Weather Station - Amet Co.,Ltd

Domatic Slate Weather Station

Admin Amet — Thu, 06 May 2021 02:49:31 +0000

Thermo Barometer Domatic Slate
Weather station for indoor use (barometer, thermometer, hygrometer) / made from carved out and painted slate / modern design / round displays

Analog thermo barometer for indoor use (barometer, thermometer, hygrometer), made from carved out and painted slate. The analog Thermo Barometer Domatic Slate comes with a modern design and three well-readable round displays. Through changes in the air pressure, statements about further weather conditions can be made. This is also indicated by three symbols in the barometer. The analog thermo barometer should delight the viewer with not only weather data but also with an attractive appearance. This Thermo Barometer is built from the best materials and contains accurate measurement elements. Please note that this thermo barometer can only be placed indoors. In dry areas such as winter gardens, terraces and greenhouses, this thermo barometer can also be used.

– for indoor use (barometer, thermometer, hygrometer)
– made from carved out and painted slate
– three round displays
– easy to read
– for hanging

Technical Specifications
Temperature	-10 … +50 °C
Humidity	0 … 100 % r.h.
Barometer	980 … 1040 hPa
Display diameter	80 / 80 / 80 mm
Dimensions	370 x 142 mm
Weight	960 g

The post Domatic Slate Weather Station appeared first on Amet Co.,Ltd.

Weather Station / Wind Speed Alarm PCE-WSAC 50

Admin Amet — Thu, 06 May 2021 02:47:40 +0000

PCE-WSAC 50 Weather Station
Pre-alarm and full alarm / Optional RS-485 modbus interface / Displays current wind speed and average wind speed of last 2 and 5 minutes

PCE-WSAC 50 is a weather station that displays the current wind speed as well as the average wind speed of the last 2 and 5 minutes. A pre-alarm and full alarm can be activated based on preset values. If wind speeds are higher than the preset values, a pre-alarm is first applied before the full alarm is issued. Both alarms are delivered visually and audibly. If the pre-alarm is triggered, a yellow LED will flash on the front of the unit and a beep will periodically be emitted as a warning tone. If the full alarm is triggered, a red LED will flash on the front of the unit and a beep will continuously be emitted.

PCE-WSAC 50 allows measurement of the slightest of wind movements. This wind speed meter alarm controller is used for a variety of wind monitoring applications in industries such as construction, mining, renewable energy and manufacturing. If necessary, a relay can also be connected to the controller.

***Sensors sold separately***

– Pre-alarm and full alarm with visual and audible warnings
– Allows measurement of the slightest wind movements
– Optional RS-485 modbus interface for data communication
– Bright, easy-to-read LED display
– Simple to use
– Incl. ISO Calibration Certificate

***Sensors sold separately***

The post Weather Station / Wind Speed Alarm PCE-WSAC 50 appeared first on Amet Co.,Ltd.

Weather Station PCE-WS RS485

Admin Amet — Thu, 06 May 2021 02:46:18 +0000

Robust Weather Station for fixed installation / various output signals /

for wind warning systems, building services and building automation

The Weather Station impresses with its compact design and various output signals. The Weather Station can be used for applications in warning technology, building automation and home technology. Depending on the Weather Station, a 4 … 20 mA, 0 … 10 V, Modbus or pulse output is available. The Weather Station is designed as a star, so that operation independent of the wind direction is guaranteed.

The Weather Station is made of robust plastic and is therefore resistant to rust and corrosion. The Weather Station is also protected to IP65. The design of the Weather Station also ensures that it is particularly protected against high-frequency and electromagnetic radiation. The measuring range extends between 2.62 … 164.04 ft/s, 0.8 … 50 m / s. The Weather Station has a 65 ft, 20 m connection cable as standard. A stainless steel mounting kit for the Weather Station is optionally available.

– Robust PA plastic housing

– IP 65 protection

– mA, V, pulse or Modbus output

– Long lifetime

– Direct measurement of wind speed

– Measurement from 2.62 ft/s, 0.8 m / s

The post Weather Station PCE-WS RS485 appeared first on Amet Co.,Ltd.

Weather Station PCE-WS CR

Admin Amet — Thu, 06 May 2021 02:44:40 +0000

Robust Weather Station for fixed installation / various output signals /
for wind warning systems, building services and building automation

The Weather Station impresses with its compact design and various output signals. The wind speed meter can be used for applications in warning technology, building automation and home technology. Depending on the wind speed meter, a 4 … 20 mA, 0 … 10 V, Modbus or pulse output is available. The wind speed meter is designed as a star, so that operation independent of the wind direction is guaranteed.

The wind speed meter is made of robust plastic and is therefore resistant to rust and corrosion. The wind speed meter is also protected to IP65. The design of the wind speed meter also ensures that it is particularly protected against high-frequency and electromagnetic radiation. The measuring range extends between 2.62 … 164.04 ft/s, 0.8 … 50 m / s. The wind speed meter has a 65 ft, 20 m connection cable as standard. A stainless steel mounting kit for the wind speed meter is optionally available.

– Robust PA plastic housing
– IP 65 protection
– mA, V, pulse or Modbus output
– Long lifetime
– Direct measurement of wind speed
– Measurement from 2.62 ft/s, 0.8 m/s

The post Weather Station PCE-WS CR appeared first on Amet Co.,Ltd.

Weather Station PCE-FWS 20N-2

Admin Amet — Thu, 06 May 2021 02:43:28 +0000

Radio weather station to determine the wind direction, wind speed, temperature, relative humidity and rainfall / Adjustable alarm functions / USB interface / Analysis software / Solar module and batteries for powering the transmitter / Transmission frequency: 868 MHz

This wireless weather station is a true all-rounder that leaves little to be desired. Whether at home or in the office, the wireless weather station will delight the operator with its versatility. This weather station allows accurate recording of wind direction, wind force, temperature, relative humidity and rainfall. This is just a small selection of the possibilities this weather station offers. In addition, the operator has the possibility to activate various alarm functions on the wireless weather station (wind speed, air pressure, …). With the help of the values displayed on the weather station, the user can, amongst other things, decide which clothes are appropriate, or whether the garden must be watered, and much more. The weather data is sent up to 100 meters by radio signal to the main station.

The wireless weather station is equipped with the latest technology in weather analysis. The transmitter is powered by a solar panel and the batteries. With the newly developed touch screen display, the weather data can be easily accessed directly from the wireless weather station by simply tapping on the display. With the USB interface and the included USB cable, the weather data can be transmitted directly from the wireless weather station to a PC or laptop. These data are all provided with a time / date stamp in order to be able to assign them even after a longer period of time. Here the weather data can be stored indefinitely. The supplied analysis software then allows you to observe and compare the weather over a longer period of time using graphs and graphics. Everything the user needs for commissioning and use of this wireless weather station is included in the delivery.

– Software for analyzing the stored data

– Backlit 7 inch touch screen

– Weather forecast function

– Automatic time setting thanks to DCF

– Adjustable alarms when the measured value is exceeded

– Wind direction and wind speed

– Temperature and humidity display

– Solar panel on the outdoor unit to the supply

The post Weather Station PCE-FWS 20N-2 appeared first on Amet Co.,Ltd.

Weather Station PCE-FWS 20N-1

Admin Amet — Thu, 06 May 2021 02:38:13 +0000

– Software for analyzing the stored data

– Backlit 7 inch touch screen

– Weather forecast function

– Automatic time setting thanks to DCF

– Adjustable alarms when the measured value is exceeded

– Wind direction and wind speed

– Temperature and humidity display

– Solar panel on the outdoor unit to the supply

The post Weather Station PCE-FWS 20N-1 appeared first on Amet Co.,Ltd.

Wind Direction Station PCE-WV A

Admin Amet — Thu, 06 May 2021 02:35:33 +0000

Robust Wind Direction Station for fixed installation / 4 … 20 mA output /

for wind warning systems, building services and building automation

The Wind Direction Station was developed to measure the wind direction in the industrial environment. This Wind Direction Station can be connected to data loggers, process control systems, displays. A 4 … 20 mA signal is available as an output signal on the Wind Direction Station. The Wind Direction Station has no dead center in the north and measures the wind direction from 0 … 360 °. In order to protect the air flow meter from external weather influences, it is protected according to IP65.

To connect the Wind Direction Station to an evaluation, a 20 m cable is installed on the wind direction sensor. The Wind Direction Station can be used for irrigation control, automation in greenhouses, on solar trackers, cable cars in ski areas, cranes, wind turbines, weather stations and wherever the wind or wind direction must be observed precisely.

– Robust PA plastic housing

– IP 65 protection

– 4 … 20 mA output

– Long lifetime

– 0 … 360 ° measuring range

– Measurement from 2.62 ft/s, 0.8 m / s

The post Wind Direction Station PCE-WV A appeared first on Amet Co.,Ltd.

Weather Station PCE-WS A

Admin Amet — Thu, 06 May 2021 02:29:07 +0000

Robust Weather Station for fixed installation / various output signals /

for wind warning systems, building services and building automation

– Robust PA plastic housing

– IP 65 protection

– mA, V, pulse or Modbus output

– Long lifetime

– Direct measurement of wind speed

– Measurement from 2.62 ft/s, 0.8 m / s

The post Weather Station PCE-WS A appeared first on Amet Co.,Ltd.

Weather Station PCE-FWS 20N

Admin Amet — Thu, 06 May 2021 02:20:41 +0000

– Software for analyzing the stored data

– Backlit 7 inch touch screen

– Weather forecast function

– Automatic time setting thanks to DCF

– Adjustable alarms when the measured value is exceeded

– Wind direction and wind speed

– Temperature and humidity display

– Solar panel on the outdoor unit to the supply

Inside
Measuring function
Air temperature
Measuring range	Resolution	Accuracy
0 … +50 °C	0.1	–
32 … 122 °F

Measuring function
Rel. Humidity
Measuring range	Resolution	Accuracy
1 … 99 %	1 %	–

Measuring function
Air Pressure
Measuring function	Resolution	Accuracy
300 … 1100 hPa	0.1 hPa	± 3 hPa
8.85 … 32.5 inHg	0.01 inHg

Measuring interval: 48 seconds
Alarm time: 120 seconds

Outside
Measuring function
Air temperature
Measuring range	Resolution	Accuracy
-40 … 60 °C	0.1	±1 °C
-40 … 140 °F

Measuring function
Rel. Humidity
Measuring range	Resolution	Accuracy
1 … 99 %	1 %	±4 % within 20 … 80 %
		±6 % within 20 … 80 %

Measuring function
Rainfall
Measuring range	Resolution	Accuracy
0 … 9999 mm	0.3 mm at <1000 mm	±6 %
	1 mm at >1000 mm

Measuring function
Wind speed
Measuring range	Resolution	Accuracy
0 … 50 m/s	0.1	±1 m/s at <5 m/s
0 … 100 mph		±10 % at >5 m/s

Reception range 100 m, 300 feet
Frequency: 868 MHz (Europe)
Measuring interval: 48 seconds
Protection class: IP X3

Other specifications
7 inch touchscreen
Backlit illuminated display
Setting the time	manual and automatic (DCF 77)
Power supply display	3 x 1.5 V AA
Power supply outdoor module	2 x 1.5 V AA
Dimensions display	230 x 150 mm
Dimensions outdoor module	400 x 117 mm
Weight display	ca. 551 g
Weight outdoor module	ca. 545 g

Display
– Indoor temperature in Celsius or Fahrenheit
– Outside temperature in Celsius or Fahrenheit
– Indoor humidity
– Outdoor humidity
– Air pressure gauge in inHg or hPa
– Absolute or relative air pressure display selectable
– Precipitation indication in mm or inch
– Rain gauge 1 hour, 24 hours, 1 week, 1 month, since the last reset
– Dew point temperature display
– Weather forecast
– Weather forecast trend display
– Storm warning
– Display of weather data
– Programmable alarms for different weather conditions
– Storage of the minimum and maximum values of the received weather data
– Wind speed in mph, km/h, m/s, knots or Beaufort selectable
– Wind direction indicator
– Wind chill temperature display (sensed temperature)
– LED backlight
– Battery life of the weather station about 1 to 2 years
– Radio clock
– 12 or 24 hours display
– Calendar
– Time zone adjustable
– Power saving function
– The weather station display can be used as a wall model or stand model
– Permanent adjustment of weather data and radio clock signal
– Ring memory for 4080 complete weather records
(adjustable storage interval 5 to 240 min)

Adjustable alarm functions on the weather station
– Humidity inside max. alarm
– Temperature inside max. alarm
– Humidity outside max. alarm
– Temperature outside max. alarm
– Wind chill max. alarm
– Dew point max. alarm
– Air pressure max. alarm
– Wind speed max. alarm
– Wind gust speed max. alarm
– 1 hour of precipitation max. alarm
– 24 hrs precipitation max. alarm
– Humidity inside min. alarm
– Temperature inside min. alarm
– Humidity outside min. alarm
– Temperature outside min. alarm
– Wind chill min. alarm of the weather station
– Dew point min. alarm
– Air pressure min. alarm

Storable measured values via the weather station (with time / date)
– 1 hour of precipitation max.
– 24 hours of precipitation max.
– Week precipitation max.
– Month precipitation max.
– Humidity inside min.
– Temperature inside min.
– Humidity of the weather station outside min.
– Temperature outside min.
– Wind chill temperature min.
– Dew point temperatur min.
– Weather station air pressure min.
– Humidity inside max.
– Temperature inside max.
– Humidity of the weather station outside max.
– Temperature of the weather station outside max.
– Wind chill temperature max.
– Dew point temperature max.
– Air pressure max.
– Wind speed max.
– Wind direction
– Gusts of wind speed max.

The post Weather Station PCE-FWS 20N appeared first on Amet Co.,Ltd.

Weather Station PCE-WS V

Admin Amet — Thu, 06 May 2021 02:03:32 +0000

Robust Weather Station for fixed installation / various output signals /

for wind warning systems, building services and building automation

– Robust PA plastic housing

– IP 65 protection

– mA, V, pulse or Modbus output

– Long lifetime

– Direct measurement of wind speed

– Measurement from 2.62 ft/s, 0.8 m / s

The post Weather Station PCE-WS V appeared first on Amet Co.,Ltd.

Measuring range	0.8 m/s … 50 m/s, 2.62 … 164.04 ft/s
Measurement from	≤0.8 m/s, ≤2.62 ft/s
Output	Adjustable relay
Accuracy	<4 m/s: ± 0.27 m/s, <13.12 ft/s: ± 0.89 ft/s
	>4 m/s: ± 3 %, >13.12 ft/s: ± 3%
Operating voltage	12 … 24 V DC
Operating temperature range	-20 … +80 °C, -4 … +185 ° F at ≤95 % rel. humidity
Maximum wind speed	55 m/s, 180.45 ft/s, 123 mph
Electrical connection	20 m, 65 ft connection cable
Protection class	IP65