Simple�process controller for thermocouples type S /
Output as a changeover relay or SSR
On / Off temperature control or PID control / optional alarm function
The process controller is a simple temperature controller for use in simple task areas. The input signal is processed by this thermostat with thermocouples type S.The temperature controller features a simple on-off temperature controlin the basic version. Optionally, the temperature controller can be equipped with a PID control. The display of the current measured value is displayed directly on the temperature controller via a 4-digit LED display. The setpoint is set using the dial on the thermostat.
– On / Off control
– Cabinet is protected according to IP 40
– for thermocouples type S
– 4-digit LED display
– Cabinet is protected according to IP 40
– for thermocouples type S
– 4-digit LED display
PCE-RE55-S | |
Sensor input | Thermoelement Type S |
Measurement and control areas | 0 … 1600 ° |
Control behaviour | On / off control PID (optional) |
Measured value display | 4-digit LED display Height: 10 mm |
Control outputs (type selectable) | Relay, change-over contact: 230V / 2A SSR output: 0/5 V |
Alarm output (optional) | Relay, normally open relay: 230V / 1A |
Ambient temperature | Operation: 0 … 50 ° C (optimum 23 ° C) Storage: -20 … 70 ° C |
Humidity | < 85 % r.H. (non-condensing) |
Dimensions | 96 x 96 x 65 mm |
Panel cut-out | 92 x 92 mm |
Supply voltage | 85 …. 253 V AC / DC |
Input | < 4 VA |
Protection | Front: IP 40 Back: IP 20 |
Weight | < 300 g |
Assembly | mech. mounting clips with clamping screws electr.connection via terminal block |
รีวิว
ยังไม่มีบทวิจารณ์