Temperature Signal Converter UMU-100 without relay

UMU 100 Temperature Signal Converter
TemperatureTransducer for Pt100 sensors / connection for 2, 3 and 4-thread conductors as well as for thermo elements / additionally for current and voltage inputs

The UMU-100 Temp. Signal Converter is the ideal device for Pt100 sensors as well as for thermo elements (type K, J, etc…). The UMU-100 Temp. Signal Converter can avoid damages in both machines and production plants. The UMU-100 Temp. Signal Converter integrates current and a voltage output signals. The UMU-100 Temp. Signal Converter can optionally have a relay to check for instance a visual alarm when it exceeds the alarm limit. Thanks to the galvanic insulation, power supply does not affect the measured signal, so the UMU-100 Temp. Signal Converter is a safe and accurate measurement device to be used in your company.

View  / print user’s manual of the UMU-100 Temp. Signal Converter

 

– For Pt100 sensors and thermo elements

– Error display

– Universal power supply

– Galvanic insulation (inputs and outputs)

– 2 optional alarm relays

– Voltage and current input

– Voltage and current output

– It can be connected to a display

 

 

 

Technical Specifications
Input	Measurement range	Accuracy
Pt100	-200 °C … 850 °C	±0,2 °C
Linear resistance	0 Ω … 10 kΩ	±0,1Ω
Potentiometer	10 Ω … 100 kΩ	—
Thermo element (depending on the thermo element type)	– 200 °C … 2300 °C	±2 °C
Current (free programming)	0 mA … 20 mA 4 mA … 20 mA	±4 µA
Voltage (free porgraming)	0 V … 1 V DC 0,2 V … 1 V DC 0 V … 5 V 1 V … 5 V 0 V … 10 V 2 V … 10 V	±0 µV
Output	Range	Load
Current	0 mA … 20 mA 4 mA … 20 mA 20 mA … 0 mA 20 mA … 4 mA	maximum 20 mA, 800 Ω, 16 V DC
Voltage	0 V … 1 V DC 0,2 V … 1 V DC 0 V … 5 V 1 V … 5 V 0 V … 10 V 2 V … 10 V 1 V … 0 V DC 1 V … 0,2 V DC 5 V … 0 V 5 V … 1 V 10 V … 0 V 10 V … 2 V	min. 500 kΩ
Relays (close, open, Hold)	Maximum voltage: 250 V RMS Maximum current: 2 A AC o 1 A DC Maximum power (AC): 500 VA
General Specifications
Power supply	24 V AC … 230 V AC / 50 Hz … 60 Hz 24 V DC … 250 V DC
Max. absorbed power	≤2,5 W
Response time (0 % … 90 % / 100 % … 0 %)	Temperature input: ≤1 s Current and voltage input: ≤400 ms
Calibration temperature	20 °C … 28 °C
Max. relative humidity	90 % r.H.
Dimensions with front display	109 x 23,5 x 116 mm
Dimensions without front display	109 x 23,5 x 104 mm
Protection	Case: IP 50 Terminals: IP 20
Weight	175 g
Here you can see the different connection types of the UMU-100 Temp. Signal Converter