Inspection Camera PCE-HDM 20
PCE-HDM 20
Availability : กรุณาติดต่อสอบถาม
Inspection Camera PCE-HDM 20
TRMS digital multimeter for current, voltage, capacity, frequency and resistance /
CAT IV 600 V / CAT III 1000 V / with contactless temperature measurement via infrared /
MAX, MIN and HOLD function
The inspection camera PCE-HDM 20 is a universal measuring instrument. The inspection camera PCE-HDM 20 allows a variety of measurement projects. This makes it easy to investigate current, voltage, capacitance, frequency and resistances. In addition to these measurements, the PCE-HDM 20 digital inspection camera can also perform measurements such as duty cycle, diode test and continuity test.
In addition to the electrical parameters, the digital inspection camera can also be used for temperature determination. The determination of the temperature can be done in two different ways. In the first case, the temperature can be measured by plugging in a thermocouple. In the second case, the digital inspection camera offers non-contact temperature measurement. For this purpose, an infrared optic is installed on the digital inspection camera, which thus enables the temperature determination from a distance. The thermal image is then clearly shown on the display. For a closer look, there are five different colour palettes available, which can be chosen at will. To measure the temperature using the IR sensor, a lamp helps to make darkened areas brighter. In addition, the digital inspection camera has a laser that helps to locate the target area.
– Automatic shutdown
– 2.8″ LC Display
– Built-in thermal imaging camera
– Heat measurement via IR or thermocouple
– Resistance measurement and continuity test
– Diode test and capacitance measurement
| Temperature measurement with thermal imaging camera | ||||
| Sampling rate | 3 times per second | |||
| Field of view (FOV) | 21° x 21°C / 0.5 m / 1 ft 7.6″ | |||
| Spatial resolution (IFOV) | 4.53 mrad | |||
| Resolution infrared camera | 80 x 80 Pixel | |||
| Thermal sensitivity / NETD | <0.1°C (0.18°F) at 30°C (86°F) / 100 mK | |||
| Frame rate | 50 Hz | |||
| Focal length | 7.5 mm | |||
| Sensor type | uncooled microbolometer | |||
| Spectral range | 8 … 14 µm | |||
| Measuring range object temperature | -20 … 260°C / -4 … 500°F | |||
| Measurement accuracy | ± 3°C / 5.4°F or 3% of the measured value, at 10 … 35°C / 50 … 95°F ambient temperature and > 0°C / 32°F object temperature | |||
| General Technical Data | ||||
| Display | Colour TFT, 6000 points with status display | |||
| Conversion | TRMS | |||
| Reference standards | IEC/EN61010-1, IEC/EN61326-1 | |||
| Isolation | Double | |||
| Pollution degree | 2 | |||
| Overload category | CAT IV 600 V, CAT III 1000 V | |||
| Battery type | 1 x 7.4V Li-Ion battery, 2300-mAh | |||
| Power supply charger | 100 / 240V AC, 50/60 Hz, 10V DC, 1 A | |||
| Battery level indicator | Yes | |||
| Automatic shutdown | After 15, 30 or 60 minutes of inactivity (deactivatable) | |||
| Fuses | F10A/1000V, 10 x 38 mm (Input 10 A) F800mA/1000V, 6 x 32 mm (Input mA, µA) |
|||
| Test temperature | 18 … 28°C / 64 … 82°F | |||
| Operating conditions | 5 … 40°C / 41 … 104°F, <80% r.H. | |||
| Storage conditions | -20 … 60°C / -4 … 140°F, <80% r.H. | |||
| Maximum operating height | 2000 m / 2187 yd | |||
| Dimensions | 175 x 85 x 55 mm / 6.9 x 3.3 x 2.1 in | |||
| Weight | 540 g / 1 lb 3oz | |||
| Technical Data DC Voltage | ||||
| Measuring range | Resolution | Measurement accuracy | Input resistance | Overload protection |
| 600 mV | 0.1 mV | ± (0.2% of measurement value + 5 Dgt) | >10 MΩ | 1000V DC / ACrms |
| 6V | 0.001V | ± (0.2% of measurement value + 5 Dgt) | >10 MΩ | 1000V DC / ACrms |
| 60V | 0.01V | ± (0.2% of measurement value + 5 Dgt) | >10 MΩ | 1000V DC / ACrms |
| 600V | 0.1V | ± (0.2% of measurement value + 5 Dgt) | >10 MΩ | 1000V DC / ACrms |
| 1000V | 1V | ± (0.2% of measurement value + 5 Dgt) | >10 MΩ | 1000V DC / ACrms |
| Technical Data AC Voltage (TRMS) | ||||
| Measuring range | Resolution | Measurement accuracy (50 … 60 Hz) |
Measurement accuracy (61 Hz … 1 kHz) |
Overload protection |
| 6V | 0.001V | ± (0.8% of measurement value +5 Dgt)± | (2.4% of measurement value +5 Dgt) | 1000V DC / ACrms |
| 60V | 0.01V | ± (0.8% of measurement value +5 Dgt) | ± (2.4% of measurement value +5 Dgt) | 1000V DC / ACrms |
| 600V | 0.1V | ± (0.8% of measurement value +5 Dgt) | ± (2.4% of measurement value +5 Dgt) | 1000V DC / ACrms |
| 1000V | 1V | ± (0.8% of measurement value +5 Dgt) | ± (2.4% of measurement value +5 Dgt) | 1000V DC / ACrms |
| Technical Data DC and AC voltage (TRMS) | ||||
| Measuring range | Resolution | Measurement accuracy | Input resistance | Overload protection |
| 6V | 0.001V | ± (2.4% of measurement value +20 Dgt) | >10 MΩ | 1000V DC / ACrms |
| 60V | 0.01V | ± (2.4% of measurement value +20 Dgt) | >10 MΩ | 1000V DC / ACrms |
| 600V | 0.1V | ± (2.4% of measurement value +20 Dgt) | >10 MΩ | 1000V DC / ACrms |
| 1000V | 1V | ± (2.4% of measurement value +20 Dgt) | >10 MΩ | 1000V DC / ACrms |
| Technical Data Direct Current | ||||
| Measuring range | Resolution | Measurement accuracy | Overload protection | |
| 600 µA | 0.1µA | ± (0.9% of measurement value +5 Dgt) | Protection 800-mA / 1000 V | |
| 6000 µA | 1 µA | ± (0.9% of measurement value +5 Dgt) | Protection 800-mA / 1000V | |
| 60-mA | 0.01-mA | ± (0.9% of measurement value +5 Dgt) | Protection 800-mA / 1000V | |
| 600-mA | 0.1-mA | ± (0.9% of measurement value +8 Dgt) | Protection 800-mA / 1000V | |
| 10 A | 0.01 A | ± (1.5% of measurement value +5 Dgt) | Protection 10 A / 1000V | |
| Technical Data Alternating Current (TRMS) | ||||
| Measuring range | Resolution | Measurement accuracy | Overload protection | |
| 600 µA | 0.1 µA | ± (1.2% of measurement value +5 Dgt) | Protection 800-mA / 1000V | |
| 6000 µA | 1 µA | ± (1.2% of measurement value +5 Dgt) | Protection 800-mA / 1000V | |
| 60-mA | 0.01-mA | ± (1.2% of measurement value +5 Dgt) | Protection 800-mA / 1000V | |
| 600-mA | 0.1-mA | ± (1.2% of measurement value +5 Dgt) | Protection 800-mA / 1000V | |
| 10 A | 0.01 A | ± (1.5% of measurement value +5 Dgt) | Protection 10 A / 1000V | |
| Technical Data Coil Current | ||||
| Measuring range | Resolution | Measurement accuracy (50 … 60 Hz) |
Measurement accuracy (61 Hz … 1 kHz) | Overload protection |
| 30 A | 0.01 A | ± (0.8% of measurement value +5 Dgt) | ± (2.4% of measurement value +5 Dgt) | 1000V DC / ACrms |
| 300 A | 0.1 A | ± (0.8% of measurement value +5 Dgt) | ± (2.4% of measurement value +5 Dgt) | 1000V DC / ACrms |
| 3000 A | 1 A | ± (0.8% of measurement value +5 Dgt) | ± (2.4% of measurement value +5 Dgt) | 1000V DC / ACrms |
| Technical Data Diode Test | ||||
| Test current | <1.5-mA | |||
| Maximum voltage at the open circuit | 3.3V DC | |||
| Resistance and continuity test | ||||
| Measuring range | Resolution | Measurement accuracy | Acoustic warning sound | Overload protection |
| 600 Ω | 0.1Ω | ± (0.5% of measurement value +10 Dgt) | >50 Ω | 1000V DC / ACrms |
| 6 Ω | 0.001 kΩ | ± (0.5% of measurement value +5 Dgt) | >50 Ω | 1000V DC / ACrms |
| 60 kΩ | 0.01 kΩ | ± (0.5% of measurement value +5 Dgt) | >50 Ω | 1000V DC / ACrms |
| 600 kΩ | 0.1 kΩ | ± (0.5% of measurement value +5 Dgt) | >50 Ω | 1000V DC / ACrms |
| 6 MΩ | 0.001 MΩ | ± (0.5% of measurement value +5 Dgt) | >50 Ω | 1000V DC / ACrms |
| 60 MΩ | 0.01 MΩ | ± (2.5% of measurement value +10 Dgt) | >50 Ω | 1000V DC / ACrms |
| Technical Data Frequency | ||||
| Measuring range | Resolution | Measurement accuracy | Overload protection | |
| 40 Hz … 10 kHz | 0.01 Hz … 0.001 kHz | ± (0.5% of measurement value) | 1000V DC / ACrms | |
| 60 Hz | 0.01 Hz | ± (0.09% of measurement value +5 Dgt) | 1000V DC / ACrms | |
| 600 Hz | 0.1 Hz | ± (0.09% of measurement value +5 Dgt) | 1000V DC / ACrms | |
| 6 kHz | 0.001kHz | ± (0.09% of measurement value +5 Dgt) | 1000V DC / ACrms | |
| 60 kHz | 0.01kHz | ± (0.09% of measurement value +5 Dgt) | 1000V DC / ACrms | |
| 600 kHz | 0.1 kHz | ± (0.09% of measurement value +5 Dgt) | 1000V DC / ACrms | |
| 6 MHz | 0.001 MHz | ± (0.09% of measurement value +5 Dgt) | 1000V DC / ACrms | |
| 10 MHz | 0.01 MHz | ± (0.09% of measurement value +5 Dgt) | 1000V DC / ACrms | |
| Technical Data Duty Cycle | ||||
| Measuring range | Resolution | Measurement accuracy | ||
| 5 … 95% | 0.1% | ± (1.2% of measurement value +2 Dgt) | ||
| Technical Data Capacitance | ||||
| Measuring range | Resolution | Measurement accuracy | Overload protection | |
| 60 nF | 0.01 nF | ± (1.5% of measurement value +20 Dgt) | 1000V DC / ACrms | |
| 600 nF | 0.1 nF | ± (1.2% of measurement value +8 Dgt) | 1000V DC / ACrms | |
| 6 µF | 0.001 µF | ± (1.5% of measurement value +8 Dgt) | 1000V DC / ACrms | |
| 60 µF | 0.01 µF | ± (1.2% of measurement value +8 Dgt) | 1000V DC / ACrms | |
| 600 µF | 0.1 µF | ± (1.5% of measurement value +8 Dgt) | 1000V DC / ACrms | |
| 6000 µF | 1 µF | ± (2.5% of measurement value +20 Dgt) | 1000V DC / ACrms | |
| Technical Data Temperature (Thermoelement Type K) | ||||
| Measuring range | Resolution | Measurement accuracy | Overload protection | |
| -40 … 600°C / -40 … 1112°F | 0.1°C / 0.18°F | ± (1.5% of measurement value 3°C / 5.4°F) | 1000V DC / ACrms | |
| 600 … 1000°C / 1112°F … 1832°F | 1°C / 1.8°F | ± (1.5% of measurement value 3°C / 5.4°F) | 1000V DC / ACrms | |
| PCE-HDM 20 | ||||
เฉพาะลูกค้าที่เข้าสู่ระบบ และเคยซื้อสินค้าชิ้นนี้แล้วเท่านั้น ที่เขียนบทวิจารณ์ได้
สินค้าที่เกี่ยวข้อง
Inspection Camera
PCE-VE 200SV3
Inspection Camera
PCE-VE 270HR
Inspection Camera
PCE-VE 200UV
Inspection Camera
PCE-IVE 300
Inspection Camera
PCE-VE 180
Inspection Camera
PCE-TC 25
Inspection Camera
PCE-VE 340N
Inspection Camera
PCE-VE 330N
รีวิว
ยังไม่มีบทวิจารณ์