– Graphic display
– Data logger on Micro-SD card
– Measurement for 1 and 3 phases
– Temperature measurement with thermocouple
– Voltage measurement 10V … 600V AC RMS
– Current measurement 5 … 2000 A AC RMS
– Current clamp opening 50 mm
– Harmonic distortion up to the 50th order
– incl. ISO Calibration Certificate

– Graphic display
– Data logger on Micro-SD card
– Measurement for 1 and 3 phases
– Temperature measurement with thermocouple
– Voltage measurement 10V … 600V AC RMS
– Current measurement 5 … 2000 A AC RMS
– Current clamp opening 50 mm
– Harmonic distortion up to the 50th order

The voltmeter is the ideal measuring instrument to measure leakage currents. This is made possible by the extensive measuring range of the multimeter. Also, current measurements up to 150 A AC can be made with the multimeter. To test supply lines with a current of up to 150 A, the multimeter for the corresponding cable cross-section can be opened up to 30 mm.

In addition to the current measurement, the multimeter can also measure voltages up to 600V directly. Because of the current and voltage measurement, the multimeter is the perfect measuring instrument to carry out measurements and analyzes on, for example, three-phase networks. For example, the continuity test can be used to find an incorrect wiring in sub-distribution boxes.

– 30 mm current clamp opening
– Temperature measurement with thermocouple type K
– Current measurement up to 150 A AC
– Covers a wide range of measurements
– Voltage measurement up to 600V AC / DC RMS
– Transport bag for mobile use
– incl. ISO Calibration Certificate

The voltmeter is a versatile measuring instrument for the determination of currents, voltages and many other electrical quantities. With a current clamp opening of 40 mm / 1.6 in, even cables with a larger diameter can be tested with the digital multimeter. Thus, with the digital multimeter, current measurements of up to 1000 A AC / DC are possible.

The user can perform frequency measurements with this voltmeter. This ensures contactless frequency measurement with the digital multimeter. Thus, the digital multimeter is a useful addition to the equipment of an electrician.

– Current clamp opening 40 mm / 1.6 in
– Backlit LCD display
– Automatic shutdown
– Ready for operation after switching on
– Extensive measuring functions
– Measuring range is selected automatically
– incl. ISO Calibration Certificate

– Apparent / active / reactive power
– Measurement up to the 20th harmonic
– “Not Connected Voltage” function
– Inrush current measurement
– Current measurement up to 1000 A AC
– Bluetooth interface

– 30 mm current clamp opening
– Temperature measurement with thermocouple type K
– Current measurement up to 150 A AC
– Covers a wide range of measurements
– Voltage measurement up to 600V AC / DC RMS
– Transport bag for mobile use

This voltmeter was developed for the indirect measurement of AC/DC currents with high resolution. A non-contact voltage tester function and a torch/flashlight for illuminating the measuring point have also been integrated into this clamp meter. The small dimensions of this amperage clamp enable it to be used in places that are difficult to access.

The large, illuminated display of these measuring clamps ensures very good readability even in dark locations, such as in switch cabinets and cable ducts. The non-contact voltage tester function not only supports you in the detection of dangerous voltage potentials, but also gives you a precise tool for determining cable break positions in cable reels, extension cables and appliance connection cables.

– Combination device of LAN tester and multimeter
– LCD
– Checks Lankabel and patch fields
– Continuity test and diode test possible
– Overload indicator
– Short circuit display