Pressure / Fill Level Sensor PCE-SLS 20

The stainless steel immersion probe is suitable for measuring the level in the process. The immersion probe is particularly suitable for level measurement of waste water, contaminated or highly viscous media. The stainless steel immersion probe uses a capacitive ceramic measuring cell and determines the fill level in containers via the pressure. Due to the high accuracy of ± 0.35% of the measuring range, the stainless steel immersion probe is also suitable for low filling levels. The measuring range of the stainless steel immersion probe extends from 0 … 0.4 mH2O to 0 … 200 mH2O. This corresponds to a pressure of 40 mbar to 20 bar. The stainless steel immersion probe outputs the measured value as an analog signal, depending on the variant, in 4 … 20 mA or 0 … 10 V. This means that the level sensor can be connected to almost any process evaluation device.

– Nominal pressures up to 200 mH2O
– Accuracy ± 0.35% of the measuring range
– 39.5 mm diameter
– Suitable for drinking water production
– Ceramic sensor
– Suitable for dirty and viscous media
– Different configurations possible