PCE-900-ICA Material hardness tester for metals incl. ISO Calibration Certificate
Measurement of tensile strength / 9 materials pre-calibrated / Conversion into 6 different hardness scales /�Type D impact probe
The Leeb Hardness Tester PCE-900 measures the hardness of nine different metals using the Leeb rebound method. This means that with the hardness tester a firing pin bounces on a metallic surface and the intensity of the rebound is used as an indicator of the material hardness. The hardness tester PCE-900 measures the metal hardness in 6 different hardness scales, including: Rockwell, Vickers, Leeb, Brinell and Shore. A distinction is made between Rockwell B and C when measuring in the Rockwell scale.
The Leeb hardness tester PCE-900 comes with a type D impact probe as standard. This probe can be used for many measurements. Via the optional software, the measured values can be transmitted live to the PC. This makes the PCE-900 Leeb hardness tester an important instrument in the field of material inspection in goods control.
– Hardness test by the rebound method
– 9 material presets
– Easy to handle
– Data interface
– Six different hardness scales
– incl. ISO Calibration Certificate
Measuring range | 200 … 900 HL |
Measuring accuracy | ± 0.8% at HLD=900 |
Materials | 9 common material presets |
Hardness scales | Leeb: HL Rockwell C: HRC Rockwell B: HRB Brinell: HB Vickers: HV Shore: HSD |
Display | 12.5 mm / 0.5″ LCD with backlight |
Impact probe | Type D |
Memory | 50 data sets |
Interface | RS-232 |
Power supply | 4 x 1.5V AAA batteries |
Environmental conditions | Operating temperature: -10 … 50°C / 14 … 122°F Storage temperature: -30 … 60°C / -22 … 140°F Relative humidity: < 90% |
Dimensions | 142 x 77 x 40 mm / 5.59 x 3.03 x 1.58 in |
Weight | Device weight: ca. 130 g / < 1 lb Probe weight: 75 g / < 1 lb |
Cable length | ca. 1.2 m / 3.9 ft |
รีวิว
ยังไม่มีบทวิจารณ์