Cable Fault Meter - Amet Co.,Ltd

Cable Fault Meter PCE-CL 10

Admin Amet — Wed, 20 Jan 2021 07:58:53 +0000

PCE-CL 10 is a cable fault meter that uses the conductive method to detect metal pipes or pipe tracer wires. With PCE-CL 10, you also can locate power cables, lines, circuits, short circuits and ground points, as well as test protective tubing and coaxial cables. To perform these functions, it is not necessary to disconnect the power. Location can be identified in floors, ceilings, walls and the ground, even behind concrete and brick.

PCE-CL 10 features a detection system that is composed of a signal generator for active lines and a transmitter or receiver for cables without current. The signal generator feeds high-frequency electromagnetic signals through the lines being tested. At the end of the cable, these signals are converted into acoustic or optical signals by the receiver.
– Finds hidden, concealed, buried or underground metal pipes or pipe tracer wires found in floors, ceilings, walls, concrete and brick
– Locates power cables, lines, circuits, short circuits and ground points
– Tests protective tubing and coaxial cables
– Uses the conductive method

Technical specifications
Operating temperature / humidity	0 … +40 ºC or +32 … +104 ºF / max. 80% rh
Storing temperature / humidity	-20 … + 60 ºC or -4 … +140 ºF / max. 80% rh
Receiver
Auto shut-off	Approx. 5 min.
Absorbed power	Max. 40 mA
Display	LCD with bar graph
Battery	9 V
Dimensions	192 x 61 x 37 mm / 7.56 x 2.40 x 1.46 in
Weight	Approx. 180 g / 0.40 lb
Signal generator
Maximum voltage	400 V AC (0-60 Hz 400 V DC)
Transmitting frequency	125 kHz
Display	LCD
Auto shut-off	Approx. 1 hour
Absorbed power	Max. 18 mA
Battery	9 V
Fuses	Flink, 0.5 A / 500 V, 6.3 x 32 mm
Overvoltage category	CAT III / 300 V
Dimensions	130 x 69 x 32 mm / 5.12 x 2.72 x 1.26 in
Weight	Approx. 130 g / 0.30 lb

The post Cable Fault Meter PCE-CL 10 appeared first on Amet Co.,Ltd.

Cable Fault Meter PCE-CL 20

Admin Amet — Wed, 20 Jan 2021 07:56:23 +0000

PCE-CL 20 is a cable fault meter or locator used to detect live and voltage-free electrical wires. This cable detector also can be used to locate metallic and non-metallic gas or water pipes, identify short circuits, and follow lines inside walls or under flooring.

The PCE-CL 20 wire tracer consists of two individual units: a signal generator (or transmitter) and a receiver. Both units are equipped with bright LED lights for use in dark and dimly lit spaces. In addition, the receiver has a backlit LCD screen.
– Output signal: 125 kHz
– Compatible with one- or two-pole circuits
– Automatic, manual and UAC measuring modes
– Locates hidden cables, wires or pipes
– Helps identify short circuits and fuses
– Includes alligator clips, measuring tips, test leads and ground rod

Technical specification
Output	125 kHz
External Voltage Identification Area	DC 12 … 400 V ± 2.5%; AC 12 … 400 V (50 … 60 Hz) ± 2.5%
Display	LCD
Maximum Voltage	Max. 400 V AC / DC
Overvoltage Category	CAT III 300 V
Pollution Degree	2
Power Supply	9 V battery
Power Consumption (minimum voltage)	approximately 31 mA
Power Consumption (maximum voltage)	about 115 mA
Backup	F 0.5 A 500 V, 6.3 mm x 32 mm / 0.24 x 1.25in
Operating Conditions	0 … +40 ° C/+32 … +72 ° F rel. Humidity <80%
Storage Conditions	-20 … +60 °C /+12 … +92 ° F rel. Humidity <80%
Dimensions	190 mm x 89 mm x 42.5 mm 7.48 in x 3.50 in x 1.67 in
Weight	420 g / 0.92 lbs (including battery)
Technical specification for cable detector (receiver)
Detection Depth	depends on material and the particular application
Pole Application	about 0 … 2 m / 0 … 6.56 ft
Bipolar Application	about 0 … 0.5 m / 0 … 1.64 ft
Simple Loop	Up to 2.5 m / 8.2021 ft
Grid Voltage Detection	about 0 … 0.4 m / 0 … 1.31 ft
Display	LCD
Power Supply	6 x 1.5V AAA batteries
Power Consumption (minimum voltage)	about 32 mA
Power Consumption (maximum voltage)	approximately 89 mA
Environmental Conditions	0 … +40 °C / +32 … +72 ° F rel. Humidity <80%
Storage Conditions	-20 … +60 °C / +12 … +92 ° F rel. Humidity <80%
Dimensions	241.5 mm x 78 mm x 38.5 mm 9.5 in x 3.07 in x 1.51 in
Weight	350 g / 0.77 lbs (including batteries)

The post Cable Fault Meter PCE-CL 20 appeared first on Amet Co.,Ltd.

Cable Fault Meter PCE-CLT 10

Admin Amet — Wed, 20 Jan 2021 07:51:07 +0000

Cable Fault Meter PCE-CLT 10

Cable length measuring device with high measuring accuracy and fast measuring results / 2.4″ TFT display / Measuring range up to 3000 meters (9842.5 ft) / 20 preset cable types / Compact design / additional storage option for up to 99 cable types

The cable length measuring device PCE-CLT 10 is a multifunctional device which enables high accuracy and fast measurement results. If used appropriately, the cable length meter can be used to measure cables that have already been installed and are still to be installed. The cable length measuring device can be used to determine cable lengths of up to three kilometers. This is done by a time domain reflectometer. On the cable length measuring device itself, 20 standard types of cables are pre-stored and further storage of up to 99 cable types is also possible on the device itself. The stored data can be viewed directly on the device and can be used as required. Due to the built-in technology comparatively short cables can already be tested. The minimum length that a cable must have, which should be examined with the Cable Length Gauge.

To increase battery life, the device automatically shuts off after 10 minutes of inactivity. This automatic shutdown can be set individually by the user at intervals of 10 minutes. In addition to the automatic shutdown, the device offers a bright TFT display, which makes a quick reading of the measurement results also possible due to its backlighting.

– High measuring accuracy up to 3000 m / 9842.5 ft
– Results after a short measuring time
– 2.4″ TFT color display
– Automatic shutdown adjustable
– Illuminated TFT display
– 20 pre-set cable types

Measuring range cable length	Depending on the propagation speed of the tested cables 5 … 3000 m / 16.4 … 9842.5 ft with shortening factor ≤99.9% 5 … 2400 m / 16.4 … 7874.0 ft with shortening factor ≤80.0% 5 … 2000 m / 16.4 … 6561.7 ft with shortening factor ≤66.0% 5 … 1500 m / 16.4 … 4921.3 ft with shortening factor ≤50.0%
Measurement units	m, ft
Resolution	0.1 m
Measuring principle	Time domain reflectometer
Selection area	Automatic control range
Measurement accuracy	± [2% of reading ± 0.2 m] <100 m ± [2% of reading ± 0.5 m] ≤100 m
Impedance selector	Automatic output of the impedance control
Shortening factor / propagation speed	Adjustable from 1.0 … 99.9%
Cable types	20 standard cables
Memory	99 memory slots for individual cables
Connector type	BNC, RJ45
Power supply	2 x 1.5V AA battery
Battery status indicator	Yes
Automatic shutdown	Adjustable between 10 and 60 minutes
Menu languages	German, English
Operating temperatur	0 … 40°C / 32 … 104°F
Storage temperature	-10 … 50°C / 14 … 122°F
Relative humidity	0 … 80% rel. humidity

The post Cable Fault Meter PCE-CLT 10 appeared first on Amet Co.,Ltd.

Cable Fault Meter PCE-LT 12

Admin Amet — Wed, 20 Jan 2021 07:40:17 +0000

Cable fault meter PCE-LT 12
Voltage tester with many measuring functions / For electricians and IT employees / Analysis of network connection cables / Telephone connection test / Voltage and current measurement / NCV / backlight

The voltage tester is a versatile measuring instrument. In addition to the standard voltage and current measurements, the voltage tester also has a network analysis. With this network analysis, the voltage tester can be used to check, for example, LAN connections for their correct wiring and function. Telephone connections can also be checked for their function with this voltage tester. If cables can not be found again, the voltage tester also helps here.

Thanks to the cable finder function of the voltage tester, the operator can find the required cable in no time at all. To do this, the voltage tester must be connected to the connection of a cable. The voltage tester now acts as a transmitter. With the supplied receiver you can now easily find the desired cable in, for example, a wiring harness or behind walls with the voltage tester.

To check whether a voltage is applied to a cable, the voltage tester has an NCV (Not Connected Voltage) function. With this function, the voltage tester must only be held to the line. Both acoustically and visually, the voltage tester signals the operator that a voltage is applied to the line. Thanks to this contactless measuring function, the voltage tester reduces accidents at work due to electric shock.

– Extensive network connection testing
– Telephone connection examination
– Acoustic cable finder function
– Robust housing for mobile use
– Voltage, current, resistance measurement
– Contactless voltage detection

Measuring function
AC
Measuring range	Resolution	Accuracy
200 mV	0.1 mV	± (0.8% + 5 digits)
2V	1 mV	± (0.8% + 5 digits)
20V	0.01V	± (0.8% + 5 digits)
200V	0.1V	± (0.8% + 5 digits)
750V	1V	± (0.8% + 5 digits)

Maximum input voltage: 750V AC
Frequency range: 40 … 400 Hz
Conversion RMS

DC
Measuring range	Resolution	Accuracy
200 mV	0.1 mV	± (0.5% + 5 digits)
2V	1 mV	± (0.5% + 5 digits)
20V	0.01V	± (0.5% + 5 digits)
200V	0.1V	± (0.5% + 5 digits)
1000V	1V	± (0.8% + 5 digits)

Maximum input voltage: 1000V DC

Alternating current
Measuring range	Resolution	Accuracy
200 μA	0.1 μA	± (1.5% + 5 digits)
2000 μA	1 μA	± (1.5% + 5 digits)
20-mA	0.01-mA	± (1.5% + 5 digits)
200-mA	0.1-mA	± (1.5% + 5 digits)
2 A	0.001 A	± (3.0% + 5 digits)
20 A	0.01A	± (3.0% + 5 digits)

Overload protection at μA, mA: 200-mA / 1000V fuse
Overload protection at A: 10 A / 500V fuse
maximum input current μA: 2000 μA
maximum input current mA: 200-mA
maximum input current A: 10 A.
Frequency range: 40 … 400 Hz
Conversion RMS

Measuring function
Direct current
Measuring range	Resolution	Accuracy
200 μA	0.1 μA	± (1.2% + 5 digits)
2000 μA	1 μA	± (1.2% + 5 digits)
20-mA	0.01-mA	± (1.2% + 5 digits)
200-mA	0.1-mA	± (1.2% + 5 digits)
2 A	0.001 A	± (2.0% + 5 digits)
20 A	0.01A	± (2.0% + 5 digits)

Overload protection at μA, mA: 200-mA / 1000V fuse
Overload protection at A: 10 A / 500V fuse
maximum input current μA: 2000 μA
maximum input current mA: 200-mA
maximum input current A: 10 A.

Measuring function
Resistance
Measuring range	Resolution	Accuracy
200 Ω	0.1 Ω	± (1.0% + 5 digits)
2 kΩ	0.001 kΩ	± (1.0% + 5 digits)
20 kΩ	0.01 kΩ	± (1.0% + 5 digits)
200 kΩ	0.1 kΩ	± (1.0% + 5 digits)
2 MΩ	0.001 MΩ	± (1.0% + 5 digits)
20 MΩ	0.01 MΩ	± (1.0% + 5 digits)

Diode measurement
Measuring range	Resolution	Accuracy
Indicates the forward voltage	1 mV	–

Continuity test
Measuring range	Resolution	Accuracy
Beep at <70 Ω	0.1 Ω	–

Other specifications
Range selection	Automatically and manually
Measurement with receiver	Detecting cable bridges, detecting cable runs
Measurement with network function	Detection of open and closed circuits,
	wrong connection, “split pair”, “reverse” connection,
	Network integration test, screening test
Further measurement function	“NCV” detection, telephone connection testing
Display	LCD, 1999 digits
Overload indicator	“OIL”
Automatic shutdown	After 15 minutes of inactivity
Fuses	F10A / 500V, F200mA / 1000A
Battery indicator	Display when battery is discharged
Power supply	9V block battery
Operating conditions	0 … 40°C / 32 … 104°F
	-10 … 50°C / 14 … 122°F
Dimensions	195 x 92 x 55 mm / 7.7 x 3.6 x 2.2 in
Weight	Approx. 400 g / < 1 lb (with batteries)

The post Cable Fault Meter PCE-LT 12 appeared first on Amet Co.,Ltd.

Cable Fault Meter PCE-180 CBN

Admin Amet — Wed, 20 Jan 2021 07:37:35 +0000

PCE-180 CBN is a handheld, portable, battery-powered wire tracer or cable locator that consists of an amplifier probe and acoustic signal or tone generator. This locating device is designed to detect wires or cables hidden behind walls or insulation.
– Uses an acoustic signal to detect wires and cables, including network and coaxial cables
– Features a 3-position toggle switch (and 3-color LED) for line polarity, continuity and voltage testing
– Comes with red and black test leads with alligator clips
– Has a standard 4-conductor modular cord and plug
– Battery powered
– Recessed on / off button prevents accidental activation and battery drain
– Adjustable volume and selection of either single solid tone or dual alternating tone
– Compatible with other signal or tone generators used to detect wires or cables
– Contains built-in headphone jack

Technical specifications
Detection method: Acoustic signal
Tones: Pulsing or continuous
Connections: RJ-11, alligator clips and headphone jack
Power supply: 2 x 9 V batteries
Certifications: CE, IEC / EN 61010-1:01
Operating conditions: 0 … +50 °C / +32 … +122 °F and 5 … 95% rh
Dimensions: 60 x 65 x 30 mm / 2.36 x 2.56 x 1.18″ signal generator and 245 x 60 x 30 mm / 9.65 x 2.36 x 1.18″ amplifier probe
Weight: 120 g / 0.26 lb signal generator and 140 g / 0.31 lb amplifier probe

The post Cable Fault Meter PCE-180 CBN appeared first on Amet Co.,Ltd.

PoE tester / cable tester PCE-POE 10

Admin Amet — Wed, 20 Jan 2021 07:35:49 +0000

PoE tester with three test functions / transmitter and remote unit / LCD / RJ45 connections / flashlight function / PoE standard detection

The PoE tester has 3 test modes. This enables the PoE tester to perform a continuity test of the Ethernet cables, to identify the PoE types and to measure the PoE performance. This makes the PoE tester an ideal tool for every network technician and installer of Ethernet cables.

The PoE tester consists of a transmitter / main unit and a remote unit. In the continuity test mode, the PoE tester can also determine whether all wires of the Ethernet cable are connected correctly. The PoE tester can also measure the performance of connected PoE devices. This is used for troubleshooting and detection in the network.

– continuity test

– Cable test

– voltage measurement

– Detection of the PoE standard

– PoE power measurement

– LCD with graphics menu

Continuity test
cable types	STP, UTP
Maximum cable length	600 m
Connection type	Sender -> remote unit
	Sender -> router / switch
PoE exam
Measuring range	5 … 60 V
Standard recognition	802.3af / at (standard / non-standard)
power	0 … 18 W.
Power function
Voltage measuring range	0 … 60 V
Current measuring range	0 … 3 A
Power measurement range	0 … 180 W.
Entrance protection	48 V / 5 mA DC
Max. Operating current	80 mA
Loop length	10 m, 100 m, 1000 m
Power supply	3 x 1.5 V AAA batteries
connections	RJ45

The post PoE tester / cable tester PCE-POE 10 appeared first on Amet Co.,Ltd.

Cable Fault Meter PCE-191 CB

Admin Amet — Wed, 20 Jan 2021 07:32:31 +0000

PCE-191 CB is a handheld, portable wire tracer, cable detector or cable fault meter used for locating wires and cables hidden behind walls and insulation. Comprised of a signal transmitter and receiver, this easy-to-use cable locating device emits an acoustic alarm.
– Detects live cables and wires (it is not necessary to remove the fuse)
– Compact design
– CE, IEC / EN 61010-1:01 safety ratings

Technical specifications
Detection method	Acoustic signal
Power range	220 to 240 V AC
Frequency range	50 / 60 Hz
Power supply	Transmitter: Electric power Receiver: 9 V battery
Weight	300 g / 0.67 lb

The post Cable Fault Meter PCE-191 CB appeared first on Amet Co.,Ltd.

Cable Fault Meter PCE-170 CB

Admin Amet — Wed, 20 Jan 2021 04:53:13 +0000

Cable fault meter PCE-170 CB
Locating device with a network cable finder function / Cable finder adjustable intensity / Suitable for mobile applications / Continuity check / RJ 45, RJ 11, BNC, coaxial cable

The locating device is a universally applicable measuring device. With this locating device, for example, RJ11 ISDN telephone lines can be checked for their function. For this purpose it is sufficient to connect the RJ 11 plug of the locating device to the telephone socket. The locator instantly shows the operator if this port is connected. A ringing test is also possible with the locating device. For this, the connection must be called via an external telephone. Another function of the locating device is the testing of LAN connections in sockets. In this test method, the locating device indicates a short circuit, incorrect wiring, “reversed” or “split pairs”.

Another special feature of the locating device is the storage option. All additional modules of the locating device can be safely plugged into the main module. This prevents the loss of a module at the locating device. Even the exposed test leads of the locating device can be stored safely. Thanks to this stowage possibility, the locating device can be easily transported.

– Network cable continuity test
– Intensity of the receiver adjustable
– Cable protection cap for safe transport
– All modules stowed in the transmitter
– ISDN connection test
– Continuity test with cables

Test functions	Network Cable Testing
	Coaxial cable test
	Network cable Finder
	Continuity test
	Telephone line test

Continuity test	Continuity is signaled up to 10 Ω
Input voltage	Max. 24V
Connections	RJ45, BNC, RJ11,
	Crocodile clips red and black
Power supply (transmitter)	9V block battery
Power supply (receiver)	9V block battery
Operating conditions	0 … 50°C / 32 … 122°F, < 80% rh
Dimensions	210 x 80 x 50 mm / 8.3 x 3.1 x 2 in
Weight	About 416 g / < 1 lb

The post Cable Fault Meter PCE-170 CB appeared first on Amet Co.,Ltd.

Cable Fault Meter PCE-LT 20

Admin Amet — Wed, 20 Jan 2021 04:51:13 +0000

Cable fault meter PCE-LT 20
Cable tester for network cables, coaxial cables, single cores, telephone lines etc. / Set consisting of cable tester and remote unit / For assignment of wires and cable search

The cable tester PCE-LT 20 is used to determine the correct assignment of wire pairs in network cables. Furthermore, the cable tester can be used to locate lines and determine the connection between cables. The cable tester is a universally applicable test device for the electrician and service technician. The cable tester PCE-LT 20 consists of a main unit and a remote display. The remote unit is used to control the assignment of the wire pairs on a remote network socket.

Furthermore, the remote unit of the cable tester is also used as a receiver for the locating signal for cable search. Using the USB sockets, the connection can be checked by a USB cable using the cable tester. The cable tester PCE-LT 20 can also be used to check analog telephone systems. For this purpose, the main unit is simply connected to a telephone jack instead of a terminal. Two LEDs on the cable tester signal an incoming call.

– Automatic / manual test of lan cables
– Main and remote unit
– Testing of coaxial cables, single cores, etc.
– Easiest operation
– Cable location up to 50 cm depth
– For testing of analog telephone systems

Display	LED bargraph displays
	Multicolor LEDs
Sound	Square-wave signal 1 kHz
Over voltage protection	80V DC
Tones	Fast / slow pulse
Remote unit range	1 Hz … 12 kHz
Locating depth	Max. 50 cm
Operating conditions	0 … 40°C / 32 … 104°F, max. 80% rh
Storage conditions	-10 … 50°C / 14 … 122°F, max. 80% rh
Power supply	9V block battery
Dimensions	Main unit: 263 x 55 x 37.3 mm / 10.4 x 2.2 x 1.5 in
	Remote unit: 180 x 82 x 43.8 mm / 7.1 x 3.2 x 1.7 in
Weight	Main unit: 210 g / < 1 lb
	Remote unit: 280 g / < 1 lb
Standards	EN61326-1
	IEC 61000-4-2
	IEC 61000-4-3
	IEC 61000-4-8
	CISPR11

The post Cable Fault Meter PCE-LT 20 appeared first on Amet Co.,Ltd.

Cable Fault Meter PCE-186 CB

Admin Amet — Wed, 20 Jan 2021 04:49:26 +0000

Cable fault meter PCE-186 CB
Cable finder with voltage tester / Non-conducting probe tip / Headphone jack / RJ-11 Plug with crocodile clamps / For line break detection / For non-live cables / Transport bag

The cable finder PCE-186 CB consists of a transmitter and a receiver. The transmitter of the line finder has many functions. For example, the line finder can be used to find wires in walls or break cables. Another function of the line finder is the testing of telephone sockets. To do this, the RJ-11 connector must be plugged into the telephone socket to be tested. The transmitter of the line finder signals an incoming call based on the LEDs. This feature does not require a phone for verification.

In addition to these functions, the line finder has a multimeter function. This allows AC voltages and DC voltages up to 1000 VDC to be measured. Furthermore, resistance measurements and continuity measurements are possible. Because of this variety of functions, the line finder is an optimal helper for maintenance and repair work on cables.

– Voltage measurement AC / DC
– For detection of line interruptions
– Non-conductive probe tip
– Sensitivity adjustment
– Transport bag
– Cable tracking in walls and cable duct
– Different beeps
– Resistance measurement

AC voltage measurement
Measuring range	Resolution	Accuracies
400 mV	0.1 mV	± 1% + 5 Dgt
4V	1 m V	± 1% + 5 Dgt
40V	10 mV	± 1% + 5 Dgt
400V	100 mV	± 1% + 5 Dgt
750V	1V	± 1% + 5 Dgt

DC
Measuring range	Resolution	Accuracies
400 mV	0.1 mV	± 0.5% + 3 Dgt
4V	1 mV	± 0.5% + 3 Dgt
40V	10 mV	± 0.5% + 3 Dgt
400V	100 mV	± 0.5% + 3 Dgt
750V	1V	± 0.5% + 3 Dgt

Resistance
Measuring range	Resolution	Accuracies
400 Ω	0.1 Ω	± 1.2% + 3 Dgt
4 kΩ	1 Ω	± 1.2% + 3 Dgt
40 kΩ	10 Ω	± 1.2% + 3 Dgt
400 kΩ	100 Ω	± 1.2% + 3 Dgt
4 MΩ	1 kΩ	± 1.2% + 3 Dgt
40 MΩ	10 kΩ	± 2.0% + 4 Dgt

Input impedance	10 MΩ
Overvoltage protection	500V DC

Continuity test
Measuring range	Beep
400 Ω	> 25 Ω

Line detection	By beep
Beep switchable	Slowly pulsating tone
	Fast pulsating tone

Locating depth	Max. 50 cm
Connections	RJ-11 plug, coconut clamps
Power supply receiver	9V block battery
Power supply transmitter	9V block battery (transmitter function)
	2 x 1.5V AAA (voltmeter)
Environmental conditions	0 … 50°C / 32 … 122°F, 5 … 95% rh
Weight transmitter	About 265 g / < 1 lb
Weight receiver	About 89 g / < 1 lb

The post Cable Fault Meter PCE-186 CB appeared first on Amet Co.,Ltd.