Wind Speed Alarm / Wind Alarm Controller - Amet Co.,Ltd

Wind Speed Alarm / Wind Alarm Controller KWS 1

Admin Amet — Thu, 06 May 2021 03:39:46 +0000

Simple wind meter with pulse output / With wind direction sensor /
suitable for PCE-WL1 und PCE-WL2

Wind meter KWS1 for, for example, PCE-WL windlogger. Simple cross-hair anemometer with pulse output and wind direction sensor

– Basic wind transmitter
– 3 m connection cable
– Easy assembly
– Compatible with PCE-WL 1 and PCE-WL 2

Technical Specification
Output wind speed	0 … 100 Hz
Measuring range wind speed	0.9 … 40 m/s
Accuracy wind speed	± 0.5 m/s or 5 % v. M
Load wind speed	max. 60 m/s short-term
Contact load	10 VA, max. 42 V DC, max. 0.4 A
Measuring range wind direction	5 … 355 °
Sensor Wind direction	0 … 1 kOhm
Assembly	Pipe mounting 31 mm
Environmental temperature	-25 … +60 °C (with ice-free)
Cable	3 m; LiYY 4 x 0.5 mm²
Protection class	IP54
Dimensions	418 x 30mm
Weight	ca. 1000g

The post Wind Speed Alarm / Wind Alarm Controller KWS 1 appeared first on Amet Co.,Ltd.

Wind Speed Alarm / Wind Alarm Controller CWG 1

Admin Amet — Thu, 06 May 2021 03:37:45 +0000

Wind Sensor CWG 1
Compact wind sensor with 4 … 20 mA output

Compact wind sensor CWG1 for weather monitoring. Basic cup anemometer with 4 … 20 mA output.

– Basic wind transmitter
– 12 m connection cable
– Easy assembly
– 4 … 20 mA output

Output	4 … 20 mA
Measurement reading range	0 … 50 m/s
Accuracy	± 0,5 m/s or 3 % v.M
Load	Max. 80 m/s temporary
Load	500 Ohm at 15 V operating voltage
Power supply	9 … 30 V AC / DC max. 50 mA
Assembly	on mast tube
Heating	max. 24 V DC/AC, max. 20 W
Ambient temperature	-25 … +60°C (in ice-free conditions)
Cable	12 m; LiYY 6 x 0,25 mm²
Protection class	IP54
Weight	approx. 500g

The post Wind Speed Alarm / Wind Alarm Controller CWG 1 appeared first on Amet Co.,Ltd.

Wind Speed Alarm / Wind Alarm Controller KWG2

Admin Amet — Thu, 06 May 2021 03:35:17 +0000

Wind Sensor KWG2
Basic wind transmitter with impulse output / heating

Basic wind transmitter for monitoring tasks. Ideal measuring transducers for basic requirements and appropriate for cost effective solutions. The technology focuses on the basic requirements necessary and to ensure longevity, all moving and supporting parts are manufactured using durable synthetic materials.

– Basic wind transmitter
– 3 m connection cable
– Easy assembly
– 0 … 10 V output

Technical Datas
Output	0 … 10 V
Measurement reading range	0.9 … 40 m/s
Accuracy	± 0.5 m/s or 5 % v. M
Load	max. 60 m/s (temporary)
Contact Load	10 VA, max. 42 V DC, max. 0,4 A
Assembly	mounting bracket
Heating	max. 24 V DC/AC, max. 1 A
Ambient temperature	25 … +60 °C (in ice-free conditions)
Cable (selectable)	3 m; LiYY 4 x 0,5 mm²
Protection class	IP54
Dimensions	Ø 134 x 160 mm
Weight	ca. 300g

The post Wind Speed Alarm / Wind Alarm Controller KWG2 appeared first on Amet Co.,Ltd.

Wind Speed Alarm PCE-WSAC 50W 24-ICA incl. ISO Calibration Certificate

Admin Amet — Thu, 06 May 2021 03:32:45 +0000

PCE-WSAC 50W 24-ICA Wind speed alarm incl. ISO calibration certificate
Radio Wind Warning System / Wind Monitoring on Construction Cranes / 4 … 20-mA analog output / Power supply 110 … 230V AC or +24V DC

The wind speed alarm PCE-WSAC 50W is primarily used to measure and monitor the wind load on cranes or wind turbines. Furthermore, the wind situation can be measured and analyzed before commissioning a wind turbine. The wind speed alarm PCE-WSAC 50W is equipped with alarm relay for a pre-alarm or main alarm.

Due to the high measuring range of up to 50 m / s of the wind speed alarm , stormy gusts can also be monitored. The radio range of the wind speed alarm is in the open field up to 750 m / 2500 ft in the free frequency band of 2.4 GHz. When installing the display of the wind alarm PCE-WSAC 50W in buildings, a range of up to 60 m / 200 ft can be achieved for the wind sensor. Due to the integrated 4 … 20-mA analogue output of the wind alarm display, the measured data can also be transferred to other controllers for evaluation.

– Robust plastic housing
– Units: km / h, mph, m / s
– 4 … 20-mA analog output
– 128 x 64 pixel LC display
– Alarm relay
– Measuring range up to 180 km / h
– Durable stainless steel ball bearings
– Ambient temperature -20 … 70°C / -4 … 158°F
– Radio transmission
– Incl. ISO calibration certificate

Display of wind speed alarm PCE-WSAC 50W 24
Entrance	Pulse, analog (4 … 20-mA) or radio
Radio	IEEE 802.15.4 ISM 2.4 GHz
Units	km / h, mph, m / s
Power supply for sensors	+15V DC
Analog output	4 … 20-mA
Maximum input impedance	500 Ω
Resolution of the analog output	10 bits
Accuracy of the analog output	± 1.5%
Alarm relay	Max. 250V AC, 8 A
Display	Backlit 128 x 64 pixel LC display
Casing	Robust plastic housing
Protection class	IP65
Dimensions	145 x 95 x 125 mm / 5.7 x 3.7 x 4.9 in
Weight	650 g / 1.4 lbs

Sensor of wind speed alarm PCE-WSAC 50W
Measuring range	4 … 180 km / h
Minimum start speed	8 km / h
Accuracy	± 1 km / h in the range 4 … 15 km / h
	± 3% in the range 16 … 180 km / h
Power supply	Battery mono cell D 1.5V DC
Power consumption	Approx. 0.3 W with 1.5V DC power supply
Housing material	PA + FG
Ball-bearing	Stainless steel X65Cr13
Holder	Stainless steel AISI 304
Weight (with standard bracket)	About 680 g / 1.5 lbs
Weight with self-leveling bracket	About 900 g / 2 lbs
Dimensions	320 x 110 x 100 mm / 12.6 x 4.3 x 3.9 in
Storage temperature	-35 … 70°C / -31 … 158°F
Ambient temperature	-20 … 70°C / -4 … 158°F
Protection	IP65

The post Wind Speed Alarm PCE-WSAC 50W 24-ICA incl. ISO Calibration Certificate appeared first on Amet Co.,Ltd.

Wind Speed Alarm Controller PCE-WSAC 50W 230-ICA incl ISO calibration cert.

Admin Amet — Thu, 06 May 2021 03:30:46 +0000

PCE-WSAC 50W 230 Wind Speed Alarm Controller incl ISO calibration certificate
Radio anemometer warning system / Wind monitoring on construction cranes / 4 … 20-mA analog output / Power supply 110 … 230V AC

Wind Speed Alarm Controller PCE-WSAC 50W 230 is primarily used to measure and monitor the wind load on cranes or wind turbines. Furthermore, the wind situation can be measured and analyzed before commissioning a wind turbine. The Wind Speed Alarm Controller PCE-WSAC 50W 230 is equipped with alarm relay for a pre-alarm or main alarm.

Due to the high measuring range of up to 50 m / s of the wind speed alarm controller, stormy gusts can also be monitored. The radio range of the wind speed alarm controller is in the open field up to 750 m / 2500 ft in the free frequency band of 2.4 GHz. When installing the display of the wind speed alarm controller PCE-WSAC 50W 230 in buildings, a range of up to 60 m / 200 ft can be achieved for the wind sensor. Due to the integrated 4 … 20-mA analogue output of the wind alarm display, the measured data can also be transferred to other controllers for evaluation.

Display of the Wind Speed Alarm Controller PCE-WSAC 50W 230
Input	Pulse, analog (4 … 20-mA) or radio
Radio	IEEE 802.15.4 ISM 2.4 GHz
Units	km / h, mph, m / s
Power supply for sensors	+15V DC
Analog output	4 … 20-mA
Maximum input impedance	500 Ω
Resolution of the analog output	10 bits
Accuracy of the analog output	± 1.5%
Alarm relay	Max. 250V AC, 8 A
Display	Backlit 128 x 64 pixel LC display
Casing	Robust plastic housing
Protection class	IP65
Dimensions	145 x 95 x 125 mm / 5.7 x 3.7 x 4.9 in
Weight	650 g / 1.4 lbs

Sensor of the Wind Speed Alarm Controller PCE-WSAC 50W 230
Measuring range	4 … 180 km / h
Minimum start speed	8 km / h
Accuracy	± 1 km / h in the range 4 … 15 km / h
	± 3% in the range 16 … 180 km / h
Power supply	Battery mono cell D 1.5V DC
Power consumption	approx. 0.3 W with 1.5V DC power supply
Housing material	PA + FG
Ball-bearing	Stainless steel X65Cr13
Holder	Stainless steel AISI 304
Weight (with standard bracket)	about 680 g / 1.5 lbs
Geicht with self-leveling bracket	about 900 g / 2 lbs
Dimensions	320 x 110 x 100 mm / 12.6 x 4.3 x 3.9 in
Storage temperature	-35 … 70°C / -31 …158°F
Ambient temperature	-20 … 70°C / -4 … 158°F
Protection	IP65

The post Wind Speed Alarm Controller PCE-WSAC 50W 230-ICA incl ISO calibration cert. appeared first on Amet Co.,Ltd.

Wind Speed Alarm Controller PCE-WSAC 50W 24

Admin Amet — Thu, 06 May 2021 03:29:00 +0000

PCE-WSAC 50W 24 Wind speed alarm controller
Radio Wind Warning System / Wind Monitoring on Construction Cranes / 4 … 20-mA analog output / Power supply 110 … 230V AC or +24V DC

The wind speed alarm controller PCE-WSAC 50W is primarily used to measure and monitor the wind load on cranes or wind turbines. Furthermore, the wind situation can be measured and analyzed before commissioning a wind turbine. The wind speed alarm controller PCE-WSAC 50W is equipped with alarm relay for a pre-alarm or main alarm.

Due to the high measuring range of up to 50 m / s of the wind speed alarm controller, stormy gusts can also be monitored. The radio range of the wind speed alarm controller is in the open field up to 750 m / 2500 ft in the free frequency band of 2.4 GHz. When installing the display of the wind alarm PCE-WSAC 50W in buildings, a range of up to 60 m / 200 ft can be achieved for the wind sensor. Due to the integrated 4 … 20-mA analogue output of the wind alarm display, the measured data can also be transferred to other controllers for evaluation.

Display of wind speed alarm controller PCE-WSAC 50W 24
Entrance	Pulse, analog (4 … 20-mA) or radio
Radio	IEEE 802.15.4 ISM 2.4 GHz
Units	km / h, mph, m / s
Power supply for sensors	+15V DC
Analog output	4 … 20-mA
Maximum input impedance	500 Ω
Resolution of the analog output	10 bits
Accuracy of the analog output	± 1.5%
Alarm relay	Max. 250V AC, 8 A
Display	Backlit 128 x 64 pixel LC display
Casing	Robust plastic housing
Protection class	IP65
Dimensions	145 x 95 x 125 mm / 5.7 x 3.7 x 4.9 in
Weight	650 g / 1.4 lbs

Sensor of wind speed alarm controller PCE-WSAC 50W
Measuring range	4 … 180 km / h
Minimum start speed	8 km / h
Accuracy	± 1 km / h in the range 4 … 15 km / h
	± 3% in the range 16 … 180 km / h
Power supply	Battery mono cell D 1.5V DC
Power consumption	Approx. 0.3 W with 1.5V DC power supply
Housing material	PA + FG
Ball-bearing	Stainless steel X65Cr13
Holder	Stainless steel AISI 304
Weight (with standard bracket)	About 680 g / 1.5 lbs
Weight with self-leveling bracket	About 900 g / 2 lbs
Dimensions	320 x 110 x 100 mm / 12.6 x 4.3 x 3.9 in
Storage temperature	-35 … 70°C / -31 … 158°F
Ambient temperature	-20 … 70°C / -4 … 158°F
Protection	IP65

The post Wind Speed Alarm Controller PCE-WSAC 50W 24 appeared first on Amet Co.,Ltd.

Wind Speed Alarm Controller PCE-WSAC 50W 230

Admin Amet — Thu, 06 May 2021 03:26:52 +0000

PCE-WSAC 50W 230 Wind Speed Alarm Controller
Radio anemometer warning system / Wind monitoring on construction cranes / 4 … 20-mA analog output / Power supply 110 … 230V AC

Wind speed alarm controller PCE-WSAC 50W 230 is primarily used to measure and monitor the wind load on cranes or wind turbines. Furthermore, the wind situation can be measured and analyzed before commissioning a wind turbine. The wind speed alarm controller PCE-WSAC 50W 230 is equipped with alarm relay for a pre-alarm or main alarm.

Display of the Wind Speed Alarm Controller PCE-WSAC 50W 230
Input	Pulse, analog (4 … 20-mA) or radio
Radio	IEEE 802.15.4 ISM 2.4 GHz
Units	km / h, mph, m / s
Power supply for sensors	+15V DC
Analog output	4 … 20-mA
Maximum input impedance	500 Ω
Resolution of the analog output	10 bits
Accuracy of the analog output	± 1.5%
Alarm relay	Max. 250V AC, 8 A
Display	Backlit 128 x 64 pixel LC display
Casing	Robust plastic housing
Protection class	IP65
Dimensions	145 x 95 x 125 mm / 5.7 x 3.7 x 4.9 in
Weight	650 g / 1.4 lbs

Sensor of the Wind Speed Alarm Controller PCE-WSAC 50W 230
Measuring range	4 … 180 km / h
Minimum start speed	8 km / h
Accuracy	± 1 km / h in the range 4 … 15 km / h
	± 3% in the range 16 … 180 km / h
Power supply	Battery mono cell D 1.5V DC
Power consumption	approx. 0.3 W with 1.5V DC power supply
Housing material	PA + FG
Ball-bearing	Stainless steel X65Cr13
Holder	Stainless steel AISI 304
Weight (with standard bracket)	about 680 g / 1.5 lbs
Geicht with self-leveling bracket	about 900 g / 2 lbs
Dimensions	320 x 110 x 100 mm / 12.6 x 4.3 x 3.9 in
Storage temperature	-35 … 70°C / -31 …158°F
Ambient temperature	-20 … 70°C / -4 … 158°F
Protection	IP65

The post Wind Speed Alarm Controller PCE-WSAC 50W 230 appeared first on Amet Co.,Ltd.

Wind Speed Alarm / Wind Alarm Controller PCE-FST-200-201-H-U

Admin Amet — Thu, 06 May 2021 03:22:40 +0000

Wind Sensor PCE-FST-200-201-H-U

Robust wind sensor for permanent installation / Powder coating /

Weatherproof, by use of seals / Heating

The sensor is manufactured from corrosion resistant alloy, thus making it impervious to oxidation or rust. This allows the device to be used in the toughest environments. Sensitive parts are protected with seals, to prevent the ingress of water or fine dust. A heating element prevents the sensor from freezing. The PCE-FST-200-201-H wind speed sensor is a cup anemometer and is sensitive to wind speed down to as little as, less than 0.5 meters per second. The wind speed sensor is available in different versions with different outputs. This one is available with 4 … 20-mA output and a 0 … 10V DC output.

– Alloys
– Heating
– Seal protection
– Analogue output signal
– Easy assembly
– Detects minutest movements of air

Output signal	0 … 10 V
Operating voltage	12 … 36V DC
Measurement reading range	0.5 m/s … 50 m/s (1.1 … 111.8 mph)
Measurement readings from	≤ 0.5 m/s (1.1 mph)
Measurement reading accuracy	± 0.5 m/s (1.1 mph), (< 5 m/s (11.2 mph)) ± 3% from scale end value
Heat output	10 W at 24V DC
Operating temperature range	-20 … 85°C / -4 … 185°F, at ≤ 95% rel. humidity
Maximum wind speed	70 m/s (156.6 mph) at max. 30 minutes
Power connection	M12
Protection class	IP55

The post Wind Speed Alarm / Wind Alarm Controller PCE-FST-200-201-H-U appeared first on Amet Co.,Ltd.

Wind Speed Alarm / Wind Alarm Controller PCE-FST-200-201-H-I

Admin Amet — Thu, 06 May 2021 03:10:18 +0000

Wind Sensor PCE-FST-200-201-H-I

Robust wind sensor for permanent installation / Powder coating /

Weatherproof, by use of seals / Heating

– Alloys
– Heating
– Seal protection
– Analogue output signal
– Easy assembly
– Detects minutest movements of air

Output signal	4 … 20-mA
Operating voltage	12 … 36V DC
Measurement reading range	0.5 m/s … 50 m/s (1.1 … 111.8 mph)
Measurement readings from	≤ 0.5 m/s (1.1 mph)
Measurement reading accuracy	± 0.5 m/s (1.1 mph), (< 5 m/s (11.2 mph)) ± 3% from scale end value
Heat output	10 W at 24V DC
Operating temperature range	-20 … 185°C / -4 … 85°F, at ≤ 95% rel. humidity
Maximum wind speed	70 m/s (156.6 mph) at max. 30 minutes
Power connection	M12
Protection class	IP55

The post Wind Speed Alarm / Wind Alarm Controller PCE-FST-200-201-H-I appeared first on Amet Co.,Ltd.

Wind Speed Alarm / Wind Alarm Controller PCE-FST-200-201-U

Admin Amet — Thu, 06 May 2021 03:06:03 +0000

Robust wind sensor PCE-FST-200-201-U for permanent installation / Powder coating / Weatherproof seal protection

The wind speed sensor is compatible with and can be mounted on to a wide variety of available measuring equipment. The sensor will detect even the minutest movements of air and the results are then output in analogue form. The sensor is manufactured from corrosion resistant alloy, thus making it impervious to oxidation or rust. This allows the device to be used in the toughest environments. Sensitive parts are protected with seals, to prevent the ingress of water or fine dust.

The PCE-FST-200-201 wind speed sensor is a cup anemometer and is sensitive to wind speed down to as little as, less than 0.5 meters per second. The wind speed sensor is available in different versions with different outputs. This one is available with 4 … 20-mA output and a 0 … 10V DC output.

– Alloys
– Long life span
– Seal protection
– Analogue output signal
– Easy assembly
– Detects minutest movements of air

Output signal	0 … 10V
Operating voltage	12 … 36V DC
Measurement reading range	0.5 m/s … 50 m/s (1.1 … 111.8 mph)
Measurement readings from	≤ 0.5 m/s (1.1 mph)
Measurement reading accuracy	± 0.5 m/s (1.1 mph), (< 5 m/s (11.2 mph)) ± 3% from scale end value
Heat output	10 W at 24V DC
Operating temperature range	-20 … 185°C / -4 … 85°F, at ≤ 95% rel. humidity
Maximum wind speed	70 m/s (156.6 mph) at max. 30 minutes
Power connection	M12
Protection class	IP55

The post Wind Speed Alarm / Wind Alarm Controller PCE-FST-200-201-U appeared first on Amet Co.,Ltd.