In addition to testing concrete, the Surface Tester can also store measured data. The stored measurement data can be transferred from the Surface Tester to a PC after a measurement run. For this, the mini-USB interface is available on the Surface Tester. The evaluation of the measurements from the Surface Tester is carried out with the supplied PC software.
The Surface Tester displays measurements Rebound Value and can display force in PSI, MPa, kgF/cm², or N/mm². The Surface Tester can be setup to measure at test angles of downward(-90°), downward(-45°), horizontal (0°), upward(45°), or upward(90°).
– OLED for reading the measured values
– USB interface for connection to a PC
– Measuring range 10 … 60 N/mm², 1500 … 8500 lbs/in² or PSI
– Measurement of the hardness of concrete
– Data storage for later analysis
– Rechargeable battery for mobile use
Measuring range | 10 … 60 N/mm², 1500 … 8500 PSI (lbs/in²) |
Accuracy | ± 0.1 R |
Display | OLED |
Nominal kinetic energy | 2.207 Nm, 0.225 kgm |
Interface | Bluetooth, micro USB |
Storage | 1,000 data units with 256 measurements each |
Operating conditions | -40 … 60°C / -40 … 140°F |
Power supply | 3.7V Li-ion battery |
Power supply (power supply) � | Primary: 100 … 240V AC, 50/60 Hz |
Secondary: 5V DC, 1 A | |
Dimensions | 280 x 75 x 60 mm / 11 x 3 x 2.4 in |
Weight | About 1.2 kg / 2.6 lbs |
รีวิว
ยังไม่มีบทวิจารณ์