signal & power supply				2-wire 4 … 20 mA: 8 … 32 V DC 3-wire 0 … 10 V: 14 … 30 V DC
Load				2-wire: [(UB – UB min) / 0.02 A] Ω 3 wire voltage: 10 kΩ
General Specifications
Accuracy				± 0.5 % FSO
Long-term stability				< ±0.3 % FSO
Measuring rate				1 kHz
Response time				2-wire: <10 ms 3-wire: < 3 ms
Media				Fuels, oils, gases
Temperature ranges				Measuring material: -40 … 125 °C Operating: -40 … 85 °C Storage: -40 … 100 °C
Pressure connection / housing				Stainless steel 1.4301
Seal				FKM
Diaphragm				Ceramic AL2O3
Contact with media parts				Pressure connection, seals, separating diaphragms

The post Pressure Transmitter PCE-DMU 10 appeared first on Amet Co.,Ltd.

Voltage Signal Converter PCE-SCI-U

Admin Amet — Mon, 10 May 2021 06:24:58 +0000

Voltage signal converter PCE-SCI-U
Transmitter Current – Voltage – Temperature Signal converter with more than 100 adjustable combinations / Analogue input signals (0 … 10V, 4 … 20-mA, Pt100, thermocouples) in galvanically isolated analogue standard signals

The transmitter converts an analog input signal into a corresponding analog output signal. The input and output signals from the transmitter are completely galvanically isolated. The input and output range is set via two buttons. The type of adjustment is displayed on an internal LED display.

Over 100 different combinations of input and output, as well as the free scaling within the set ranges, make this transmitter a universally applicable device and save an expensive and laborious storage of different types. Since the input and output ranges can also be set identically, the transmitter can also be used for galvanic decoupling. The transmitter is simply snapped onto a C or DIN rail. The signal converter can be operated with a voltage between 18 … 265V AC / DC.

– Over 100 combinations pre-selected
– Freely scalable
– In less than 5 min. in operation
– Converts analogue input range
– Completely galvanic isolation
– Power supply 18 … 265V AC / DC

Entrance	Measuring range	Accuracy	Overload

Process stream	4 … 20-mA	< 0.3% of rdg.	Max. 25-mA
Process voltage	0 … 10V	< 0.3% of rdg.	Max. 25V DC

Potentiometer 0 … 100%	0 … 500 Ω	< 1% of rdg.
	0 … 20 kΩ

Resistance	0 … 2.5 kΩ	< 1% of rdg.
	0 … 5 kΩ
	0 … 10 kΩ
	0 … 25kΩ
	0 … 50 kΩ
	0 … 100kΩ

NTC (R25 = 10K, β = 3500)	-60 … 90°C / -76 … 194°F	< 1% of rdg.
NTC (44006)	-60 … 90°C / -76 … 194°F
	0 … 90°C / 32 … 194°F

Thermocouple type J	0 … 150°C / 32 … 302°F	< 0.5% of rdg.
	0 … 300°C / 32 … 572°F
	0 … 450°C / 32 … 842°F
	0 … 600°C / 32 … 1112°F
	0 … 800°C / 32 … 1472°F
	0 … 1000°C / 32 … 1832°F
	0 … 1200°C / 32 … 2192°F

Thermocouple type K	0 … 150°C / 32 … 302°F	< 0.5% of rdg.
	0 … 300°C / 32 … 572°F
	0 … 450°C / 32 … 842°F
	0 … 600°C / 32 … 1112°F
	0 … 800°C / 32 … 1472°F
	0 … 1000°C / 32 … 1832°F
	0 … 1350°C / 32 … 2192°F

Thermocouple type N	0 … 150°C / 32 … 302°F	< 1% of rdg.
	0 … 300°C / 32 … 572°F
	0 … 450°C / 32 … 842°F
	0 … 600°C / 32 … 1112°F
	0 … 800°C / 32 … 1472°F
	0 … 1000°C / 32 … 1832°F
	0 … 1300°C / 32 … 2192°F

Thermocouple type E	0 … 150°C / 32 … 302°F	< 0.5% of rdg.
	0 … 300°C / 32 … 572°F
	0 … 450°C / 32 … 842°F
	0 … 600°C / 32 … 1112°F
	0 … 900°C / 32 … 1652°F

Thermocouple type T	0 … 100°C / 32 … 212°F	< 1% of rdg.
	0 … 200°C / 32 … 392°F
	0 … 300°C / 32 … 572°F
	0 … 400°C / 32 … 752°F

Thermocouple type R	0 … 900°C / 32 … 1652°F	< 2% of rdg.
	0 … 1200°C / 32 … 2192°F
	0 … 1500°C / 32 … 2732°F
	0 … 1750°C / 32 … 3182°F

Thermocouple type S	0 … 900°C / 32 … 1652°F	< 2% of rdg.
	0 … 1200°C / 32 … 2192°F
	0 … 1500°C / 32 … 2732°F
	0 … 1750°C / 32 … 3182°F

Pt100 (2- & 3-wire)	-200 … 200°C / -328 … 392°F	< 0.5% of rdg.
	-100 … 100°C / -148 … 212°F
	-50 … 50°C / -58 … 122°F

	0 … 100°C / 32 … 212°F	< 0.3% of rdg.
	0 … 200°C / 32 … 392°F
	0 … 300°C / 32 … 572°F
	0 … 400°C / 32 … 752°F
	0 … 500°C / 32 … 932°F
	0 … 600°C / 32 … 1112°F
	0 … 700°C / 32 … 1292°F

Pt500	-150 … 150°C / -238 … 302°F	< 1% of rdg.
	0 … 300°C / 32 … 572°F
	0 … 630°C / 32 … 1166°F

Pt1000	-150 … 150°C / -238 … 302°F	< 1% of rdg.
	0 … 300°C / 32 … 572°F
	0 … 630°C / 32 … 1166°F

Ni100	-60 … 180°C / -76 … 356°F	< 1% of rdg.
Ni1000	-60 … 180°C / -76 … 356°F	< 1% of rdg.

Temperature drift	150 ppm / °C / °F
Response time	300 ms (0 … 99% of rdg.)
Exit	Active: 4 … 20-mA; Max. Burden 400 Ω
	Passive: 4 … 20-mA; Max. 30V loop voltage
	0 … 10V; Max. Burden 1 kΩ
Attitude	Internal buttons
Display	Internal LED display
Power supply	18 … 265V AC / DC / 45 … 65 Hz
Input	< 1.5W
Connectable cable cross-section	1 … 2.5 mm²
Protection category	2
Isolation	2300 Vrms (max 60 s)
Degree of protection	IP30
Assembly	35 mm DIN rail mounting
Operating conditions	0 … 50°C / 32 … 122°F non-condensing
Storage conditions	-20 … 70°C / -4 … 158 356°F non-condensing
Heating time	Approx. 15 min.
Dimensions	106 x 108 x 22.5 mm / 4.2 x 4.3 x 0.9 in
Weight	About 150 g / < 1 lb

The post Voltage Signal Converter PCE-SCI-U appeared first on Amet Co.,Ltd.

Temperature Signal Converter PCE-SCI-U

Admin Amet — Mon, 10 May 2021 06:23:23 +0000

Temperature signal converter PCE-SCI-U
Transmitter Current – Voltage – Temperature Signal converter with more than 100 adjustable combinations / Analogue input signals (0 … 10V, 4 … 20-mA, Pt100, thermocouples) in galvanically isolated analogue standard signals

The post Temperature Signal Converter PCE-SCI-U appeared first on Amet Co.,Ltd.

Admin Amet — Mon, 10 May 2021 06:13:37 +0000

Signal converter PCE-SCI-U
Transmitter Current – Voltage – Temperature Signal converter with more than 100 adjustable combinations / Analogue input signals (0 … 10V, 4 … 20-mA, Pt100, thermocouples) in galvanically isolated analogue standard signals

Entrance	Measuring range	Accuracy	Overload

Process stream	4 … 20-mA	< 0.3% of rdg.	Max. 25-mA
Process voltage	0 … 10V	< 0.3% of rdg.	Max. 25V DC

Potentiometer 0 … 100%	0 … 500 Ω	< 1% of rdg.
	0 … 20 kΩ

Resistance	0 … 2.5 kΩ	< 1% of rdg.
	0 … 5 kΩ
	0 … 10 kΩ
	0 … 25kΩ
	0 … 50 kΩ
	0 … 100kΩ

NTC (R25 = 10K, β = 3500)	-60 … 90°C / -76 … 194°F	< 1% of rdg.
NTC (44006)	-60 … 90°C / -76 … 194°F
	0 … 90°C / 32 … 194°F

Thermocouple type J	0 … 150°C / 32 … 302°F	< 0.5% of rdg.
	0 … 300°C / 32 … 572°F
	0 … 450°C / 32 … 842°F
	0 … 600°C / 32 … 1112°F
	0 … 800°C / 32 … 1472°F
	0 … 1000°C / 32 … 1832°F
	0 … 1200°C / 32 … 2192°F

Thermocouple type K	0 … 150°C / 32 … 302°F	< 0.5% of rdg.
	0 … 300°C / 32 … 572°F
	0 … 450°C / 32 … 842°F
	0 … 600°C / 32 … 1112°F
	0 … 800°C / 32 … 1472°F
	0 … 1000°C / 32 … 1832°F
	0 … 1350°C / 32 … 2192°F

Thermocouple type N	0 … 150°C / 32 … 302°F	< 1% of rdg.
	0 … 300°C / 32 … 572°F
	0 … 450°C / 32 … 842°F
	0 … 600°C / 32 … 1112°F
	0 … 800°C / 32 … 1472°F
	0 … 1000°C / 32 … 1832°F
	0 … 1300°C / 32 … 2192°F

Thermocouple type E	0 … 150°C / 32 … 302°F	< 0.5% of rdg.
	0 … 300°C / 32 … 572°F
	0 … 450°C / 32 … 842°F
	0 … 600°C / 32 … 1112°F
	0 … 900°C / 32 … 1652°F

Thermocouple type T	0 … 100°C / 32 … 212°F	< 1% of rdg.
	0 … 200°C / 32 … 392°F
	0 … 300°C / 32 … 572°F
	0 … 400°C / 32 … 752°F

Thermocouple type R	0 … 900°C / 32 … 1652°F	< 2% of rdg.
	0 … 1200°C / 32 … 2192°F
	0 … 1500°C / 32 … 2732°F
	0 … 1750°C / 32 … 3182°F

Thermocouple type S	0 … 900°C / 32 … 1652°F	< 2% of rdg.
	0 … 1200°C / 32 … 2192°F
	0 … 1500°C / 32 … 2732°F
	0 … 1750°C / 32 … 3182°F

Pt100 (2- & 3-wire)	-200 … 200°C / -328 … 392°F	< 0.5% of rdg.
	-100 … 100°C / -148 … 212°F
	-50 … 50°C / -58 … 122°F

	0 … 100°C / 32 … 212°F	< 0.3% of rdg.
	0 … 200°C / 32 … 392°F
	0 … 300°C / 32 … 572°F
	0 … 400°C / 32 … 752°F
	0 … 500°C / 32 … 932°F
	0 … 600°C / 32 … 1112°F
	0 … 700°C / 32 … 1292°F

Pt500	-150 … 150°C / -238 … 302°F	< 1% of rdg.
	0 … 300°C / 32 … 572°F
	0 … 630°C / 32 … 1166°F

Pt1000	-150 … 150°C / -238 … 302°F	< 1% of rdg.
	0 … 300°C / 32 … 572°F
	0 … 630°C / 32 … 1166°F

Ni100	-60 … 180°C / -76 … 356°F	< 1% of rdg.
Ni1000	-60 … 180°C / -76 … 356°F	< 1% of rdg.

Temperature drift	150 ppm / °C / °F
Response time	300 ms (0 … 99% of rdg.)
Exit	Active: 4 … 20-mA; Max. Burden 400 Ω
	Passive: 4 … 20-mA; Max. 30V loop voltage
	0 … 10V; Max. Burden 1 kΩ
Attitude	Internal buttons
Display	Internal LED display
Power supply	18 … 265V AC / DC / 45 … 65 Hz
Input	< 1.5W
Connectable cable cross-section	1 … 2.5 mm²
Protection category	2
Isolation	2300 Vrms (max 60 s)
Degree of protection	IP30
Assembly	35 mm DIN rail mounting
Operating conditions	0 … 50°C / 32 … 122°F non-condensing
Storage conditions	-20 … 70°C / -4 … 158 356°F non-condensing
Heating time	Approx. 15 min.
Dimensions	106 x 108 x 22.5 mm / 4.2 x 4.3 x 0.9 in
Weight	About 150 g / < 1 lb

The post appeared first on Amet Co.,Ltd.

Measuring range	0 … +500 °C / 32 … 932°F
Measurement accuracy	± 1 °C or 1% of the measured value, higher value applies
Repeatability	± 0.5 °C or 0.5% of the measured value, higher value applies
Optical resolution	15:1
Output signal	4 … 20 mA
Spectral sensitivity	8 … 14 µm
Emissivity	fixed at 0.95
Power supply	24 VDC
Load	900 Ohm
Protection class	IP65
Material	stainless steel
Operating temperature	0 … +70 °C
Relative humidity	10 … 95 %
Measurement time	T90: 240 ms
Accessories	mounting plate included in delivery
Cable length	1 m
Dimensions	Ø18 x 103 mm

Measuring ranges	Adjustable by the user	Max. static pressure
1.6 mBar 4.0 mBar 10 mBar 40 mBar 250 mBar 10000 mBar ± 1.6 mBar ± 4 mBar ± 10 mBar ± 40 mBar ± 250 mBar ± 1000 mBar	1.0 mBar 2.5 mBar 6 mbar 25 mbar 60/160 mbar 400/600 mbar	200 mbar 200 mbar 200 mbar 345 mbar 1000 mbar 3000 mbar 200 mbar 200 mbar 200 mbar 345 mbar 1000 mbar 3000 mbar
Media	Gases Air
Exit	3-wire switchable: 0 … 10 V / 0 … 20 mA 0 … 5 V / 4 … 20 mA 2-wire: 4 … 20-mA
Response time	<100 ms Damping adjustable via potentiometer 0 … 5000 ms
Long-term stability	≤ ± 1% FSO / year PN <6 mbar ≤ ± 0.5% FSO / year for PN ≥ 6 mbar
Measuring rate	12.5 Hz
Switching output	For 3-wire version: 2 x 230V / 2A change-over relays For 2- Wire variant: 2 x PNP Open collector output
Temperature error	≤ ± 0.5% FSO / 10 K (typ.) For PN <6 mbar ≤ ± 0.3% FSO / 10 K (typ.) For PN ≥ 6 mbar
Operating conditions	Medium: 0 … 50°C / 32 … 122°F Environment: 0 … 50°C / 32 … 122°F
Storage conditions	-10 … 70°C / 14 … 158°F
Short circuit resistance	Permanent
Reverse polarity protection	No damage but no function
EMC	EMC Directive: 2014/30 / EU Emitted interference and Immunity to EN 61326
Pressure connection Standard Optional	Brass Ø 6.6 x 11 (for flexible hoses with Ø 6) Ø 4.4 x 10 (for flexible hoses with Ø 4)
Casing	SECTION
Sensor	Ceramic, silicon
Media contacting parts	Pressure connection, PVC / silicone, sensor
Display (optional)	2-line LC display Display accuracy : 0.1% + 1 digit
Additional functions with display	– Parameterization of the switching outputs – Selection of the unit – Selection of the transfer characteristic (linear, radiated) – Cut-off function (radiated output signal) – Min./max . Value display – Recalibration – Autozero function – Factory setting
Power supply	3 conductors: 19 … 32V 2 conductors: 11 .. 32VWith automatic zeroing: 24 … 32V
Current consumption	3-wire: 30-mA 2-wire: 22-mA
Weight	About 200 g / < 1 lb
Protection	IP 54
Dimensions	152 x 68.5 x 50 mm / 6 x 2.7 x 2 in

Measuring range	0 … +500 °C / 32 … 932°F
Measurement accuracy	± 1 °C or 1% of the measured value, higher value applies
Repeatability	± 0.5 °C or 0.5% of the measured value, higher value applies
Optical resolution	15:1
Output signal	4 … 20 mA
Spectral sensitivity	8 … 14 µm
Emissivity	fixed at 0.95
Power supply	24 VDC
Load	900 Ohm
Protection class	IP65
Material	stainless steel
Operating temperature	0 … +70 °C
Relative humidity	10 … 95 %
Measurement time	T90: 240 ms
Accessories	mounting plate included in delivery
Cable length	1 m
Dimensions	Ø18 x 103 mm