Vibration Recorder - Amet Co.,Ltd

Vibration Recorder Laser Shaft Alignment Tool PCE-TU 3

Admin Amet — Tue, 04 May 2021 09:00:03 +0000

PCE-TU 3 Vibration Recorder Laser Shaft Alignment Tool
Prevent premature failure of couplings, bearings and mechanical seals

PCE-TU 3 is a vibration recorder laser shaft alignment tool designed to aid in aligning rotating equipment (e.g., electric motor and direct-coupled machine) shafts to prevent premature failure of couplings, bearings and mechanical seals. PCE-TU 3 also helps you detect and correct soft foot to avoid costly downtime.

The PCE-TU 3 alignment tool features two red laser sensors that can be fixed to a shaft. This class 2 laser system has a typical wavelength of 670 nm, < 1 mW capacity, and maximum radiation energy of 0.1 mJ per impulse. The class 2 laser meets applicable ANSI, BS 4803, IEC 825 and US FDA requirements.

– Features two red class 2 laser sensors
– Maximum 10 m / 32.8 ft distance between sensors
– Horizontal alignment in every position from 60° … 360°
– Vertical alignment
– Auto sweep mode
– Adjustable tolerances
– Tilt (incline) measurement
– Thermal growth
– Spacer simulation
– PDF reports
– USB data transfer (optional Bluetooth adapter)
– 2 GB internal memory

The post Vibration Recorder Laser Shaft Alignment Tool PCE-TU 3 appeared first on Amet Co.,Ltd.

Human Vibration Recorder with Hand-Arm and Whole-Body Sensors PCE-VM 31-HAWB

Admin Amet — Tue, 04 May 2021 08:59:00 +0000

The PCE-VM 31-HAWB Human Vibration Recorder is designed for measuring human vibration at the workplace. The Vibration Meter can calculate hand-arm vibration measurements according to ISO 5349 and whole-body vibration measurements according to ISO 2631. Each sensor consists of a triaxial Vibration Meter that captures acceleration, velocity, and displacement measurements. In addition to human vibration measurements, the Vibration Meter or Vibration Analyzer can measure the vibrations of machines. The Vibration Analyzer also supports TEDS, which means that it can detect and identify TEDS-capable sensors automatically. Overall, the device comes with 4 independent measuring channels. The measured data can be displayed as interval, running or maximum RMS (MTVV), as well as estimated vibration dose value (eVDV), vector sum, peak, and maximum peak. The acceleration can also be displayed as FTT with up to 125 lines. The internal flash memory of the Vibration Analyzer can store up to 10,000 measurements or up to 1,000 FTTs, each with date, time, and a comment. The measured data can also be transferred to a PC via the USB 2.0 interface.

– For tri-axial measurement (Xh, Yh and Zh axes) of hand-arm and whole-body human vibration
– For hand-arm vibration syndrome (HAVS) and carpal tunnel syndrome risk assessment, measuring exposure action values (EAVs) and exposure limited values (ELVs), and regulation compliance
– Velocity, acceleration, displacement
– 3 channel FFT
– TEDS support
– Flash memory for up to 10,000 readings
– USB interface
– Compact design
– Easy to use – ISO 8041 calibration certificate option available (see accessories)

The post Human Vibration Recorder with Hand-Arm and Whole-Body Sensors PCE-VM 31-HAWB appeared first on Amet Co.,Ltd.

Vibration Recorder PCE-VMS 504

Admin Amet — Tue, 04 May 2021 08:57:49 +0000

PCE-VMS 504 wireless Vibration Recorder with external vibration sensors/ to measure acceleration, speed, offset, and temperature / optional extension: max. 60 dispatchers per base with max. 6 base stations (360 dispatchers)

The wireless PCE-VMS 504 Vibration Recorder detects vibration within an acceleration range of up to 30 g and a frequency range between 5 and 10 KHz. The wireless Vibration Meter features external vibration sensors which measure vibrations on machines and transfer those measurements wirelessly to a receiving unit. The sensors can be easily attached to a machine due to their magnetic base. Not only do the sensors measure vibrations and transfer the measurements to a computer, but the sensors also recognize temperatures between -20 °C and +120 °C. While operating, the communicating server of the PCE-VMS 504 Vibration Meter sends the measured parameters straight to a receiving unit, which then uploads the received data straight to a server. If the system cannot establish a connection with the server, the measurements are temporarily saved on the receiving unit until a server-connection could be re-established. A main advantage of the wireless Vibration Meter is that there are no wires, so that the set-up of the system is very quick and easy, and the wireless Vibration Meter is able to record vibrations over a longer period of time.

– Wireless communication via ZigBee
– Frequency range between 5 Hz and 10 kHz
– Wireless transferring Piezo sensors
– Large radius of coverage
– Can be extended at any time

– Dispatcher IP 65 protected
– Temperature measurement up to 120 °C
– Data memory (receiving base) 128 MB
– Long battery lifetime
– No extensive wiring required

The post Vibration Recorder PCE-VMS 504 appeared first on Amet Co.,Ltd.

Vibration Recorder PCE-VM 40C

Admin Amet — Tue, 04 May 2021 08:56:37 +0000

Vibration Recorder PCE-VM 40C

Triaxial acceleration meter / Mobile version with NiMH battery / FFT analysis

IP 64 protection / Internal memory for up to 100,000 readings / SMS alert functionality

The PCE-VM 40C Vibration Recorder or Accelerometer was designed for vibration and shock metering on buildings, bridges, towers, and other artificial structures. The Accelerometer measures vibrations in accordance to DIN 4150-3, BS 7385 and SN 640312A standards. With its internal memory for up to 100,000 readings, the PCE-VM 40C Accelerometer can determine the effects of construction sites, traffic, or industrial processing on buildings over a long period of time. You can choose between time-based and event-based recording, as well as between recording of short-time and long-time vibrations. It is also possible to set threshold levels which trigger an alarm signal when exceeded. With the built-in GSM module (optional), the device can send you SMS notifications once the alarm is triggered.

The Accelerometer is very easy to use and can be configured for different applications in no time. The measured data can easily be viewed on the integrated display of the device. Here you can see the vibration speed in all 3 directions. The Accelerometer has an integrated NiMH battery which makes it suited for mobile use on-site. A mains / AC adaptor for stationary use is also included in delivery.

– Triaxial acceleration meter
– In accordance with BS 7385 standard
– Integrated NiMH battery
– FFT analysis, XYZ and vector sum display
– SMS alarm notifications via GSM (optional)

– Internal memory for up to 100,000 readings
– Mains / AC adaptor included in delivery
– Easy to use
– Threshold function

The post Vibration Recorder PCE-VM 40C appeared first on Amet Co.,Ltd.

Human Vibration Recorder with Whole-Body Sensor PCE-VM 31-WB

Admin Amet — Tue, 04 May 2021 08:55:23 +0000

The PCE-VM 31-HA Human Vibration Recorder or Analyzer is designed for measuring human vibration at the workplace. The Vibration Meter can calculate hand-arm vibration measurements according to ISO 5349 and whole-body vibration measurements according to ISO 2631. In addition to human vibration measurements, the Vibration Analyzer can measure the vibrations of machines. The Vibration Analyzer also supports TEDS, which means that it can detect and identify TEDS-capable sensors automatically. Overall, the device comes with 4 independent measuring channels. The measured data can be displayed as interval, running or maximum RMS (MTVV), as well as estimated vibration dose value (eVDV), vector sum, peak, and maximum peak. The acceleration can also be displayed as FTT with up to 125 lines. The internal flash memory of the Vibration Analyzer can store up to 10,000 measurements or up to 1,000 FTTs, each with date, time, and a comment. The measured data can also be transferred to a PC via the USB 2.0 interface.

Includes whole-body sensor only – hand-arm sensor sold separately (see accessories)

The post Human Vibration Recorder with Whole-Body Sensor PCE-VM 31-WB appeared first on Amet Co.,Ltd.

Human Vibration Recorder with Hand-Arm Sensor PCE-VM 31-HA

Admin Amet — Tue, 04 May 2021 08:54:11 +0000

The PCE-VM 31-HA Human Vibration Recorder is designed for measuring human vibration at the workplace. The Vibration Meter can calculate hand-arm vibration measurements according to ISO 5349 and whole-body vibration measurements according to ISO 2631. In addition to human vibration measurements, the Vibration Meter or Vibration Analyzer can measure the vibrations of machines. The Vibration Analyzer also supports TEDS, which means that it can detect and identify TEDS-capable sensors automatically. Overall, the device comes with 4 independent measuring channels. The measured data can be displayed as interval, running or maximum RMS (MTVV), as well as estimated vibration dose value (eVDV), vector sum, peak, and maximum peak. The acceleration can also be displayed as FTT with up to 125 lines. The internal flash memory of the Vibration Analyzer can store up to 10,000 measurements or up to 1,000 FTTs, each with date, time, and a comment. The measured data can also be transferred to a PC via the USB 2.0 interface.

Includes hand-arm sensor only – whole-body sensor sold separately (see accessories)

The post Human Vibration Recorder with Hand-Arm Sensor PCE-VM 31-HA appeared first on Amet Co.,Ltd.

Human Vibration Recorder without Sensors PCE-VM 31

Admin Amet — Tue, 04 May 2021 08:52:53 +0000

The PCE-VM 31 Human Vibration Recorder is designed for measuring human vibration at the workplace. The Vibration Meter can calculate hand-arm vibration measurements according to ISO 5349 and whole-body vibration measurements according to ISO 2631. In addition to human vibration measurements, the Vibration Meter or Vibration Analyzer can measure the vibrations of machines. The Vibration Analyzer also supports TEDS, which means that it can detect and identify TEDS-capable sensors automatically. Overall, the device comes with 4 independent measuring channels. The measured data can be displayed as interval, running or maximum RMS (MTVV), as well as estimated vibration dose value (eVDV), vector sum, peak, and maximum peak. The acceleration can also be displayed as FTT with up to 125 lines. The internal flash memory of the Vibration Analyzer can store up to 10,000 measurements or up to 1,000 FTTs, each with date, time, and a comment. The measured data can also be transferred to a PC via the USB 2.0 interface.

Sensors not included – sold separately (see accessories)

Technical specifications

Measuring range	Sensor with 1 mV/(m/s²)	Sensor with 10 mV/(m/s²)
Acceleration	1100 m/s² / 3609 ft/s²	110 m/s² / 361 ft/s²
Velocity	100 mm/s … 10,000 mm/s 4.0 in/s … 394.0 in/s (1 kHz/1 Hz)	10 mm/s … 1,000 mm/s 0.4 in/s … 39.4 in/s (1 kHz/1 Hz)
Displacement (Peak)	250 µm … 15,000 µm 0.01 in … 0.6 in (5 Hz/250 Hz)	25 µm … 1,500 µm 0.001 in … 0.06 in (5 Hz/250 Hz)
Display resolution (1 / 10 mV/(m/s²))
Acceleration	0.01 m/s² / 0.4 in/s²
Velocity	0.1 mm/s / 0.004 in/s
Displacement	1 µm / 4 x 10^-5 in
Linearity range	> 75 dB for ±6 % error
Noise	< 0.003 m/s² / 0.12 in/s²
Inputs	4 Low-Power-IEPE inputs; 0.7 mA / 17 V; TEDS support, IEEE1451.4, Template 25
Sensor sensibility	0.8 – 120 mV/(m/s²)
Display units human vibration (acceleration)	Interval RMS vector sum max. running RMS (MTVV) vibration dose value (VDV)
Display units acceleration, velocity, displacement	running RMS maximum RMS vector sum peak value maximum peak value
Filters	Weighting filters: Wb, Wc, Wd, Wh, Wj, Wk, Wm
	Unweighted: 6.3 – 1259 Hz (H/A) / 0.4 – 100 Hz (G/K)
	Acceleration: 0.1 – 2000 Hz / 1 – 1000 Hz
	Velocity: 1 – 100 Hz / 2 – 1000 Hz / 10 – 1000 Hz
	Displacement: 5 – 250 Hz
Frequency analysis (FFT)	125 lines for X/Y/Z, peak spectrum of acceleration, 3 – 240 / 6 – 480 / 12 – 960 / 24 – 1920 Hz
Data memory	Flash, 10,000 measurements, 1,000 FFts, each with date, time and comment
Display	OLED, 128 x 160 pixels, coloured
Interface	USB 2.0, full speed, CDC-mode (virtual COM port), via cable VM2x-USB
Batteries	3 x 1.5 V AAA batteries or accumulators (LR03 or HR03)
Environmental conditions	-20° C … +60° C / -4° F … +140° F < 95 % RH
Approx. dimensions	125 mm x 65 mm x 27 mm 4.9 in x 2.6 in x 1.1 in (without connectors)
Approx. weight	140 g / 0.31 lbs

***Sensors not included – sold separately (see accessories)***

The post Human Vibration Recorder without Sensors PCE-VM 31 appeared first on Amet Co.,Ltd.

Vibration Recorder PCE-VM 5000-ICA Incl. ISO Calibration Certificate

Admin Amet — Tue, 04 May 2021 08:51:28 +0000

Vibration Recorder PCE-VM 5000
display and storage of acceleration, speed and displacement measurement of vibrations /
4-channel vibration Vibration Meter indicates 4 channels of simultaneous vibration metering through remote vibration sensors / incl. ISO Calibration Certificate

The 4-channel PCE-VM 5000 Vibration Recorder is especially designed for precise measurements of vibrations. Despite the fact that the 4-channel vibration Vibration Meter is a complex and sensitive device, its hardened design enables operation for many years. The PCE-VM 5000 Vibration Meter indicates a large, lighted LCD display for four channels of simultaneous vibration measurements from remote vibration sensors. The Vibration Meter measures in a frequency range of 10 Hz to 1 KHz for speed, acceleration, and displacement. The captured data values are saved on a SD memory card where you can choose between automatic and manual data storage. By means of the SD memory card the data can be transferred afterwards to a computer in order to analyze it in an excel file. With the PCE-VM 5000 Vibration Meter you can choose between different measurement units: for acceleration, the unit m/s², g, and ft/s² are able to be selected; for speed, mm/s, cm/s and inches/s can be used; and for the displacement, mm and inches can be choosen.

– Acceleration, speed, and displacement
– Long-lasting battery
– Precise measurement
– Large, LCD display with background lights
– Different measurement units
– Data storage on SD card
– Frequency range 10 Hz … 1 KHz
– Evaluation of data at computer
– incl. ISO Calibration Certificate

Acceleration
Unit: m/s²	Range: 0.5 … 199.9 m/s² Accuracy: ± (5 % rdg + 5 d) @ 80 and 160 Hz
Unit: g	Range: 0.05 … 20.39 g Accuracy: ± (5 % rdg + 5 d) @ 80 and 160 Hz
Unit: ft/s²	Range: 2 … 656 ft/s² Accuracy: ± (5 % rdg + 5 d) @ 80 and 160 Hz
Calibration point	50 m/s² (160 Hz)
Speed
Unit: mm/s	Range: 0.5 … 199.9 mm/s Accuracy: ± (5 % rdg + 5 d) @ 80 and 160 Hz
Unit: cm/s	Range: 0.05 … 19.99 cm/s Accuracy: ± (5 % rdg + 5 d) @ 80 and 160 Hz
Unit: inch/s	Range: 0.02 … 7.89 inch/s Accuracy: ± (5 % rdg + 5 d) @ 80 and 160 Hz
Calibration point	50 mm/s (160 Hz)
Expansion
Unit: mm	Range: 1.999 mm Accuracy: ± (5 % rdg + 5 d) @ 80 and 160 Hz
Unit: inch	Range: 0.078 inch Accuracy: ± (5 % rdg + 5 d) @ 80 and 160 Hz
Calibration point	0.141 mm (160 Hz)
Display	82 x 61 mm / 3.22 in x 2.4″ LCD with background light
No. of channels	4 input channels
Measurement types	Speed, acceleration, expansion
Unit of measurement	Acceleration: m/s², g, ft/s² Speed: mm/s, cm/s, inches/s Expansion: mm, inches
Frequency range	10 Hz … 1 kHz
Peak hold	Acceleration, Speed: Measures / updates the max. value Expansion: Measures / updates the p-p value
Max hold	Acceleration, Speed: Measures / updates the max. value Expansion: Measures / updates the p-p value
Max hold reset	Push-button activation
Zero function	Push-button activation for acceleration-(RMS) measurements
Datalogger sampling rate	Automatic: 1 … 3,600 seconds Manually: at the push of a button
Memory card	SD memory card (1 … 16 GB)
Data hold function	Holds displayed measured value
Audio output point	Mini stereo jack socket Max. voltage: 2 V Output resistance: 100 Ohm
Operating temperature	0 … +50 °C / 32 … 122 °F
Operating humidity	85 % r.H. max.
Power supply	8 x 1.5 V AA batteries or 9 V power adapter
Power consumption	NiMH battery 3 x 2700 mAh
Operating / charging time	Normal operation: ca. 12 mA dc With the background lighting switched off and the data logger switched on: ca. 35 mA dc
Weight	Meter: 515 g / / 1.1 lbs Probe with cable and magnetic base: 99 g / 0.2 lbs
Dimensions	Main unit: 203 x 76 x 38 mm / 8.0 x 3.0 x 1.5″ Probe: 16 x 37 mm / 0.6 in x 1.5″ in diameter Cable length: 1.2 m / 3.9 ft

The post Vibration Recorder PCE-VM 5000-ICA Incl. ISO Calibration Certificate appeared first on Amet Co.,Ltd.

Vibration Recorder PCE-VM 20-ICA incl. ISO Calibration Certificate

Admin Amet — Tue, 04 May 2021 08:48:53 +0000

Vibration Recorder PCE-VM 20-ICA incl. ISO Calibration Certificate
Vibration measuring device for vibration measurement on machines / Direct evaluation according to DIN ISO 10816 / Various measurement modes / Real-time FFT analysis / Route option for fast acquisition of measuring points

The vibration recorder PCE-VM 20 is a compact device for the direct evaluation of the vibration behavior of a machine. The device can measure and display various vibration parameters, such as vibration acceleration, vibration velocity or vibration displacement. Thanks to the integrated real-time FFT analysis, the condition of a machine can be analyzed and determined during the measurement.

The PCE-VM 20 vibration meter can evaluate and display signals from IEPE standard piezoelectric vibration sensors as well as piezoelectric vibration sensors with charge output.

– Real-time FFT analysis
– Robust housing
– Many vibration parameters
– Direct evaluation according to DIN ISO 10816
– Integrated LiPo battery
– incl. ISO Calibration Certificate

The post Vibration Recorder PCE-VM 20-ICA incl. ISO Calibration Certificate appeared first on Amet Co.,Ltd.

Vibration Recorder PCE-VM 5000

Admin Amet — Tue, 04 May 2021 08:47:44 +0000

The post Vibration Recorder PCE-VM 5000 appeared first on Amet Co.,Ltd.

Communication type	ZigBee (with PCE-VMS 501) ethernet, glass fibre cable, wireless (with server)
Frequency band	2.4 GHz
Interfaces	Ethernet 2.0 IEEE802.3, TCP/IP, 10/100baseT
Data storage capacity	128 MB
Power supply	220 VAC/110 VAC or POE
Operating temperature	-20 °C … +50 °C -4 °F … 122 °F
Dimensions	250 mm x 210 mm x 100 mm 9.8 in x 8.3 in x 3.9 in
Weight	2400 g / 5.3 lbs

Dispatch range	max. 100 m / 328 ft in industrial environment (130 m / 426.5 ft in free field)
Acceleration range	up to 300 m/s²
Frequency range	5 Hz … 10 kHz
Resonance frequency	16 kHz
Linearity	1 %
Sensitivity for parameters that are not relevant for measurement	≤5 %
Electric insulation	<108 Ω
Load limit	1000 g / 2.2 lbs
Measuring parameters	Acceleration, speed, temperature, offset
Dispatch interval	min. 1 minute per sensor 1 sensor at 1 box = 1 minute 3 sensors at one box= 3 minutes
A/D conversion	24 Bit
Measurable range for wave form	max. 512 kB
Frequency lines	800, 1600, 3200, 6400
Measurement range for temperature	-20 … +120 °C -4 °F … 248 °F
Screw thread	6 mm
Material of enclosure	Bottom 316 L stainless steel, top aluminum alloy
Power supply	1 x 3,6 V lithium battery (ER 34335)
Battery lifetime	1 year, depending on transfer interval
Dimensions	height: 80 mm / 3.1 in diameter: 40 mm / 1.6 in
Weight	217 g / 0.5 lbs
Protection class	IP 65
Operation temperature	-30 °C … +70 °C / 86 °F … 158 °F (Surface temperature up to 125 °C / 257 °F)

Vibration acceleration	0 … 200 m/s², RMS and Peak-Peak
Vibration velocity	0 … 200 mm/s, RMS
Vibration displacement	0 … 2000 μm, Peak-Peak


Accuracy vibration	± 5%


Operating modes	Vibration, temperature, speed
Representable measured variables	Frequency
	Vibration acceleration
	Vibration velocity
	Vibration
	FFT spectrum


Units	Metric
	Hz, mm/s², mm/s, μm, RPM, Hz


Interface	USB 2.0
Storage	4GB micro SD card
Battery life	Up to 8 h continuous operation
Battery type	Lithium polymer
Display	128 x 160 pixel color LCD
Environmental conditions	-10 … 55°C / 14 … 131°F
	≤ 80% RH not condensing
Dimensions	132 x 70 x 33 mm / 5.2 x 2.8 x 1.3 in (L x W x D)
Weight	About 150 g / < 1 lb

Handset: must not be exposed to strong vibrations, magnetic fields, corrosive media or dust

Technical data for the vibration sensor
Sensitivity	100 mV / g
Frequency response (± 3 dB)	0.5 … 15,000 Hz
Frequency response (± 10%)	2.0 … 10,000 Hz
Dynamic range	± 50 g, peak
Power supply (IEPE)	18 … 30V DC
Constant current source	2 … 10-mA
Spectral noise at 10 Hz	14 μg / √Hz